Updated Nov 22, 2026· 9 min read

Key takeaways

  • Compare the best saw files for sharpening hand saws: regular, slim, extra slim and double extra slim taper files from PFERD, Bahco and Nicholson.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A dull hand saw does not need replacing; it needs a file that fits its teeth. Saw files are triangular taper files made for one job: riding in the gullet between two saw teeth and restoring the cutting edge on each tooth face. The taper class is the whole decision. Regular, slim, extra slim and double extra slim describe how wide the file face is, and the face has to match the gullet — wide enough to span the tooth, narrow enough not to foul the tooth beside it.

Our top pick: PFERD 17018 Regular Taper Saw File, 6 Inch. Runner-up: Bahco 4-186-06-2-2 ERGO Slim Taper Saw File, 6 Inch.

The five files below form a complete ladder, from a wide regular taper for coarse rip teeth down to double extra slim tapers for the finest crosscut teeth. Two arrive with fitted handles and three are bare tang files that take a handle of your choice. All are single-purpose saw files with cut faces and edges on three sides, ground to the sixty-degree tooth angle that hand saw teeth use.

As an Amazon Associate, we earn from qualifying purchases.

Contents
  1. Quick answer
  2. Top picks
  3. How to choose
  4. Who should skip
  5. FAQ
  6. Final verdict
  7. Product and ASIN Reference

Quick answer

For most hand saw sharpening, buy the Bahco 4-186-06-2-2: a 6-inch slim taper file with a fitted ERGO handle, sized for the mid-range teeth on general-purpose saws. Coarse rip teeth need the wider PFERD 17018 regular taper, fine crosscut teeth need an extra slim or double extra slim taper, and the Nicholson 21874N covers the finest gullets.

Top picks

PFERD 17018 Regular Taper Saw File, 6 Inch

The regular taper is the widest class in this roundup, and the PFERD 17018 is the file for coarse teeth: big rip saw gullets, coarse crosscut teeth, and older saws whose teeth were filed with generous spacing. At 15/32 inch across the face it is far broader than the slim files below, so it sits in a wide gullet without rocking and keeps the stroke honest. PFERD cuts this file on three sides and three edges in second cut, the grade the maker specifies for universal sharpening work on steel. It ships without a handle in industrial packaging, so pair it with a file handle of your choice before use. If your bench holds one coarse rip saw that does the heavy work, this is the file that keeps it cutting. It is the premium pick here on build and the natural anchor for the coarse end of the ladder.

Specs

  • :
  • Brand: PFERD
  • Length: 6 in
  • Face width: 15/32 in
  • Taper class: Regular taper
  • Shape: Three square (triangular)
  • Cut: Second cut
  • Handle: Not included, tang only
  • Model: 17018

Bahco 4-186-06-2-2 ERGO Slim Taper Saw File, 6 Inch

The slim taper is the class most hand saws need, and this Bahco is the ready-to-work version of it. The 6-inch file measures 150 by 8.4 mm, narrow enough for the mid-range teeth on general-purpose crosscut and rip saws, and it arrives with the two-component ERGO grip already fitted, so there is no handle to source or seat before the first tooth. The cut is second cut on a triangular blank, with the faces doing the sharpening and the edges clearing the gullet corners. A fitted handle matters more on a saw file than on most files: sharpening runs tooth after tooth in the same posture, and a shaped grip keeps the wrist angle steady across a full saw. For a single file that covers the saws a furniture shop uses daily, this is the mid-range pick and the one to buy first.

Specs

  • :
  • Brand: Bahco
  • Length: 6 in (150 mm)
  • Face width: 8.4 mm
  • Taper class: Slim taper
  • Shape: Triangular
  • Cut: Second cut
  • Handle: Included, ERGO two-component grip
  • Model: 4-186-06-2-2

Crescent Nicholson Extra Slim Taper File, 5 Inch (14599MN)

Moving down the ladder, the extra slim taper suits finer teeth: crosscut saws with closely spaced points, dovetail saws, and the finer end of the general-purpose range. This Nicholson is 5 inches long, the shorter length pairing with the narrower face to give the control fine teeth demand, since a long file on small teeth invites a wandering stroke. It is single cut, the traditional saw file cut, which leaves a keener edge on the tooth face than a double cut of the same grade. The file is a bare tang pattern with no handle included, so it drops into any standard file handle you already own. Nicholson has made American pattern saw files for generations, and this carded single is the budget-friendly way into the extra slim class: one file, no extras, exactly the tool the fine-toothed saws in the rack ask for.

Specs

  • :
  • Brand: Crescent Nicholson
  • Length: 5 in
  • Taper class: Extra slim taper
  • Shape: Triangular
  • Cut: Single cut
  • Handle: Not included, tang only
  • Model: 14599MN

Bahco 4-188-05-2-2 ERGO Double Extra Slim Taper Saw File, 125 mm

Double extra slim is the finest taper class in the Bahco line, and this is the handled version of it. At 125 mm long with a face only 5.0 mm wide, it fits the small gullets of fine crosscut saws, dovetail and gent’s saws, and other closely pitched teeth where an extra slim file already feels clumsy. The ERGO two-component handle is fitted at the factory, which suits this class well: fine teeth need light, even pressure, and a shaped grip helps more than raw effort. The cut is second cut across three faces and edges, ground for the sixty-degree tooth form. Where the Nicholson above covers fine teeth on a bare tang, this Bahco covers the finest teeth with the handle included, and the pair of them spans the whole fine end of a saw till. It is the premium choice for small teeth.

Specs

  • :
  • Brand: Bahco
  • Length: 125 mm (5 in)
  • Face width: 5.0 mm
  • Taper class: Double extra slim taper
  • Shape: Triangular
  • Cut: Second cut
  • Handle: Included, ERGO two-component grip
  • Model: 4-188-05-2-2

Nicholson Double Extra Slim Taper File, 6 Inch (21874N)

The second double extra slim in this roundup takes the opposite approach to the Bahco: a 6-inch bare file, single cut, with a face 15/64 inch wide. Nicholson describes this pattern as expertly made for filing saws with sixty-degree angle teeth, with edges set and cut for working the gullets between teeth, and the single cut construction leaves a smooth, keen finish on each tooth face. The extra inch of length over the 5-inch files gives a longer stroke on fine teeth, which some filers prefer for keeping a rhythm across a long tooth line. No handle is included, so seat it in a handle before use — a bare tang should never be pushed by hand. As a second double extra slim it overlaps the Bahco in class, but the longer body, the single cut and the bare tang make it a different tool in the hand, and it is the budget route into the finest class.

Specs

  • :
  • Brand: Nicholson
  • Length: 6 in
  • Face width: 15/64 in
  • Taper class: Double extra slim taper
  • Shape: Triangular
  • Cut: Single cut
  • Handle: Not included, tang only
  • Model: 21874N

How to choose

Begin with the saw, not the file. Count the teeth along an inch of the tooth line, or simply judge the gullet size by eye: the file face should sit in one gullet, span the full tooth face, and clear the tooth behind it. Coarse rip teeth with wide gullets take the regular taper. The mid-range teeth on most crosscut and panel saws take a slim taper. Fine teeth take extra slim, and the finest dovetail and crosscut teeth take double extra slim. Filing with a file one class too wide rounds the gullets and thins the teeth; one class too narrow cuts a groove instead of a flat tooth face.

Length follows class. Five-inch files pair with the slimmer classes and give control on small teeth, while six-inch files give a longer, steadier stroke on larger teeth. Cut matters less than fit: single cut is the traditional saw file finish and leaves a keen edge, while second cut in the PFERD and Bahco lines removes metal a touch faster on neglected teeth. Handles are the last decision. Two picks here arrive with fitted ERGO grips; the three bare tang files need a handle, and any plain turned-wood or plastic file handle that seats firmly will do. Buy the class your most-used saw needs first, then fill the ladder as other saws join the rack.

Who should skip

Skip this roundup if your saws are hardpoint or disposable saws with induction-hardened teeth — those teeth are harder than a file and cannot be sharpened this way; the file will skate and dull itself. Skip it if the teeth are so worn, uneven or damaged that they need jointing and re-shaping before any sharpening file touches them, since that work calls for a flat mill file and a saw set alongside the taper file. And skip the bare tang picks if you own no file handle and want to file today; choose one of the two handled Bahco files instead, because a tang driven into a palm is an injury waiting for a moment of inattention.

FAQ

Which taper class fits a general-purpose crosscut saw?

A slim taper fits most general-purpose crosscut saws, whose teeth sit in the middle of the size range. The Bahco 4-186-06-2-2 is the slim pick here. If the teeth look small and closely spaced, step down to extra slim; a file that is slightly narrow still sharpens, while one that is too wide damages the neighbouring tooth.

Can one saw file sharpen every saw in the shop?

No. Taper classes exist because gullets vary so widely, from coarse rip teeth to fine dovetail teeth. One slim taper covers the middle of the range well, but coarse teeth need the regular taper width and the finest teeth need double extra slim. Two files, one slim and one extra slim, cover most home shop racks.

Do saw files wear out, and how will I know?

Yes, saw files are consumable tools. The teeth on a file dull gradually, and the sign is a stroke that polishes instead of cutting, with the file sliding over the tooth rather than biting. Fine classes wear fastest because so little metal does the work. A dull saw file is done; there is no practical way to renew its cut at the bench.

Why does the file need a handle if it is only pushed lightly?

The tang is a pointed spike meant to anchor inside a handle, not a grip. Even light filing pressure can drive an unhandled tang into the palm if the file catches or the stroke stalls. A handle also keeps the file aligned with the tooth face, which is what keeps the sharpening angle even from tooth to tooth.

Final verdict

Match the taper class to the tooth and any of these five will sharpen well. The Bahco 4-186-06-2-2 slim taper with its fitted handle is the single best buy for a typical saw rack, the PFERD 17018 anchors the coarse end, and the Nicholson 14599MN, Bahco 4-188-05-2-2 and Nicholson 21874N cover fine and finest teeth in handled, bare and single-cut forms. Buy the class your most-used saw needs, add a handle to the bare files, and the ladder is complete.

Product and ASIN Reference

Product name ASIN
PFERD 17018 Regular Taper Saw File, 6 Inch B0742PVWFY
Bahco 4-186-06-2-2 ERGO Slim Taper Saw File, 6 Inch B001NIDEZQ
Crescent Nicholson Extra Slim Taper File, 5 Inch (14599MN) B07YD5WY8C
Bahco 4-188-05-2-2 ERGO Double Extra Slim Taper Saw File, 125 mm B001NIEH6G
Nicholson Double Extra Slim Taper File, 6 Inch (21874N) B001R1X058
F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Saw Files: Taper Files for Sharpening Hand…Check price on Amazon

Related guides

Browse all Buying Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.