Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare five benchtop band saws for home workshops by resaw height, throat capacity, motor, blade range, table tilt, dust port and included fence.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is RIKON Power Tools 10-3061 10-Inch Deluxe Bandsaw, with RIKON 10-305 Bandsaw with Fence, 10-Inch as a strong alternative.

A benchtop band saw earns its place in a home workshop by doing the jobs other saws handle badly: cutting curves and circles, slicing thin veneer from a board, trimming tenons, and breaking down small stock without kickback risk. Because the blade runs in one continuous downward loop, the work stays pressed to the table and the cuts feel controlled. The trade-off is size: 9- and 10-inch models give up the throat depth and resaw height of a 14-inch floor saw for a footprint a small shop can absorb.

As an Amazon Associate, we earn from qualifying purchases.

This guide compares five benchtop band saws using the specifications each maker publishes: throat capacity, maximum cut height, motor size, blade length and width range, blade speed, table size and tilt, dust port size, and whether a fence and miter gauge come in the box. Two of the five are 10-inch saws with meaningful resaw capacity; three are compact machines aimed at curves, craft work, and light furniture parts.

This article contains affiliate links, and the site may earn a commission on purchases made through them.

Contents
  1. Quick Answer
  2. RIKON Power Tools 10-3061 10-Inch Deluxe Bandsaw
  3. WEN 10-Inch Two-Speed Band Saw with Stand (BA3962)
  4. RIKON 10-305 Bandsaw with Fence, 10-Inch
  5. WEN 9-Inch Band Saw, 2.8-Amp Benchtop (BA3959)
  6. SKIL 3386-01 120-Volt 9-Inch Band Saw with Light
  7. How to Choose
  8. Who Should Skip
  9. FAQ
  10. Final Verdict

Quick Answer

The RIKON 10-3061 is the strongest all-around benchtop band saw here: RIKON rates it for a 5-inch cut height and 9-5/8-inch cut width, with a 1/2 HP two-speed motor and a cast iron table. For the deepest cut plus an included stand, choose the WEN BA3962 at 6 inches. On a budget, the WEN BA3959 covers basic curve work.

RIKON Power Tools 10-3061 10-Inch Deluxe Bandsaw

RIKON Power Tools 10-3061 10-Inch Deluxe Bandsaw

RIKON Power Tools 10-3061 10-Inch Deluxe Bandsaw

Check price on Amazon

The 10-3061 is RIKON’s deluxe 10-inch benchtop model. RIKON rates the cutting height at 5 inches, the most resaw capacity in the 10-inch benchtop class, and the cutting width at 9-5/8 inches. A 1/2 HP, 5.5-amp motor drives the blade at two speeds, 1,515 and 3,280 feet per minute, so you can slow down for dense hardwood or speed up for softwood.

The saw takes 70-1/2-inch blades from 1/8 to 1/2 inch wide, and a rip fence is included. No miter gauge is included, and the 5/8-inch miter slot limits aftermarket gauge choices.

Specs:
– Throat (max cut width): 9-5/8 in
– Max cut height: 5 in
– Motor: 1/2 HP (5.5 amp)
– Blade speeds: 1,515 / 3,280 FPM
– Blade length: 70-1/2 in
– Blade widths: 1/8 to 1/2 in
– Table: 13-3/4 x 12-1/2 in cast iron, tilts 5° left to 45° right
– Dust port: 2-1/2 in
– Fence: included
– Miter gauge: not included
– Weight: not stated

View on Amazon: https://www.amazon.com/dp/B07WRLZPGV?tag=powertoolsdiy04-20

WEN 10-Inch Two-Speed Band Saw with Stand (BA3962)

The WEN BA3962 is the depth champion of this group. WEN rates its 3.5-amp motor for cuts up to 6 inches deep and 9-3/4 inches wide, the tallest resaw rating here. It is a two-speed machine, running at 1,520 or 2,620 feet per minute, and it ships with a stand and a work light.

The saw uses 72-inch blades from 1/8 to 1/2 inch wide, and a 3/8-inch, 6 TPI blade is included along with a fence and a miter gauge. At 73 pounds on its stand, it is the heaviest setup here, which helps stability but argues for a fixed spot in the shop.

Specs:
– Throat (max cut width): 9-3/4 in
– Max cut height: 6 in
– Motor: 3.5 amp
– Blade speeds: 1,520 / 2,620 FPM
– Blade length: 72 in
– Blade widths: 1/8 to 1/2 in
– Table: 14-1/8 x 12-1/2 in cast aluminum, tilts to 45°
– Dust port: 3-in-1
– Fence, miter gauge, stand, work light: included
– Weight: 73 lb

View on Amazon: https://www.amazon.com/dp/B016VD8GAA?tag=powertoolsdiy04-20

RIKON 10-305 Bandsaw with Fence, 10-Inch

RIKON 10-305 Bandsaw with Fence, 10-Inch

RIKON 10-305 Bandsaw with Fence, 10-Inch

Check price on Amazon

The 10-305 is RIKON’s simpler 10-inch benchtop saw, built around a solid steel frame and a cast iron table. Its 1/3 HP motor runs the blade at a single speed of 2,780 feet per minute. RIKON rates the maximum cutting height at 4-5/8 inches and the cutting width at 9-5/8 inches, trading a little resaw height against the 10-3061 for fewer settings to manage.

Blade length is 70-1/2 inches, with widths from 1/8 to 1/2 inch, the same blade size as the 10-3061. A rip fence is included; a miter gauge is not. RIKON backs the saw with a 5-year warranty, the longest coverage in this roundup.

Specs:
– Throat (max cut width): 9-5/8 in
– Max cut height: 4-5/8 in
– Motor: 1/3 HP
– Blade speed: 2,780 FPM
– Blade length: 70-1/2 in
– Blade widths: 1/8 to 1/2 in
– Table: 13-3/4 x 12-1/2 in cast iron, tilts 0° to 45° right
– Dust port: 2-1/2 in
– Fence: included
– Miter gauge: not included
– Weight: 68 lb

View on Amazon: https://www.amazon.com/dp/B0032YZB2S?tag=powertoolsdiy04-20

WEN 9-Inch Band Saw, 2.8-Amp Benchtop (BA3959)

WEN 9-Inch Band Saw, 2.8-Amp Benchtop (BA3959)

WEN 9-Inch Band Saw, 2.8-Amp Benchtop (BA3959)

Check price on Amazon

The BA3959 is WEN’s compact 9-inch benchtop model and the natural starting point for a first band saw. Its 2.8-amp motor rotates the blade at up to 2,500 feet per minute, and WEN rates it for cuts up to 3-1/2 inches deep and 9 inches wide. That covers curves, small box parts, toys, and template work.

It uses 59-1/2-inch blades from 1/8 to 3/8 inch wide, and the box includes a 1/4-inch blade, a rip fence, a miter gauge, and a blade guard with ball-bearing supports. Its 2-1/2-inch dust port is full-size, unlike the small ports on some compact saws. At 40 pounds it is easy to store on a shelf between uses, and WEN includes a 2-year warranty.

Specs:
– Throat (max cut width): 9 in
– Max cut height: 3-1/2 in
– Motor: 2.8 amp
– Blade speed: up to 2,500 FPM
– Blade length: 59-1/2 in
– Blade widths: 1/8 to 3/8 in
– Table: 12-1/4 x 11-7/8 in, tilts to 45°
– Dust port: 2-1/2 in
– Fence: included
– Miter gauge: included
– Weight: 40 lb

View on Amazon: https://www.amazon.com/dp/B0BK2V91VW?tag=powertoolsdiy04-20

SKIL 3386-01 120-Volt 9-Inch Band Saw with Light

SKIL 3386-01 120-Volt 9-Inch Band Saw with Light

SKIL 3386-01 120-Volt 9-Inch Band Saw with Light

Check price on Amazon

The SKIL 3386-01 is the lightest saw in this roundup at just under 31 pounds, which makes it the easiest to move between a bench and storage. Its 2.5-amp motor runs at a single no-load speed of 2,800 feet per minute, with a 9-inch throat and a maximum cutting capacity of 3-1/2 inches.

SKIL fits a cast iron table with a rack and pinion adjustment, so angle changes are made by cranking rather than loosening and nudging. The saw takes blades 1/8 to 3/8 inch wide and 59-1/4 to 59-1/2 inches long, and a 6 TPI blade, rip fence, and miter gauge are included. An articulating LED work light aims at the cut line, and the 1-1/2-inch dust port needs a reducer for most shop vacuums.

Specs:
– Throat (max cut width): 9 in
– Max cut height: 3-1/2 in
– Motor: 2.5 amp
– Blade speed: 2,800 FPM
– Blade length: 59-1/4 to 59-1/2 in
– Blade widths: 1/8 to 3/8 in
– Table: 12 x 11-3/4 in cast iron, tilts 0° to 45°, rack and pinion adjustment
– Dust port: 1-1/2 in
– Fence: included
– Miter gauge: included
– Weight: 30.86 lb

View on Amazon: https://www.amazon.com/dp/B009VJ3NNW?tag=powertoolsdiy04-20

How to Choose

Start with the two capacity numbers, because they cannot be upgraded later. Throat capacity limits how wide a board you can swing through a curve; every saw here is between 9 and 9-3/4 inches. Cut height sets your resaw limit: 3-1/2 inches on the 9-inch saws, 4-5/8 to 5 inches on the RIKON 10-inch models, and 6 inches on the WEN BA3962. If resawing box lids, panels, or veneer is on your project list, buy for cut height first.

Motor size and blade speed come next. The 2.5- to 2.8-amp motors in the 9-inch saws suit thin stock and curves but need a slow feed in thick hardwood. The 1/2 HP RIKON 10-3061 and two-speed WEN BA3962 give more headroom. Wider blades up to 1/2 inch, which only the 10-inch saws accept, track straighter for resawing, while narrow 1/8-inch blades, accepted by all five, turn the tightest curves.

Finally, check the table and extras. Cast iron tables, on both RIKON saws and the SKIL, add weight that damps vibration, while the WEN BA3962’s larger aluminum table gives more support for wide stock. A 2-1/2-inch dust port connects directly to a shop vacuum; the SKIL’s smaller port needs an adapter. Both RIKON saws include a fence but no miter gauge, while both WEN saws and the SKIL include both.

Who Should Skip

Skip the whole benchtop class if your work regularly involves resawing boards taller than 6 inches, cutting wide panels, or production runs of thick hardwood. Those jobs belong on a 14-inch floor-standing band saw. Metalworkers should also look elsewhere: these wood-cutting saws run their blades in the thousands of feet per minute, far above metal-cutting speeds.

Skip the 9-inch WEN BA3959 and SKIL 3386-01 if resawing is a main reason for buying; their 3-1/2-inch cut height and smaller motors leave little margin. Skip the RIKON saws if a miter gauge is essential on day one, because you will be buying one separately. And skip the WEN BA3962 if your bench space is temporary, since its stand and 73-pound weight make it a fixture rather than a stow-away tool.

FAQ

What is the difference between throat capacity and resaw capacity?

Throat capacity is horizontal: the distance from the blade to the frame, which limits the width of stock you can maneuver through a cut. Resaw capacity is vertical: the maximum height of stock that fits under the blade guide, which limits how tall a board you can slice into thinner pieces. A saw can have a generous throat and still resaw very little, as the 9-inch models show.

Can a benchtop band saw resaw boards for box making and veneer?

Yes, within its rated cut height. The WEN BA3962 handles stock up to 6 inches tall and the RIKON 10-3061 up to 5 inches, covering most box sides and small panels. Fit the widest blade the saw accepts, use a low tooth count, and feed slowly so the blade does not wander.

Which blade width should I use for curves, and which for straight cuts?

Narrow blades turn tighter corners: a 1/8-inch blade suits small scroll-style curves, and a 1/4-inch blade is the general-purpose choice. For resawing and long straight cuts, a wider blade tracks straighter, so use the widest your saw accepts: 3/8 inch on the 9-inch saws and 1/2 inch on the 10-inch saws here.

Do these band saws need a stand, or can they sit on a workbench?

Four of the five sit directly on a workbench; their weights run from about 31 to 68 pounds. The WEN BA3962 includes a stand and is the better choice if you have floor space for a dedicated station. Either way, clamp or bolt the saw down before use, because a saw that shifts mid-cut will not track straight.

Final Verdict

For most home workshops, the RIKON 10-3061 is the benchtop band saw to buy first, with 5 inches of resaw height, a 9-5/8-inch throat, two speeds, and a cast iron table. The WEN BA3962 is the pick when maximum cut depth and an included stand matter most, and the RIKON 10-305 suits buyers who prefer a simpler single-speed machine. For small benches and light work, the WEN BA3959 and SKIL 3386-01 cover curves and craft cuts at the lowest weight in this group.

F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Benchtop Band Saws for Home Woodworking ShopsCheck price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.