Our Top Picks
WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness PlanerSpiral, 13-Inch, Single Speed81 poundsCheck on Amazon
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Benchtop Thickness Planers for Small Workshops
- Top Pick: DEWALT DW735X 13-Inch Thickness Planer
- Runner-up: JET JWP-13BTHH 13-Inch Helical Benchtop Planer
- Also consider: WEN PL1326 13-Inch Spiral Benchtop Thickness Planer
A benchtop thickness planer turns rough, uneven lumber into boards of even, repeatable thickness, and in a small workshop it has to do that job without taking up floor space. The five planers in this guide all run on a 15-amp motor and sit on a bench or a stand, but they split along two clear lines: width capacity, at 12, 12-1/2 or 13 inches, and cutterhead style, either full-width straight knives or segmented spiral and helical heads.
As an Amazon Associate, we earn from qualifying purchases.
This guide compares the specifications the makers publish: planing width, stock thickness, depth of cut per pass, cutterhead type, feed rate, dust port and weight. If most of your stock is furniture parts under 12 inches wide, the narrower machines save bench room and lifting. If you glue up wide panels or mill figured hardwood, the 13-inch class and an insert cutterhead earn their keep.
This article contains affiliate links, and we may earn a commission when you buy through them, at no extra cost to you.
Contents
Quick Answer
For most small workshops, the DEWALT DW735X is the benchtop thickness planer to buy first: a full 13 inches of width, a three-knife cutterhead and a two-speed gearbox that lets you trade feed speed for finish quality. Choose the JET JWP-13BTHH instead if you mill figured hardwood often and want a helical carbide-insert head.
DEWALT DW735X 13-Inch Thickness Planer
The DW735X is the 13-inch benchmark in this class. Its three-knife cutterhead is driven by a 15-amp motor at a 10,000 rpm cutterhead speed, and a two-speed gearbox changes the feed rate so the head produces 96 cuts per inch for fast dimensioning or 179 cuts per inch for a finer finishing pass. The X package adds infeed and outfeed tables and an extra set of knives to the base machine.
Capacity matches the class standard: boards up to 13 inches wide and 6 inches thick, with a maximum depth of cut of 1/8 inch per pass. A fan-assisted chip ejection system blows chips clear of the cutterhead, which helps on wide stock where chip volume is highest. At 92 pounds per DEWALT, it is the heaviest machine in this guide, so give it a fixed bench spot or a mobile stand.
Specs:
– Planing width: 13 in
– Maximum stock thickness: 6 in
– Maximum depth of cut: 1/8 in per pass
– Cutterhead: three straight knives; two-speed feed, 96 or 179 cuts per inch
– Motor: 15 amp; cutterhead speed 10,000 rpm
– Dust port: fan-assisted chip ejection; port size not stated
– Weight: 92 lb
See it on Amazon: https://www.amazon.com/dp/B003OX9KME?tag=powertoolsdiy04-20
JET JWP-13BTHH 13-Inch Helical Benchtop Planer
The JWP-13BTHH is JET’s answer for figured wood: a true helical cutterhead carrying 30 four-sided carbide inserts. Each insert shears the wood at an angle, and when one edge dulls you rotate that insert 90 degrees to a fresh edge instead of changing a full knife set; JET includes five spare inserts in the box. JET rates the machine at 91 dB, quieter than its own straight-knife version.
The 2 HP, 15-amp motor turns the head at 9,500 rpm with a single feed rate of 24.6 feet per minute. Capacity matches the DEWALT at 13 inches wide and 6 inches thick, taking up to 1/8 inch per pass on boards 6 inches wide or less and 1/16 inch across the full width. JET states the planer is for solid wood only, not plywood, painted or reclaimed lumber or end grain, and boards must be at least 14 inches long. At 66 pounds it is far easier to move than the DW735X, and the dust hood accepts both 2-1/2-inch and 4-inch hoses.
Specs:
– Planing width: 13 in
– Maximum stock thickness: 6 in
– Maximum depth of cut: 1/8 in per pass on narrow stock; 1/16 in at full width
– Cutterhead: helical, 30 four-sided carbide inserts; 5 spares included
– Motor: 2 HP, 15 amp, 120V; cutterhead speed 9,500 rpm; feed 24.6 fpm
– Dust port: 2-1/2 in and 4 in
– Weight: 66 lb
See it on Amazon: https://www.amazon.com/dp/B0HJ4ZVRGT?tag=powertoolsdiy04-20
WEN PL1326 13-Inch Spiral Benchtop Thickness Planer
The PL1326 puts a spiral cutterhead in the most accessible 13-inch frame in this guide. WEN fits 26 two-sided high-speed steel blades in a staggered spiral pattern, so the head takes many small cuts instead of three full-width knife strikes. When an edge dulls, you rotate or flip the individual blade rather than resetting a full knife.
Capacity is 13 inches wide and 6 inches thick, with a maximum depth of cut of 3/32 inch per pass, the shallowest limit here. The 15-amp motor spins the head at 10,000 rpm and feeds stock at 26 feet per minute at a single speed, so there is no slower finishing gear like the DEWALT offers. At 81 pounds it sits between the JET and the DW735X for portability. WEN does not state a dust port size for this model, so confirm your hose fit before counting on a collector connection.
Specs:
– Planing width: 13 in
– Maximum stock thickness: 6 in
– Maximum depth of cut: 3/32 in per pass
– Cutterhead: spiral, 26 two-sided HSS blades
– Motor: 15 amp; cutterhead speed 10,000 rpm; feed 26 fpm, single speed
– Dust port: not stated
– Weight: 81 lb
See it on Amazon: https://www.amazon.com/dp/B08NWF6P3Q?tag=powertoolsdiy04-20
DEWALT DW734 12-1/2-Inch Benchtop Planer
The DW734 is DEWALT’s 12-1/2-inch machine, built around the same three-knife layout as its bigger sibling but in a simpler single-speed package. Its three reversible, disposable knives produce 96 cuts per inch, and DEWALT states they last longer than its earlier disposable sets. A four-column carriage lock limits cutterhead movement during a pass, which is the feature that guards against snipe on this class of planer.
It planes stock up to 12-1/2 inches wide and 6 inches thick, with a maximum cut of 1/8 inch per pass, fed by the same 15-amp motor rating as the DW735X. What you give up is the two-speed gearbox and half an inch of width, and at 80 pounds it is still a two-handed lift. DEWALT lists the dust hood as a separate accessory, so allow for it if you plan to connect a collector.
Specs:
– Planing width: 12-1/2 in
– Maximum stock thickness: 6 in
– Maximum depth of cut: 1/8 in per pass
– Cutterhead: three straight knives, reversible and disposable; 96 cuts per inch
– Motor: 15 amp; cutterhead speed 10,000 rpm
– Dust port: not stated; dust hood sold separately
– Weight: 80 lb
See it on Amazon: https://www.amazon.com/dp/B0000CCXU6?tag=powertoolsdiy04-20
Makita 2012NB 12-Inch Portable Planer
The 2012NB is the lightweight of this group at 61.9 pounds, and the only 12-inch machine here. Makita’s Interna-Lok automated head clamp is its signature feature: the clamp engages on its own to limit cutterhead movement and makes the two double-edged disposable knives quick to change with the included magnetic holder.
The 15-amp motor turns the cutterhead at 8,500 rpm and feeds stock at 28 feet per minute, the fastest feed rate in this guide. Capacity is 12 inches wide and 6-3/32 inches thick, with up to 1/8 inch of cut per pass. Makita rates noise at 83 dB, the lowest figure in this group, which matters in a basement shop or an attached garage. The dust hood is an optional accessory on this model, so the listing does not state a port size.
Specs:
– Planing width: 12 in
– Maximum stock thickness: 6-3/32 in
– Maximum depth of cut: 1/8 in per pass
– Cutterhead: two straight knives, double-edged and disposable
– Motor: 15 amp; cutterhead speed 8,500 rpm; feed 28 fpm
– Dust port: not stated; dust hood sold separately
– Weight: 61.9 lb
See it on Amazon: https://www.amazon.com/dp/B000051ZOO?tag=powertoolsdiy04-20
How to Choose
Start with width. Measure the widest boards and glue-ups you run: a 13-inch planer swallows full-width panels that a 12-inch machine cannot take, while the 12 and 12-1/2-inch models cover most furniture parts and save weight and bench space. Next, pick a cutterhead. Straight knives are simple, but a nicked knife leaves a raised line on every board until it is changed. Segmented spiral and helical heads let you rotate a single insert, run quieter, and shear figured grain more gently, at a higher cost for the head itself.
Every machine here accepts stock about 6 inches thick, but per-pass limits run from 3/32 to 1/8 inch, and light passes are the honest working method regardless. Dust handling deserves a real decision, because planers produce more chips than almost any other bench tool: match the port to your collector hose, and note which models sell the hood separately. Finally, weigh the machine and your circuit: these planers run from about 62 to 92 pounds and all draw 15 amps, so a circuit shared with a running dust collector can trip; the JET listing calls for a 20-amp circuit. Remember that a planer makes two faces parallel, not flat: joint one face first, or use a planer sled, before thicknessing.
Who Should Skip
Skip this whole class if your stock routinely runs wider than 13 inches or thicker than 6 inches; that work belongs to a stationary 15-inch or larger planer. Skip it if you run boards all day in a production setting, because benchtop universal motors are built for intermittent shop use, not continuous duty. Also skip if you cannot manage chips or spare capacity on a 15-amp circuit; every machine here needs both. And if you buy only pre-surfaced lumber and rarely need an exact thickness, a planer will mostly sit on the bench; put the money into blades and abrasives instead.
FAQ
Can a benchtop planer flatten a twisted or cupped board?
No. A thickness planer references the face resting on its bed, so it makes the top face parallel to the bottom one without making either flat. Flatten one face on a jointer first, or run the board on a planer sled with shims, then flip and thickness normally.
Should I choose straight knives or a helical cutterhead?
Choose straight knives for straightforward stock, lower head cost and fast knife swaps as a set. Choose a helical or spiral head if you mill figured or interlocked grain, want to rotate one insert instead of changing a full knife set, or want the quietest cut in this class.
What board sizes can these planers actually handle?
Widths run from 12 to 13 inches and thickness capacity is about 6 inches on every model here. Minimum board length matters too: the JET, for example, requires boards at least 14 inches long so the feed rollers keep hold of the stock.
Do I really need dust collection with a benchtop planer?
Yes. A planer ejects a high volume of chips, and without extraction they pack around the cutterhead and rollers and mark the work. At minimum, match a shop vacuum or collector hose to the port size the maker states, and wear eye and hearing protection either way.
Final Verdict
For most small workshops the DEWALT DW735X remains the default: full 13-inch capacity, a proven three-knife head and a two-speed gearbox for finishing passes. The JET JWP-13BTHH is the better buy for figured hardwood, with a true helical carbide-insert head in a lighter 66-pound body. The WEN PL1326 is the spiral-head value pick, the DW734 is the simpler DEWALT for 12-1/2-inch work, and the Makita 2012NB suits anyone who puts low weight and low noise first.
Related guides
Read next
- Best Dust Collectors for Small Woodworking Workshops
- Best Planer Stands and Rolling Bases for Small Shops
- Best Planer Blades for Benchtop and 15-Inch Planers
- Best Track Saws for Small Workshops: 5 Compact Picks
- Best Tool Belts for Carpenters and Serious DIY Woodwork
- Best Cordless Brad Nailers for Trim and Cabinet Work
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!