Updated Nov 21, 2026· 9 min read

Key takeaways

  • Five remote switches for dust collectors, from handheld RF remotes to tool-triggered auto switches, matched to your voltage, size, and shop.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A dust collector parked in a far corner, behind a bench, or up on a wall bracket is easy to forget and annoying to reach. A remote switch fixes that one problem cleanly: the collector sits where its hose runs work best, and you switch it on and off from wherever you happen to be cutting, sanding, or planing. The five switches below cover the three ways to do it — a handheld radio remote, a wall-mounted receiver with a pocket remote, and a box that senses when a tool runs and switches the vacuum on by itself.

Our top pick: PSI Woodworking LR110-3 Long Ranger III 110V Remote Dust Collector Switch. Runner-up: PSI Woodworking LR220-3 Long Ranger III 220V Remote Dust Collector Switch.

Every pick here is rated for a real motor load, not a lamp or a phone charger. That distinction matters, because a dust collector draws a heavy surge the moment its motor spins up, and a light-duty remote outlet can weld its contacts shut or drop out mid-cut. Match the switch to your collector voltage first, then to its horsepower, and only then worry about range or extra remotes.

As an Amazon Associate, we earn from qualifying purchases.

Contents
  1. Quick answer
  2. How to choose
  3. Who should skip
  4. FAQ
  5. Final verdict
  6. Product and ASIN Reference

Quick answer

For a 110 volt collector up to 1-1/2 horsepower, the PSI Long Ranger III 110V is the proven pick, with a belt-clip remote and a five foot receiver cord. Its sibling LR220-3 fits 220 volt collectors up to 2-1/2 horsepower. The Jet DC-RC suits 115 volt Jet units, the iVac Switch Box automates a shop vacuum, and the Ortis ETC-060 is the budget outlet for 120 volt collectors.

PSI Long Ranger III 110V Remote Dust Collector Switch

Specs

  • Voltage: 110V
  • Collector limit: Up to 1-1/2 HP
  • Signal: Radio frequency, user-programmable code
  • Receiver cord: 5 ft
  • Transmitter: Handheld, belt clip, 9V battery
  • Receiver size: 5-1/2 x 2-1/2 x 3 in
  • Transmitter size: 5-1/2 x 1-1/4 x 3/4 in
  • Construction: Heavy-duty commercial quality, FCC approved

The Long Ranger III has been the default remote for small-shop dust collection for years, and the 110 volt version remains the right match for the common 1 to 1-1/2 horsepower single-stage collector. Plug the receiver into a wall outlet, plug the collector into the receiver, and the handheld transmitter switches the collector on and off from anywhere in the shop. The radio signal needs no line of sight, so the remote works from behind a bench or around a corner, and the belt clip keeps it in an apron pocket rather than on a bench where it gets buried under offcuts.

Programming is simple and worth doing once. Each unit ships with its own code, and the receiver can learn extra transmitters, so a second remote can live at the table saw while the first stays at the lathe. One limit to respect: PSI does not recommend this switch for a shop vacuum or any tool with a universal motor, so keep it on induction-motor collectors.

PSI Long Ranger III 220V Remote Dust Collector Switch

Specs

  • Voltage: 220V
  • Collector limit: Up to 2.5 HP
  • Signal: Radio frequency, user-programmable code
  • Receiver cord: 5 ft
  • Transmitter: Handheld, belt clip, 9V battery
  • Construction: Heavy-duty commercial quality, FCC approved
  • In the box: Receiver, hand control, 9V battery

The 220 volt Long Ranger III is the same proven design built for the larger collectors that run on a 220 volt circuit — the 2 and 2-1/2 horsepower units that anchor a ducted small shop. It carries the same receiver-and-transmitter layout, the same user-programmable code, and the same belt-clip remote. As with the 110 volt version, keep it off shop vacuums and universal-motor tools.

Jet RF Remote Control for 115V Dust Collectors

Specs

  • Model: DC-RC, stock number 708636C
  • Voltage: 115V, single phase
  • Collector limit: Up to 1-1/2 HP
  • Outlet rating: 20A minimum
  • Circuit breaker: 20A minimum
  • Signal: Radio frequency
  • Use: Indoor only
  • Weight: 1.5 lb net, 1.75 lb gross
  • Warranty: 90 days

Jet built this remote as the factory accessory for its own 115 volt dust collectors, and it fits any 115 volt collector up to 1-1/2 horsepower that meets the 20 amp outlet and breaker minimums. The fob looks like a car remote and switches the collector on and off from up to 50 feet away, with no wiring and no line of sight needed. A DIP-switch code on the main unit and the transmitter keeps neighboring units from interfering, which matters in a shared shop or a two-collector garage.

The 90 day warranty is short next to the rest of this list, and the 20 amp minimums deserve a real check before ordering — a 15 amp circuit will not do. For a Jet collector owner, though, the fit is exact. The 230 volt sibling, stock number 708636D, covers 3 horsepower collectors on 230 volts.

iVac Switch Box SB-NA

Specs

  • Model: SB-NA
  • Voltage: 115V, 15A
  • Tool receptacle: 115V, 15A, 15A circuit breaker
  • Vacuum receptacle: 115V, dust collector up to 1 HP, shop vacuum up to 5 peak HP
  • Switch-on delay: 0.5 to 2.0 seconds
  • Switch-off delay: About 6 seconds
  • Housing: 4.625 x 4.625 x 1.875 in, ABS 94VO
  • Tool power cord: 54 in
  • Vacuum power cord: 19.5 in
  • Modes: Auto, Off, On
  • Certifications: TUV, UL STD 508, CSA C22.2 No. 14

The iVac Switch Box takes a different approach from the handheld remotes: it watches the tool and switches the vacuum on by itself. Plug a power tool into the tool receptacle and a shop vacuum or small dust collector into the vacuum receptacle, and the box powers the vacuum a fraction of a second after the tool spins up, then keeps it running about six seconds after the tool stops so the hose clears. That delay matters, because it staggers the two motors and keeps their combined surge off one circuit at the same instant.

Two separate input cords let the tool and the vacuum run from two separately protected circuits when their combined draw would trip a single breaker. The 1 horsepower dust collector limit is the real constraint — this box suits a benchtop collector or a shop vacuum, not a 2 horsepower stationary unit. For a small shop built around a shop vacuum and a few portable tools, it is the most automatic option here, and it needs no remote to lose.

Ortis Wireless Remote Switch for Dust Collectors

Specs

  • Model: ETC-060
  • Voltage: 120V
  • Signal: Radio frequency
  • Range: Up to 328 ft
  • Casing: UL94 V0 flame-retardant
  • Outlets and cables: UL-certified, with surge protection
  • Relay: Built-in UL-listed relay
  • Weight: 11.7 oz
  • Package size: 5.63 x 4.8 x 2.24 in
  • Material: Plastic
  • Certifications: IEC, UL

The Ortis ETC-060 is the budget entry here and the simplest to use: a wireless outlet receiver with a handheld remote, rated for a 120 volt dust collector. The headline figure is the 328 foot radio range, which reaches across any home shop and through walls and doors, and the UL94 V0 flame-retardant casing plus UL-certified outlets, cables, surge protection, and relay give it a safety story the cheapest no-name outlets lack. One remote button switches the collector on and off, with no programming and no wiring.

Two things to note before ordering. First, the listing is inconsistent about the remote battery: the title says a battery is included, while the technical details say batteries are not included, so have a spare on hand. Second, the listing publishes no amperage figure, so check the receiver rating against your collector draw before plugging in a 1-1/2 horsepower unit. For a smaller 120 volt collector in a one-car garage, it is a fair budget pick.

How to choose

Match voltage first. A 110 or 115 volt switch cannot run a 220 volt collector, and a 220 volt switch will not work on a 110 volt circuit, so read the collector nameplate before anything else. Then match horsepower: the switch rating must meet or exceed the collector motor, with margin for the surge at switch-on. A 15 amp circuit caps what a 110 volt switch can feed, so a 2 horsepower collector on 220 volts needs the 220 volt Long Ranger III or the Jet 230 volt unit, not a 110 volt remote.

Next, decide how you want to control it. A handheld remote suits a collector you switch on and off by hand at each tool. An auto switch suits a shop vacuum or a small collector paired with one tool at a time, where the tool itself should trigger the vacuum. Range matters less than most listings suggest — 50 feet covers any home shop — while a second remote or a belt clip matters more, because a remote that lives in one spot gets left behind.

Finally, check the fine print that listings bury: minimum breaker size, whether the unit suits universal-motor tools, and whether the remote uses a standard battery you can replace. The Jet needs a 20 amp circuit, the PSI units are not for shop vacuums, and the iVac caps dust collectors at 1 horsepower.

Who should skip

Skip a plug-in remote entirely if your collector already has a remote built in, as several wall-mount units do — adding a second switch in series only creates confusion about which one is on. Skip the handheld remotes if your collector runs on a magnetic switch box or a three-phase supply, since none of these five is built for that wiring.

A wired wall switch or a contactor is the better call for a permanently ducted shop with a 3 horsepower collector, and a shop vacuum with its own tool-triggered outlet needs no add-on at all. If you run one collector from a single fixed station and never move around the shop, the walk to the switch is short enough that a remote adds little.

FAQ

Can I use a remote switch on any dust collector?

No. Match the switch voltage to the collector voltage, and match the switch rating to the collector horsepower and the circuit breaker size. A 110 volt switch will not run a 220 volt collector, and a switch rated below the motor draw can fail or trip.

Will a remote switch work with a shop vacuum?

Only some of them. The iVac Switch Box is built for shop vacuums up to 5 peak horsepower, while PSI states its Long Ranger III is not for shop vacuums or universal-motor tools. Read the listing before ordering.

Do I need line of sight for the remote to work?

No, for the radio-frequency remotes here. The PSI, Jet, and Ortis remotes all use radio signals that pass through walls and around benches, unlike infrared remotes that need a clear path.

Can one remote control two dust collectors?

Yes, with the PSI Long Ranger III, which lets several receivers answer one transmitter and several transmitters operate one receiver. The other remotes here are one-to-one, so a second collector needs its own unit.

Final verdict

For most small shops, the PSI Long Ranger III 110V is the pick that has earned its keep: a simple plug-in remote, a belt-clip transmitter, and a rating that covers the common 1 to 1-1/2 horsepower collector. Shops on 220 volts should take the LR220-3 instead, and Jet owners should take the DC-RC that matches their collector. The iVac Switch Box is the right answer when a shop vacuum does the collecting and the tool should trigger it, while the Ortis ETC-060 is the budget wireless outlet for a smaller 120 volt collector — with its battery and amperage questions checked first.

Product and ASIN Reference

Product ASIN
PSI Woodworking LR110-3 Long Ranger III 110V Remote Dust Collector Switch B00004S9AI
PSI Woodworking LR220-3 Long Ranger III 220V Remote Dust Collector Switch B00004S9AG
Jet RF Remote Control for 115V Dust Collectors (DC-RC) B005CZD3MU
iVac Switch Box SB-NA B0035YGLZG
Ortis Wireless Remote Switch for Dust Collectors, 120V (ETC-060) B0CRRQXPTQ
F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Dust Collector Remote Switches for Small ShopsCheck price on Amazon

Related guides

Browse all Buying Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.