Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare the best cordless brad nailers for trim and cabinet work, covering 18 gauge nail ranges, magazine capacity, firing modes and battery kit contents.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1), with Milwaukee M18 FUEL 18 Gauge Brad Nailer (2746-20) as a strong alternative.

An 18 gauge brad nailer is the tool that pins casing, crown, shoe molding and cabinet trim in place while glue dries, and the cordless versions do that work without a compressor, a hose or gas cartridges. Every model in this guide drives 18 gauge brads only. There are no 15 or 16 gauge finish nailers here, no 23 gauge pin nailers and no staplers, because those tools answer different questions than trim and cabinet work.

As an Amazon Associate, we earn from qualifying purchases.

The five picks below come from the battery platforms most woodworkers already own: DEWALT 20V MAX, Milwaukee M18, Metabo HPT 18V MultiVolt, Ryobi 18V ONE+ and CRAFTSMAN V20. They split into ready-to-work kits with a battery and charger in the box, and bare tools that only make sense if you own the matching batteries.

This article contains affiliate links, and we may earn a commission when you buy through them at no extra cost to you.

Contents
  1. Quick Answer
  2. DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)
  3. Milwaukee M18 FUEL 18 Gauge Brad Nailer (2746-20)
  4. Metabo HPT 18V MultiVolt Brushless Brad Nailer Kit (NT1850DFT)
  5. Ryobi 18V ONE+ AirStrike 18GA Brad Nailer (P321)
  6. CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)
  7. How to Choose
  8. Who Should Skip
  9. FAQ
  10. Final Verdict

Quick Answer

The DEWALT DCN680D1 kit is the top pick for most trim and cabinet work: it drives the longest brads in this group, from 5/8 in. to 2-1/8 in., holds 110 nails, and arrives with a battery and charger included. M18 owners should take the Milwaukee 2746-20 instead, and the Metabo HPT NT1850DFT is the lightest complete kit here.

DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)

DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)

DEWALT 20V MAX Cordless Brad Nailer Kit, 18GA (DCN680D1)

Check price on Amazon

The DCN680D1 is the kit version of DEWALT’s long-running 18 gauge cordless brad nailer, and it is the only pick here that drives brads up to 2-1/8 in. long. That extra length matters for thicker casing and stacked trim pieces, where a 2 in. ceiling can leave you short. The brushless motor runs purely on battery power, so there is no gas and no hose dragging across finished floors.

Because this is the D1 kit, a 2.0Ah 20V MAX battery and charger are in the box, making it the simplest starting point for anyone without DEWALT batteries. A selectable trigger switches between sequential firing for precise placement and contact actuation for faster runs along baseboard, and depth adjustment and jam release are both tool-free.

Specs:
– Gauge: 18 GA brad nails
– Nail length range: 5/8 in. to 2-1/8 in.
– Magazine capacity: 110 nails
– Firing modes: Sequential and contact actuation, selectable
– Motor: Brushless
– Battery platform: DEWALT 20V MAX, kit with one 2.0Ah battery, charger and kit bag included
– Weight: 5.3 lb, tool only
– Extras: Tool-free depth adjustment, tool-free jam release, micro nose, LED work lights

See the DEWALT DCN680D1 on Amazon

Milwaukee M18 FUEL 18 Gauge Brad Nailer (2746-20)

Milwaukee M18 FUEL 18 Gauge Brad Nailer (2746-20)

Milwaukee M18 FUEL 18 Gauge Brad Nailer (2746-20)

Check price on Amazon

Milwaukee’s 2746-20 is the tool-only entry for the M18 platform, and its party trick is the sealed nitrogen air spring drive. There is no ramp-up time: you press the contact tip, pull the trigger and the brad fires immediately, which makes the tool feel closer to a pneumatic nailer than most battery models. The POWERSTATE brushless motor and air spring are built to sink brads consistently in soft pine and harder trim stock alike.

The nail range matches the DEWALT at 5/8 in. to 2-1/8 in., the magazine holds the same 110 brads, and a tool-free selector moves between sequential and contact actuation. What you do not get is a battery or charger, so this pick is aimed at users who already run M18 tools and have charged packs on the shelf.

Specs:
– Gauge: 18 GA brad nails
– Nail length range: 5/8 in. to 2-1/8 in.
– Magazine capacity: 110 nails
– Firing modes: Sequential and contact actuation, selectable
– Drive system: Nitrogen air spring with POWERSTATE brushless motor
– Battery platform: Milwaukee M18, tool only, battery and charger not included
– Weight: 5.3 lb, tool only
– Extras: Tool-free depth adjustment, dry-fire lockout

See the Milwaukee 2746-20 on Amazon

Metabo HPT 18V MultiVolt Brushless Brad Nailer Kit (NT1850DFT)

The NT1850DFT is the compact option in this group, a brushless kit that is smaller and lighter than the model it replaces. At 4.4 lb it is the lightest nailer here, which adds up over a day of overhead crown work. Its air spring drive fires up to two nails per second with no ramp-up time, and the selective actuation switch flips between sequential and bump fire modes.

This is a complete kit: one 2.0Ah MultiVolt battery with a fuel gauge, a rapid charger and a carrying case are included, and Metabo HPT rates the setup at up to 1,300 nails per charge on that battery. The trade-off for the smaller body is reach, since the nail range tops out at 2 in. rather than 2-1/8 in., and the magazine holds 100 brads instead of 110.

Specs:
– Gauge: 18 GA brad nails
– Nail length range: 5/8 in. to 2 in.
– Magazine capacity: 100 nails
– Firing modes: Sequential and bump fire, selective actuation switch
– Drive system: Air spring drive with brushless motor, up to 2 nails per second
– Battery platform: Metabo HPT 18V MultiVolt, kit with one 2.0Ah battery, rapid charger and case included
– Runtime: Up to 1,300 nails per charge, manufacturer figure
– Weight: 4.4 lb
– Extras: Tool-free depth adjustment, battery fuel gauge

See the Metabo HPT NT1850DFT on Amazon

Ryobi 18V ONE+ AirStrike 18GA Brad Nailer (P321)

Ryobi 18V ONE+ AirStrike 18GA Brad Nailer (P321)

Ryobi 18V ONE+ AirStrike 18GA Brad Nailer (P321)

Check price on Amazon

The P321 brings Ryobi’s AirStrike design to the ONE+ platform: an internal mechanism compresses air on each cycle, so the tool needs no compressor, hose or gas cartridge. It is sold as a bare tool, aimed at the installed base of ONE+ owners who have 18V batteries and a charger at home. Starting from zero means adding both before the first nail is driven.

Fastener range runs from 5/8 in. to 2 in., the magazine holds 105 brads, and a mode selector offers single sequential actuation for careful placement or contact actuation for speed. Tool-free depth-of-drive adjustment and a tool-free jam release cover the two adjustments trim carpenters reach for most, and a dry-fire lockout stops the tool cycling once the magazine runs empty.

Specs:
– Gauge: 18 GA brad nails
– Nail length range: 5/8 in. to 2 in.
– Magazine capacity: 105 nails
– Firing modes: Single sequential and contact actuation, selectable
– Drive system: AirStrike internal air compression
– Battery platform: Ryobi 18V ONE+, tool only, battery and charger not included
– Weight: 5.2 lb, as listed
– Extras: Tool-free depth adjustment, tool-free jam release, dry-fire lockout, LED work light

See the Ryobi P321 on Amazon

CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)

CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)

CRAFTSMAN V20 Cordless Brad Nailer Kit, 18GA (CMCN618C1)

Check price on Amazon

The CMCN618C1 is the kit version of CRAFTSMAN’s V20 brad nailer, sold with a battery and charger included, so it is ready to work the day it arrives. Its motor is rated by CRAFTSMAN at up to 420 nails per charge with the kit battery, a figure aimed at room-by-room trim jobs rather than whole-house production work.

The fastener range is 5/8 in. to 2 in., the magazine holds 100 brads, and firing is sequential, which suits deliberate trim placement. Tool-free jam and stall release settings clear the occasional bent brad without a wrench, and depth adjusts without tools as well. At 6.8 lb it is the heaviest tool in this guide, a real consideration for long overhead sessions.

Specs:
– Gauge: 18 GA brad nails
– Nail length range: 5/8 in. to 2 in.
– Magazine capacity: 100 nails
– Firing modes: Sequential
– Battery platform: CRAFTSMAN V20, kit with battery and charger included
– Runtime: Up to 420 nails per charge, manufacturer figure
– Weight: 6.8 lb
– Extras: Tool-free depth adjustment, tool-free jam and stall release, over-molded handle

See the CRAFTSMAN CMCN618C1 on Amazon

How to Choose

Start with the battery platform, because it decides your real cost and convenience. If you already own DEWALT 20V MAX, Milwaukee M18, Ryobi ONE+ or CRAFTSMAN V20 batteries, the matching nailer is almost always the right answer, and a bare tool like the Milwaukee 2746-20 or Ryobi P321 keeps the purchase simple. If you own nothing yet, buy a kit: the DEWALT DCN680D1 and Metabo HPT NT1850DFT both include a battery and charger.

Next, check nail length against your trim. Most casing, baseboard and cabinet work lives between 1-1/4 in. and 2 in. brads, so the 2 in. ceiling on the Metabo, Ryobi and CRAFTSMAN models covers it. If you regularly pin thick built-up moldings, the 2-1/8 in. capacity of the DEWALT and Milwaukee earns its place. Magazine capacity matters less: 100 to 110 brads per load is typical across this group.

Firing modes and weight finish the decision. Sequential firing places one brad exactly where you press the nose, which suits visible finish work, while contact or bump actuation speeds up repetitive runs; four of the five picks offer both, with the CRAFTSMAN sequential only. Finally, weigh the tool honestly: the 4.4 lb Metabo is noticeably kinder on overhead crown work than the 6.8 lb CRAFTSMAN.

Who Should Skip

Skip this entire category if your fastening is structural. Brad nails are thin holding pins, not framing fasteners, and none of these tools replaces a framing nailer, screws or proper joinery for load-bearing work. If your trim needs the holding power and larger heads of 15 or 16 gauge finish nails, you want a finish nailer instead, not a bigger brad.

Production crews who run a compressor all day may also find pneumatic brad nailers lighter at the nose. And if you are invested in none of these battery platforms and only hang the occasional picture-frame molding, a hammer and a nail set can cover the job without buying into a battery system.

FAQ

Do brad nails hold trim on their own?

Brads are mainly clamps with a handle: they pin trim tightly while wood glue cures, and the glue provides most of the long-term holding strength. For casing and molding that will not be pulled or pried, brads plus glue are the standard approach.

Can these nailers drive brads into hardwood trim?

Yes, within reason. All five are rated by their makers for hardwood trim work, and the brushless DEWALT, Milwaukee and Metabo models are the strongest choices for dense stock. Staying within each tool’s stated brad length range and using the depth adjustment to fine-tune the drive helps avoid brads that stop short in oak or maple.

Is a tool-only nailer a good deal if I do not own that brand’s batteries?

Usually not. A bare tool like the Milwaukee 2746-20 or Ryobi P321 only saves money when compatible batteries and a charger are already on your shelf. Buying both separately typically costs more than a kit such as the DCN680D1 or CMCN618C1 that bundles them.

What brad length should I buy first?

A box of 1-1/4 in. brads covers the widest range of casing, baseboard and cabinet trim, and 2 in. brads handle thicker stock and built-up moldings. Short 5/8 in. to 1 in. brads suit thin decorative molding where a longer pin would blow through the back of the piece.

Final Verdict

The DEWALT DCN680D1 kit is the most complete package here: the longest brad range, a 110-nail magazine, both firing modes and a battery in the box. Milwaukee M18 owners lose nothing by choosing the 2746-20 instead, and the Metabo HPT NT1850DFT is the pick when low weight matters most. The Ryobi P321 serves ONE+ households well as a bare tool, and the CRAFTSMAN CMCN618C1 gives V20 users a ready-to-run kit, with its extra weight the main compromise.

F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Cordless Brad Nailers for Trim and Cabinet…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.