Updated Nov 20, 2026· 11 min read

Key takeaways

  • Compare the best push blocks for table saws, jointers, and router tables, with published specs on grip pads, adjustable legs, heels, and handle design.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is MicroJig GRR-RIPPER+ 3D Pushblock (GR-100+), with MicroJig GRR-RIPPER MAX 3D Pushblock (GR-300MAX) as a strong alternative.

The best push block for most woodworkers is the MicroJig GRR-RIPPER+ (GR-100+), because its three adjustable legs apply downward, inward, and forward force at the same time, and its Green GRR-RIP grip surface holds hardwoods, plywood, plastics, and aluminum without a heel catching on the end of the board. For shops that face joint wide stock all day, the MicroJig GRR-RIPPER MAX (GR-300MAX) adds a fuller accessory kit around the same 3D pushblock body. The original GRR-RIPPER GR-100 remains a proven mid-range option, while the POWERTEC 71009V five-piece set and the POWERTEC 71510 Deluxe set cover a whole shop with simple push blocks and sticks at the budget end.

A push block differs from a push stick in one important way: it sits on top of the workpiece and pushes down as well as forward, which is why it is the safer tool on a jointer, planer, shaper, or router table, where a stick cannot control the face of the board. Every pick below is sold on Amazon, and every specification comes from published listing data. As an Amazon Associate, we earn from qualifying purchases.

Contents
  1. Table of Contents
  2. Quick Picks
  3. MicroJig GRR-RIPPER+ 3D Pushblock (GR-100+)
  4. MicroJig GRR-RIPPER MAX 3D Pushblock (GR-300MAX)
  5. MicroJig GRR-RIPPER GR-100 3D Pushblock
  6. POWERTEC Push Block and Push Stick Set, 5-Pack (71009V)
  7. POWERTEC Deluxe Safety Push Block and Stick Set, 5-Pack (71510)
  8. How to Choose a Push Block
  9. FAQ
  10. Conclusion

Table of Contents

Quick Picks

  • Best overall: MicroJig GRR-RIPPER+ (GR-100+) — three-direction control, SafeRip Kit included, rips stock down to a quarter inch square.
  • Best fully equipped: MicroJig GRR-RIPPER MAX (GR-300MAX) — the flagship pushblock bundled with the complete accessory kit, including the thin-rip leg.
  • Best mid-range classic: MicroJig GRR-RIPPER GR-100 — the original three-leg design with a half-inch leg, quarter-inch leg, and adjustable center leg.
  • Best budget set: POWERTEC 71009V — three push blocks and two push sticks with ergonomic Max Grip handles in safety orange.
  • Best deluxe budget set: POWERTEC 71510 — adds a magnetic push stick, an L-shaped stick, and a dual-handle push block to the basic five-piece format.

MicroJig GRR-RIPPER+ 3D Pushblock (GR-100+)

MicroJig GRR-RIPPER+ 3D Pushblock (GR-100+)

MicroJig GRR-RIPPER+ 3D Pushblock (GR-100+)

Check price on Amazon

The GRR-RIPPER+ is the current version of MicroJig’s three-leg pushblock, and it is the pick to buy if one tool has to cover the table saw, router table, band saw, and jointer. The body carries three legs: two fixed-width outer legs and an adjustable center leg that slides to straddle the blade or cutter, so the block keeps downward pressure on both the keeper piece and the offcut instead of letting the offcut wander into the blade. The included SafeRip Kit is a position guide that helps set the center leg clear of the blade path before the cut starts.

The grip surface is MicroJig’s proprietary Green GRR-RIP material, which the manufacturer rates for hardwoods such as oak, cherry, walnut, and maple, plus plywood, plastics, and aluminum. MicroJig states the block can rip stock down to a quarter inch by a quarter inch, and the listing backs the tool with a three-year warranty. At roughly 7.9 inches long, it is compact enough for short stock yet long enough to keep both hands’ worth of pressure ahead of the cutter.

Specs

  • Brand and model: MicroJig GRR-RIPPER+, model GR-100+
  • UPC: 815267012006
  • Grip surface: Green GRR-RIP proprietary non-slip material
  • Legs: Three legs, including an adjustable center leg
  • Included kit: SafeRip Kit position guide
  • Minimum rip: Quarter inch by quarter inch, per manufacturer
  • Compatibility: Table saws, router tables, band saws, and jointers
  • Power source: Hand powered
  • Warranty: Three-year manufacturer warranty, per listing

MicroJig GRR-RIPPER MAX 3D Pushblock (GR-300MAX)

Check price on Amazon

The GRR-RIPPER MAX takes the same three-direction force system and bundles it with the full accessory kit, which makes it the premium pick for woodworkers who rip thin strips often. The kit includes the eighth-inch leg for thin rips, the SafeRip Kit, and the additional support accessories that ship with the flagship package, so there is nothing else to add before the block can handle narrow stock, wider panels, and resaw-style work on the band saw.

Like the rest of the GRR-RIPPER line, the MAX uses the Green GRR-RIP grip material for traction on hardwoods, composites, and aluminum, and the three legs apply downward, inward, and forward pressure together. That inward pressure is the detail that matters on the table saw: it holds the workpiece against the fence through the whole cut, which reduces the wandering that leads to kickback. The MAX is the largest investment of the five picks, but it is also the most complete push block system in this roundup.

Specs

  • Brand and model: MicroJig GRR-RIPPER MAX, model GR-300MAX
  • UPC: 815267012167
  • Grip surface: Green GRR-RIP material
  • Included accessories: Eighth-inch thin-rip leg, SafeRip Kit, and support accessories
  • Force system: Downward, inward, and forward pressure from three legs
  • Compatibility: Table saws, router tables, band saws, and jointers
  • Date first available on Amazon: October 18, 2024, per listing

MicroJig GRR-RIPPER GR-100 3D Pushblock

MicroJig GRR-RIPPER GR-100 3D Pushblock

MicroJig GRR-RIPPER GR-100 3D Pushblock

Check price on Amazon

The original GR-100 is the pushblock that established the three-leg format, and it remains a sound mid-range buy. It ships with the main body, a half-inch leg, a quarter-inch leg, and the adjustable center leg, which together cover most rip widths a home shop handles. Published specifications put the tool at about 1.8 pounds, light enough for one-handed use on the jointer yet heavy enough to stay planted on wide stock.

The design logic is identical to the newer models: the legs straddle the blade, the grip pads hold the top face of the board, and the handle keeps the user’s hand up and away from the cutter. Replacement legs and accessories are widely available. Choose it over the GRR-RIPPER+ when the SafeRip Kit is not needed and the classic package fits the budget better.

Specs

  • Brand and model: MicroJig GRR-RIPPER, model GR-100 (GRR-RIPPER 100)
  • UPC: 733353322429
  • Weight: About 1.8 pounds, per published specifications
  • Included components: Main body, half-inch leg, quarter-inch leg, and adjustable center leg
  • Grip surface: Green GRR-RIP grip material
  • Compatibility: Table saws, router tables, band saws, and jointers
  • Color: Yellow

POWERTEC Push Block and Push Stick Set, 5-Pack (71009V)

POWERTEC Push Block and Push Stick Set, 5-Pack (71009V)

POWERTEC Push Block and Push Stick Set, 5-Pack (71009V)

Check price on Amazon

The POWERTEC 71009V set takes the opposite approach to MicroJig: instead of one adjustable tool, it provides five simple ones. The box holds three push blocks — one long hold-down block and two short hold-down blocks — plus a straight push stick and a V-shaped Safe V stick for narrow rips. That mix covers the table saw, router table, band saw, and jointer, and having two short blocks allows the hand-over-hand feeding technique that jointing long boards calls for.

Each piece uses an ergonomic handle with POWERTEC’s Max Grip treatment, and the whole set is molded in safety orange for visibility against wood and cast iron. The blocks rely on grip pads and body weight rather than adjustable legs, so they cannot straddle a blade the way the GRR-RIPPER designs can, but for face jointing, edge jointing, and general routing they provide the downward pressure that keeps hands clear of the cutter. As a first safety set for a new shop, it is the budget pick of this roundup.

Specs

  • Brand and model: POWERTEC, model 71009V
  • Pieces: Five — one long hold-down push block, two short hold-down push blocks, one straight push stick, one V-shaped push stick
  • Handles: Ergonomic handles with Max Grip
  • Color: Safety orange
  • Compatibility: Table saws, router tables, band saws, and jointers
  • Date first available on Amazon: February 21, 2022, per listing

POWERTEC Deluxe Safety Push Block and Stick Set, 5-Pack (71510)

POWERTEC Deluxe Safety Push Block and Stick Set, 5-Pack (71510)

POWERTEC Deluxe Safety Push Block and Stick Set, 5-Pack (71510)

Check price on Amazon

The POWERTEC 71510 Deluxe set upgrades the basic five-piece format with better handles and one clever addition. Alongside two deluxe push blocks and a dual-handle push block for wide stock, the set includes a deluxe L-shaped push stick and a magnetic push stick that can be stored against the side of the saw or another steel surface, keeping it within reach instead of buried in a drawer.

The dual-handle block is the piece that justifies the step up: two handles spread downward pressure across wide panels on the jointer or router table, where a single handle can let one edge lift. All five pieces share the Max Grip ergonomic handle design and safety orange color of the standard set. For woodworkers who want a complete, inexpensive safety kit with a few refinements, this is the deluxe budget pick; for blade-straddling control on narrow rips, the MicroJig tools above remain the stronger choice.

Specs

  • Brand and model: POWERTEC, model 71510
  • Pieces: Five — one magnetic deluxe push stick, one L-shaped deluxe push stick, two deluxe push blocks, one dual-handle push block
  • Handles: Ergonomic handles with Max Grip
  • Color: Safety orange
  • Compatibility: Table saws, router tables, band saws, and jointers
  • Style: Shop Safety Kit, five pieces

How to Choose a Push Block

Start with the machine. On a jointer or planer, the cutter works the face of the board, so a flat push block with a grip pad and a rear heel is the right tool; the heel hooks the end of the board and the pad supplies the downward pressure. On a table saw, the defining question is whether the block can straddle the blade. Adjustable multi-leg designs such as the GRR-RIPPER line move their center leg sideways so the block passes over the blade while pressing on both sides of the kerf, which is what makes controlled narrow rips possible.

Next, look at the grip surface. A quality non-slip pad — MicroJig’s Green GRR-RIP material or the textured pads on the POWERTEC blocks — is what transfers downward force into forward feed without the block sliding on dusty stock. Pads wear and collect dust, so a design with replaceable pads or legs extends the tool’s working life.

Consider the handle. A tall, closed handle keeps knuckles above the workpiece and lets the user push with body weight rather than wrist strength. Dual-handle blocks spread pressure on wide panels, while a single centered handle suits narrow stock. Heels deserve a check as well: fixed heels are simple and strong, while adjustable or sacrificial heels can be reset for different stock thicknesses and replaced after blade contact.

Finally, match the tool to the cut. Thin rips need a narrow leg option, and long jointer work goes better with two short blocks used hand over hand. Many shops end up with one adjustable pushblock for the table saw and a basic set of flat blocks for the jointer, which is exactly the split between the premium and budget tiers here.

FAQ

What is the difference between a push block and a push stick?

A push stick is a narrow tool that pushes the end of a board from behind, applying mostly forward force. A push block sits on top of the workpiece and applies downward force as well as forward force, and usually adds a heel that hooks the back edge. That downward pressure is why push blocks are the standard choice on jointers, planers, shapers, and router tables.

Can a push block replace a blade guard or riving knife?

No. A push block is a feeding aid, not a guard. Published safety guidance from saw manufacturers treats push blocks as a complement to the blade guard, riving knife, and anti-kickback pawls, not a substitute for them. Use the guard and riving knife for every cut they fit, and use the push block to keep hands away from the cutter while feeding.

How narrow a rip can a push block handle?

It depends on the leg design. MicroJig publishes a minimum rip of a quarter inch by a quarter inch for the GRR-RIPPER+, and the eighth-inch leg included with the GRR-RIPPER MAX supports even thinner strips. Flat push blocks without adjustable legs should stay on stock wide enough that the block never has to pass over the blade.

When should a push block be replaced?

Replace or repair a push block when the grip pad is worn smooth, glazed with dust and finish, or cut by blade contact, and when a heel is chipped or shortened. Sacrificial legs and heels are designed to be replaced after contact with a blade or bit, which is why designs with replaceable parts cost less to keep in service over time.

Conclusion

For most woodworkers, the MicroJig GRR-RIPPER+ (GR-100+) is the best push block to own first: it controls the workpiece in three directions, includes the SafeRip Kit, and covers the table saw, router table, band saw, and jointer with one tool. The GRR-RIPPER MAX (GR-300MAX) is the premium step up for thin rips and heavy use, and the original GR-100 remains a dependable mid-range classic. On a budget, the POWERTEC 71009V set equips a whole shop at once, and the POWERTEC 71510 Deluxe set adds a magnetic stick and a dual-handle block for wide stock. Whichever tier fits, a push block that is actually within reach of the saw is the one that keeps hands safe.

F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Push Blocks for Table Saws, Jointers and…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.