Key takeaways
- Compare the best wood plugs for hiding screw holes: tapered face-grain oak, maple button plugs and flat-head packs in 3/8, 1/2 and 3/4 inch sizes.
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Buying Guides › Best Wood Plugs: Tapered, Flat and Button Plugs for Screws
A counterbored screw hole is only finished when something fills it. A wood plug does that job with real timber rather than filler: glued into the hole, trimmed or sanded level, and finished with the surrounding board, it hides the fastener and protects the screw head from moisture and grime. The three plug families in this roundup cover the whole range of that work, from flat heads that vanish under stain to domed buttons that stay visible as a deliberate detail.
The five packs below span the sizes furniture and cabinet work use most: 3/8 inch for small counterbores, 1/2 inch as the all-purpose standard, and 3/4 inch for wide holes in heavy stock. Species run from mixed hardwood to maple and red oak, and one pack is cut with face grain so the plug reads like part of the board rather than a round patch. Match the diameter to your counterbore first, then pick the style and species that suit the piece.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most furniture and cabinet work, buy the General Tools 312012 button plugs: fifty 1/2-inch hardwood buttons with tapered bodies that glue in fast and cover the hole edge. If the plug must disappear, the General Tools 315012 flat heads sand flush instead. Maple fans should pick the Woodpeckers 100-pack, wide counterbores need the WidgetCo 3/4-inch face-grain oak, and the 200-piece flat-head pack covers small 3/8-inch holes in bulk.
Top picks
General Tools 312012 Button Plugs, 1/2 Inch, 50 Pack
The button plug is the oldest way to hide a screw, and this pack is the standard form of it. Each plug has a domed head that sits proud of the surface and overlaps the rim of the hole, so minor drilling wander stays hidden under the cap. The body below the head is slightly tapered, which wedges the plug tight as it seats and keeps glue contact around the full shank. Grain runs across the width of the plug, the orientation that reads most naturally on a board face. Fifty plugs per pack suits a bench, a bookcase build, or a run of cabinet doors, and the hardwood takes stain and paint like the surrounding stock. This is the mid-range all-rounder of the group and the pack to keep in the hardware drawer.
Specs
- :
- Brand: General Tools
- Model: 312012
- Diameter: 1/2 inch
- Style: Button head (mushroom), slightly tapered body
- Material: Hardwood
- Grain direction: Across the plug width
- Height: 10 mm (about 3/8 inch)
- Count: 50
General Tools 315012 Flat Head Plugs, 1/2 Inch, 45 Pack
Where the button plug shows, the flat head disappears. These 1/2-inch plugs sit in the counterbore with a flat top that glues in slightly proud, then pares and sands dead level with the surface, leaving a plain round patch that finishes with the board. They are the right pick for painted work, stained casework where a dome would look out of place, and any repair where the goal is to make the hole forgettable. The hardwood is FSC ethically sourced, per the maker listing, and the 45-count pack is a budget tier staple for small shops. Pair them with a sharp chisel: trimming the plug close before sanding keeps the surrounding finish intact and the patch crisp.
Specs
- :
- Brand: General Tools
- Model: 315012
- Diameter: 1/2 inch
- Style: Flat head, flush fit
- Material: Hardwood, FSC ethically sourced
- Count: 45
Woodpeckers Maple Button Top Plugs, 1/2 Inch, 100 Pack
Maple is the species that turns a plug into a design feature, and this 100-pack is built for that role. The plugs are pre-sized and sanded with a domed button top, so each one drops in with a consistent profile and a clean shoulder line. The shank is tapered for a snug fit that holds with a thin film of glue, and the pale, tight-grained maple contrasts gently against darker woods or blends into maple and birch work. One hundred plugs per pack covers a full furniture project with matching buttons on every joint, which matters because a visible detail only works when every instance looks identical. This is the mid-range pick for benches, cutting boards, and mission-influenced furniture where the buttons are meant to be seen.
Specs
- :
- Brand: Woodpeckers
- Diameter: 1/2 inch
- Species: Maple
- Style: Button top (domed), tapered shank
- Finish: Sanded, unfinished
- Count: 100
WidgetCo Oak Wood Plugs, Face Grain, 3/4 Inch
Most plugs are cut so the end grain faces out, which drinks stain darker than the board around it. These WidgetCo plugs solve that with face grain: the grain on the plug face runs in the same plane as the workpiece, so the patch takes finish at a similar rate and reads as grain rather than a bullseye. The 3/4-inch diameter covers the wide counterbores used for bolts and large screws in heavy stock, table bases, and bed frames. Red oak matches the most common furniture hardwood in North American shops, and the tapered body seats firmly with glue. The plugs arrive unfinished and sandable, ready for the same schedule as the project. This is the premium pick of the roundup, justified by the grain orientation rather than the count.
Specs
- :
- Brand: WidgetCo
- Diameter: 3/4 inch
- Species: Red oak
- Grain: Face grain
- Style: Tapered
- Finish: Unfinished, sandable
- Count: Not stated in the listing
Flat Head Wooden Screw Hole Plugs, 3/8 Inch, 200 Piece
Small counterbores need small plugs, and they consume them quickly. This bulk pack holds 200 flat-head plugs at 3/8 inch, the size that covers the screws used in drawer boxes, small casework, and jig building. The flat heads glue in and sand flush, so a whole run of holes can be filled, trimmed, and finished in one session without rationing the supply. The listing describes the material simply as wood and does not name a species, so treat these as a utility pack for painted work or hidden faces rather than a grain-matched repair on show surfaces. As a budget tier bulk buy, it is the pack to open when the project has dozens of holes and the finish is paint.
Specs
- :
- Diameter: 3/8 inch
- Style: Flat head, flush fit
- Material: Wood (species not specified in the listing)
- Count: 200
How to choose
Match the diameter to the counterbore, not the screw. The plug fills the wide, shallow hole above the screw head, so measure that bore and buy the plug in the same nominal size: 3/8 inch for small work, 1/2 inch for most furniture screws, 3/4 inch for bolts and heavy joints. A plug one size down rattles and shows a glue ring; one size up splits the rim of the hole when driven.
Pick the style by how visible the repair should be. Flat-head plugs sand level and nearly vanish, which suits stained and painted casework. Button plugs keep a domed cap above the surface and cover the hole edge, which hides slightly ragged drilling and reads as a deliberate detail on benches and frames. Tapered bodies, found on several packs above, wedge tight and forgive small variations in hole size.
Grain orientation decides how the patch takes finish. End-grain plug faces absorb stain faster and usually dry darker than the board, leaving a visible circle. Face-grain plugs, like the WidgetCo oak, behave more like the surrounding wood. When the plug must blend, match the species as well: an oak plug in a walnut board stays obvious no matter how well it is sanded.
Finally, buy the count that matches the work pattern. A 45 or 50 pack serves occasional repairs and single builds. The 100 and 200 packs suit production habits, where running out mid-project means a visible plug style change halfway through a piece.
Who should skip
Skip this roundup if you cut your own plugs from offcuts with a plug cutter: shop-cut plugs match the exact board, grain and all, and no purchased pack can equal that blend on a prized repair. Skip these straight and tapered plugs for pocket holes, which are angled and need dedicated pocket-hole plugs shaped for that slope. Skip wood plugs entirely where a removable cover is the point, such as access panels that must open again; a glued plug is meant to stay. And skip the small diameters for structural bolt holes in outdoor work, where marine bungs and exterior joinery follow different rules.
FAQ
What is the difference between a button plug and a flat-head plug?
A button plug has a domed head that stays above the surface as a visible cap, covering the rim of the hole. A flat-head plug sits inside the counterbore and is trimmed and sanded level, so the repair reads as a plain round patch in the surface.
Should the plug grain run in the same direction as the board?
Yes, when the plug will show. Grain running with the board takes stain and finish at a similar rate and catches light the same way, so the patch blends. A plug turned across the grain, or one showing end grain, usually dries darker and stays visible.
How do I fit a plug that feels slightly loose or tight?
For a loose plug, add a thin film of glue and wrap the shank with a sliver of veneer or a turn of paper tape to build diameter. For a tight plug, sand the shank lightly and evenly rather than driving harder, since forcing a plug can split the rim of the hole.
Can wood plugs be used outdoors?
They can, with limits. Use a waterproof glue and a durable species, and expect the plug face to weather at its own rate. For deck and marine work, dedicated bungs cut for that purpose are the better buy, since they are sized and shaped for exterior joints.
Final verdict
Keep one pack of each style in the shop and most holes stop being a problem. The General Tools 312012 buttons are the default for visible, forgiving coverage, and the 315012 flat heads handle the repairs that must disappear. The Woodpeckers maple pack serves projects where the plug is part of the design, the WidgetCo face-grain oak covers wide holes with the least visible patch, and the 200-piece 3/8-inch pack feeds high-volume small work. Buy by counterbore diameter first, then by grain and species.
Product and ASIN Reference
| Name | ASIN |
|---|---|
| General Tools 312012 Button Plugs, 1/2 Inch, 50 Pack | B00INI61LS |
| General Tools 315012 Flat Head Plugs, 1/2 Inch, 45 Pack | B00INI66UO |
| Woodpeckers Maple Button Top Plugs, 1/2 Inch, 100 Pack | B08BH43X4N |
| WidgetCo Oak Wood Plugs, Face Grain, 3/4 Inch | B00LA1BDXG |
| Flat Head Wooden Screw Hole Plugs, 3/8 Inch, 200 Piece | B0BLSZY6Z2 |
Related guides
Read next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!