Key takeaways
- The best magnetic featherboards for table saws and router tables compared: switchable magnet hold, fence-mounted options, starter kits and fit checks.
What's inside
- Table of Contents
- Why Choose a Magnetic Featherboard
- Magswitch Universal Featherboard Pro (81101303)
- Magswitch Pro Table Featherboard (8110328)
- Magswitch Vertical Featherboard Pro (81101302)
- Magswitch Woodworking Starter Kit (8110134)
- Magswitch Reversible Featherboard (8110131)
- How to Choose a Magnetic Featherboard
- FAQ
- Conclusion
- Table of Contents
- Why Choose a Magnetic Featherboard
- Magswitch Universal Featherboard Pro (81101303)
- Magswitch Pro Table Featherboard (8110328)
- Magswitch Vertical Featherboard Pro (81101302)
- Magswitch Woodworking Starter Kit (8110134)
- Magswitch Reversible Featherboard (8110131)
- How to Choose a Magnetic Featherboard
- FAQ
- Conclusion
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Magnetic Featherboards for Table Saws and Routers
- Top Pick: Magswitch Universal Featherboard Pro (81101303)
- Runner-up: Magswitch Pro Table Featherboard (8110328)
- Also consider: Magswitch Vertical Featherboard Pro (81101302)
The best magnetic featherboard for most shops is a switchable-magnet model that locks anywhere on a cast iron or steel top, because it removes the miter slot from the setup entirely. The Magswitch Universal Featherboard Pro is the strongest all-round pick, with a published breakaway force of 126 pounds, wide gasketed magnet pads that hold even over a miter slot, and bump stops that double it as a crosscut stop. The older Pro Table Featherboard suits heavier ripping, the Vertical Featherboard Pro handles fence-mounted hold-down work, and the Starter Kit is the sensible entry point if you want the wider Magswitch workholding system.
Every pick below uses on/off switchable magnets rather than fixed magnets or slot hardware, so each one positions in seconds and lifts away cleanly when the cut changes. All of them need a ferrous surface to grip. If your saw or router table has an aluminum or phenolic top, none of these will hold, and a miter-slot or clamp-on featherboard is the right tool instead.
As an Amazon Associate, we earn from qualifying purchases.
Contents
- Table of Contents
- Why Choose a Magnetic Featherboard
- Magswitch Universal Featherboard Pro (81101303)
- Magswitch Pro Table Featherboard (8110328)
- Magswitch Vertical Featherboard Pro (81101302)
- Magswitch Woodworking Starter Kit (8110134)
- Magswitch Reversible Featherboard (8110131)
- How to Choose a Magnetic Featherboard
- FAQ
- Conclusion
Table of Contents
- Why Choose a Magnetic Featherboard
- Magswitch Universal Featherboard Pro (81101303)
- Magswitch Pro Table Featherboard (8110328)
- Magswitch Vertical Featherboard Pro (81101302)
- Magswitch Woodworking Starter Kit (8110134)
- Magswitch Reversible Featherboard (8110131)
- How to Choose a Magnetic Featherboard
- FAQ
- Conclusion
- Product and ASIN Reference
Why Choose a Magnetic Featherboard
A conventional featherboard is captive to the miter slot. The bar has to match the slot width, the board can only sit where the slot runs, and on a router table the slot may be nowhere near the fence line you actually use. A magnetic featherboard removes that constraint. You set it down on any clean steel or cast iron surface, turn the knobs to switch the magnets on, and the fingers press the stock exactly where the cut needs support.
That freedom matters most in two situations. The first is repeat work, where the featherboard moves between the table saw, band saw and router table in the same session. The second is fence work, where a fence-mounted magnetic board presses stock down against the table in a way a slot-mounted board cannot reach. The trade-offs are just as clear: magnetic boards sit at the premium end of the featherboard market, they are useless on non-ferrous tops, and their hold depends on a clean, flat contact patch, so a dusty or rusty table weakens them.
Magswitch Universal Featherboard Pro (81101303)
The Universal Featherboard Pro is the current flagship table model and the easiest recommendation in this group. It presses stock against the fence from either side, so it works for left-handed and right-handed fence positions without being rebuilt or flipped end for end. Its wide base magnets sit on compressible gaskets, which is why the manufacturer rates it to keep its grip even when part of the footprint crosses a miter slot, a common failure point for narrower magnetic bases.
Two micro-adjustable bump feet at the ends turn it into more than a featherboard. Set the board across the feed path and the feet act as repeatable stops for crosscuts and slots, which suits batch work on drawer parts and frame rails. At 1.2 pounds it is light enough to move one-handed, and the published shear rating above 50 pounds is the figure that matters in use, because sideways load is what a rip cut applies. This is the premium pick for a cast iron cabinet saw or a steel-topped router table that sees daily work.
Specs:
- Model: 81101303
- Nominal maximum breakaway force: 126 lb (57 kg)
- Nominal maximum shear: 50+ lb (23+ kg)
- Net weight: 1.2 lb (0.55 kg)
- Footprint: 5.29 x 6.23 in (134.4 x 158.2 mm)
- Bump stop adjustment range: 0.55 in (14 mm)
- Wide base magnets with compressible gaskets for grip over miter slots
- Two micro-adjustable bump stops; works in left- or right-handed positions
Magswitch Pro Table Featherboard (8110328)
The Pro Table Featherboard is the long-running heavy-duty option, built around two 30 mm switchable magnets with a published holding force of 150 pounds. That larger magnet pair and the bigger 8.5-inch body make it the better choice for long, heavy rips where a smaller board can creep. It is reversible, so it serves right-side and vertical applications, and the top face accepts the optional Vertical Featherboard attachment, letting one base hold stock against the fence and down against the table at the same time.
Because the magnets are integrated, there is no separate base to buy and nothing to assemble before the first cut. The size cuts both ways: the footprint needs a clear patch of table, so on compact contractor saws with crowded tops it can crowd the fence. For a full-size cast iron saw top, though, this is the mid-to-premium workhorse of the range, and its long production run means the design is well documented by the manufacturer.
Specs:
- Model: 8110328
- Magnets: two 30 mm switchable Magswitch magnets
- Magnetic holding force: 150 lb
- Dimensions: 8.5 x 7.1 x 2.3 in
- Reversible for right-side and vertical applications
- Accepts the optional Vertical Featherboard attachment for stacked setups
- Color: yellow
Magswitch Vertical Featherboard Pro (81101302)
The Vertical Featherboard Pro solves a different problem. Instead of sitting on the table and pressing sideways, it clamps to a ferrous fence, including Biesemeyer-style fences, and its feathers press the workpiece down against the table. That downward pressure is what stops thin stock from riding up or fluttering as it passes the blade, and it is the setup to choose for ripping thin strips and sheet goods that a table-mounted board cannot control from above.
The vertical adjustment range runs from +1.45 inches to -2.87 inches, so the feathers can be matched to stock height across a wide span, and the manufacturer notes it can be paired with a second unit so one board holds the stock down before the blade and another after it. The published breakaway force is 150 pounds with a shear rating of 40 pounds. It is a premium, single-purpose tool, and it only earns its place if your fence is steel and your work includes tall or thin stock that lifts.
Specs:
- Model: 81101302
- Nominal maximum breakaway force: 150 lb (68 kg)
- Maximum shear: 40 lb (18 kg)
- Vertical adjustment range: +1.45 in to -2.87 in (+37 mm to -73 mm)
- Mounts to ferrous table saw fences, including Biesemeyer-style fences
- Applies downward pressure to prevent ride-up during feeding
- Can be paired with a second unit for hold-down before and after the blade
- UPC: 878628005130
Magswitch Woodworking Starter Kit (8110134)
The Starter Kit is the mid-range way into the wider Magswitch system. Rather than a single-purpose featherboard, it bundles a Universal Mounting Base, a Reversible Featherboard Attachment and two MagJig 150 magnets, each rated at 150 pounds of holding force. The base sits on any steel or cast iron tabletop, the magnets switch on to lock it, and attachments mount to the base as the job changes.
That modularity is the reason to buy it. The same base later accepts the brand’s resaw guide, roller guide and thin stock jig, so the kit suits a shop that expects to build several magnetic jigs over time. The compromise is setup: swapping attachments takes longer than grabbing a dedicated featherboard, and the featherboard attachment on its own is a simpler board than the Pro models above. For a first magnetic purchase that will grow with the shop, it is the most flexible option here.
Specs:
- Model: 8110134
- Includes: Universal Mounting Base, Reversible Featherboard Attachment, two MagJig 150 magnets
- MagJig 150 holding force: 150 lb each
- Base mounts to any steel or cast iron tabletop
- Attachments swap onto the base for different workholding tasks
- UPC: 878628001071
Magswitch Reversible Featherboard (8110131)
The Reversible Featherboard is the budget entry in this roundup, with a catch: it is an attachment, not a standalone tool. It mounts to the Magswitch Universal Mounting Base and MagJigs, which are sold separately or supplied in the Starter Kit above, so it only makes sense if you already own the base or plan to buy the kit. In return it is the lowest-priced way to add a second featherboard to an existing Magswitch setup.
The board itself is reversible for left- and right-hand feeds, and its low-profile design is intended for small tables and fences where a full-size board would not fit. It also accepts the Vertical Featherboard Attachment, so a Starter Kit plus this board and the attachment covers sideways and downward pressure together. The body is molded from ABS UL94VO material, the same durable plastic used across the range. Bought alone without the base, it cannot be used at all, so treat it strictly as a system add-on.
Specs:
- Model: 8110131
- Reversible for left- and right-hand feeds
- Mounts to the Universal Mounting Base and MagJigs (sold separately)
- Low-profile design for small tables and fences
- Accepts the Vertical Featherboard Attachment
- Material: ABS UL94VO
- Package weight: 0.32 kg
How to Choose a Magnetic Featherboard
Start with the surface. Magnetic featherboards need cast iron or steel; check your saw top, router table top and fence with a kitchen magnet before ordering anything. Ground or polished cast iron gives the strongest hold, and the contact patch must be clean and flat, so wax and dust buildup directly reduce grip.
Next, match the board to the pressure direction. Table-mounted boards press stock sideways against the fence and suit general ripping and routing. Fence-mounted vertical boards press down and suit thin, tall or lifting stock. Many shops eventually run one of each, which is why the stacking and pairing options in the specs matter.
Then compare the published force figures carefully. Breakaway force measures a straight pull off the surface, while shear measures sideways sliding, and shear is the load a cut actually applies. A board with a high breakaway figure but modest shear can still creep during a heavy rip. Footprint matters too: wider bases with gaskets keep more hold when part of the base crosses a miter slot.
Finally, decide between a dedicated board and the modular system. A dedicated model is faster for one repeated job. The Starter Kit costs more effort per setup but spreads its magnets and base across many jigs, which is better value for a shop that will use magnetic workholding beyond featherboards.
FAQ
Will a magnetic featherboard work on an aluminum table saw top?
No. Switchable magnets need a ferrous surface, so they grip cast iron and steel but cannot hold on aluminum, phenolic or laminate tops. On a non-ferrous top, use a miter-slot featherboard that matches your slot size, or a clamp-on model that grips the table edge or fence.
Can magnetic featherboards be used on a router table?
Yes, provided the router table top or fence is steel or cast iron. A table-mounted board presses stock against the fence for profile work, and a vertical board can press down on wider panels. Keep the fingers clear of the bit, set the pressure light enough for a smooth feed, and check the hold again after the first pass, since router vibration can shift a marginal setup.
How much holding force does a featherboard need?
Look at the shear rating first, because sideways load is what feeding applies. The models here publish shear figures from 40 pounds upward, which is ample for guiding stock that you are also feeding by hand. Breakaway force matters mainly for fence-mounted boards resisting lift. More force is not automatically better: the board still has to switch off and reposition easily.
Where should a magnetic featherboard sit during a rip cut?
Place it ahead of the blade, pressing the uncut stock against the fence, never beside or beyond the blade where it could pinch the cut piece. The board should be close enough to support the stock as it reaches the cutter, with pressure light enough that the piece slides forward without being forced.
Conclusion
Magnetic featherboards trade the miter slot for freedom of placement, and the right pick depends on how your shop works. The Universal Featherboard Pro is the best single board for most cast iron saws and steel router tables, the Pro Table Featherboard brings the strongest classic hold for heavy ripping, and the Vertical Featherboard Pro covers the downward pressure the others cannot. The Starter Kit is the flexible mid-range route into the full system, and the Reversible Featherboard is a sensible budget add-on once that base is in the shop. Confirm your table and fence are ferrous, compare shear ratings rather than headline force, and any of the five will hold stock more consistently than feeding freehand.
Related guides
Read next
- Best Push Blocks for Table Saws, Jointers and Routers
- Best Miter Gauges for Table Saws: 5 Accurate Picks
- Best Router Table Safety Switches for Fast, Safe Stops
- Best Tenon Jigs for Table Saws: 5 Picks for Clean Cheeks
- Best Diamond Sharpening Plates for Chisels and Planes
- Best Router Template Guide Bushings for Clean Cuts
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!