Updated Nov 19, 2026· 9 min read

Key takeaways

  • The best countersink bit sets compared: tapered pilot combos, adjustable depth-stop cutters and plug cutter kits, with sizes, shank styles and materials.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

A screw driven into an unprepared hole does two kinds of damage: it can split the board along the grain, and its head either sits proud or tears the fibers around the entry as it pulls down. A countersink bit set solves both problems in a single pass, drilling a pilot hole and cutting the conical seat for the screw head at the same time, so the head lands flush without chewing up the surface.

As an Amazon Associate, we earn from qualifying purchases.

Countersink bit sets come in two distinct families. The first pairs a tapered drill bit with a countersink cutter on the same shank, sized by screw gauge, so the pilot hole widens toward the top just as a traditional wood screw does. The second uses adjustable countersink heads fitted over straight pilot bits. This guide compares five sets across both families by piece count, sizes, stated materials, shank style and extras like depth stops and plug cutters.

This article contains affiliate links, and we may earn a commission when you buy through them at no additional cost to you.

Contents
  1. Quick Answer
  2. FTG USA Countersink Drill Bit Set, 5 Pc
  3. DEWALT Countersink Drill Bit Set, 3-Piece (DW2535)
  4. EZARC Countersink Drill Bit Set, 15 PCS with Wood Plug Cutters
  5. BOSCH SP515 5 Piece Hex Shank Countersink Drill Bit Set
  6. Amana Tool AMS-621 Carbide Tipped Countersink Set, 3-Pc
  7. How to Choose
  8. Who Should Skip
  9. FAQ
  10. Final Verdict

Quick Answer

The FTG USA Countersink Drill Bit Set is the top pick for most woodworkers: five tapered drill and countersink combinations cover screw gauges #4 through #12, the bits are HSS M2 steel on quick-change hex shanks, and the wide flutes clear chips quickly for clean seats. For hidden fasteners, the EZARC 15-piece set adds plug cutters.

FTG USA Countersink Drill Bit Set, 5 Pc

Check price on Amazon

FTG USA builds this set around the classic tapered combination design: each bit drills a tapered pilot hole and cuts the countersink in one step, with the cutter secured to the drill bit by a pin rather than a friction collar. The five bits are sized by screw gauge, covering #4, #6, #8, #10 and #12 screws, from small hardware and hinges up to heavy furniture frame screws. Because the pilot follows the taper of a traditional wood screw, the threads engage along their full length instead of biting only at the tip.

The maker states the bits are HSS M2 grade 6542 steel, third-party tested by a US accredited lab, with a wider flute shape intended to move chips out faster. Each bit rides on a 1/4 inch hex shank for quick-change chucks, and an Allen wrench is included. The set also counterbores to accept 3/8 inch plugs, per the maker, although plug cutters are not included.

Specs:
– Set style: Tapered drill bit and countersink combination, sized by screw gauge
– Pieces: 5 countersink drill bits, plus an Allen wrench
– Sizes: #4 (7/64 in), #6 (9/64 in), #8 (11/64 in), #10 (3/16 in), #12 (7/32 in)
– Material: HSS M2 grade 6542, per maker
– Shank: 1/4 in hex, quick change
– Depth stop: Not included
– Plug cutters: Not included

View the FTG USA set on Amazon

DEWALT Countersink Drill Bit Set, 3-Piece (DW2535)

Check price on Amazon

The DEWALT DW2535 is the long-running benchmark in this category, a compact three-piece set of tapered combination bits sized for #6, #8 and #10 screws, the gauges behind most cabinet, furniture and joinery screws. Each bit drills, countersinks and counterbores in one step, and the maker pairs the tapered drill with a four-cutter countersink, intended to cut the seat quickly and leave a clean finish.

Per the maker’s documentation, the bits are high speed steel, and the set includes a hex wrench to adjust drilling depth by repositioning the countersink along the bit.

Specs:
– Set style: Tapered drill bit and countersink combination, sized by screw gauge
– Pieces: 3 countersink drill bits, plus a hex wrench
– Sizes: #6, #8, #10
– Countersink: Four-cutter design, per maker
– Material: High speed steel, per maker
– Shank: Not stated
– Plug cutters: Not included

View the DEWALT DW2535 set on Amazon

EZARC Countersink Drill Bit Set, 15 PCS with Wood Plug Cutters

Check price on Amazon

The EZARC 15-piece set takes the tapered combination concept and builds a full kit around it. The core is seven tapered drill bits covering gauges #4 through #12, with duplicates of the two smallest sizes, #4 and #6. Around that core the maker adds what the other sets leave out: two wood plug cutters in 3/8 inch and 1/2 inch, two depth stop rings, an extension bit shaft, Phillips driver bits and an Allen key, all in a storage box.

The plug cutters are the real differentiator: they cut plugs from an offcut of the same board, which glue over counterbored screw heads and sand flush, so the fastener disappears into the grain. The maker states the bits are nitrided high speed steel with an 82-degree counterbore angle, on 1/4 inch hex shanks.

Specs:
– Set style: Tapered drill bit and countersink combination, sized by screw gauge
– Pieces: 15 total, including 7 tapered drill bits and accessories
– Sizes: #4 (7/64 in) x2, #6 (9/64 in) x2, #8 (11/64 in), #10 (3/16 in), #12 (7/32 in)
– Material: Nitrided high speed steel, per maker
– Cutting angle: 82 degrees
– Shank: 1/4 in hex, quick change
– Depth stops: Two rings, 3/8 in and 1/2 in
– Plug cutters: Included, 3/8 in and 1/2 in

View the EZARC 15 PCS set on Amazon

BOSCH SP515 5 Piece Hex Shank Countersink Drill Bit Set

The Bosch SP515 represents the other family of sets: instead of tapered one-piece bits, it uses adjustable countersink heads over replaceable pilot bits. The set contains four screw pilot bits sized for #6, #8, #10 and #12 screws, plus an Allen wrench, making five pieces in total. Countersink depth is adjustable with the wrench, and when a pilot dulls or breaks, it alone can be replaced instead of the whole assembly.

Bosch states the bits produce precise, clean pilot holes in wood, plastic and composite materials, and the hex shank is intended to reduce slippage in the chuck. Because the pilots are straight rather than tapered, the hole profile suits modern screws with consistent shank diameters.

Specs:
– Set style: Adjustable countersink with replaceable straight pilot bits
– Pieces: 5 total, four pilot bits plus an Allen wrench
– Sizes: #6, #8, #10, #12 screw pilot bits
– Shank: Hex shank, per maker
– Depth: Adjustable with the included wrench
– Rated materials: Wood, plastic and composite, per maker
– Bit material: Not stated
– Plug cutters: Not included

View the Bosch SP515 set on Amazon

Amana Tool AMS-621 Carbide Tipped Countersink Set, 3-Pc

Check price on Amazon

Amana Tool’s AMS-621 is the industrial option in this group, a three-piece set of countersink assemblies built around carbide-tipped, two-wing countersinks in the standard 82-degree pattern. Each assembly pairs its countersink with a slow spiral HSS M2 drill bit and an adjustable revolving depth stop fitted with a no-thrust ball bearing, which stops rotating at the set depth so it will not burnish or mark veneered or lacquered surfaces the way a fixed collar can.

Amana rates these countersinks for natural woods, man-made boards, MDF, chipboard, plywood and non-ferrous materials. The drill bits are replaceable without removing the depth stop, per the maker, and carbide edges outlast plain high speed steel in abrasive sheet goods.

Specs:
– Set style: Countersink assemblies with adjustable ball-bearing depth stop
– Pieces: 3 countersink assemblies
– Countersink: Carbide tipped, 82 degrees, 2-wing, per maker
– Drill bits: HSS M2 slow spiral, replaceable, per maker
– Shank: Not stated
– Rated materials: Wood, boards, MDF, plywood and non-ferrous metals, per maker
– Plug cutters: Not included

View the Amana Tool AMS-621 set on Amazon

How to Choose

Start with the screw gauges you actually drive. Most furniture and cabinet screws fall in the #6 to #10 range, so a three-piece set can be enough, while a five-gauge set spanning #4 to #12 covers hinge screws and heavy frame screws too. Match the set’s stated drill diameter to your screw gauge: an undersized pilot in hardwood invites splits and snapped screws, and an oversized one leaves the threads too little wood to hold.

Next, decide between tapered combination bits and adjustable heads. Tapered bits mirror the profile of traditional wood screws and cut pilot, countersink and counterbore in one pass. Adjustable sets like the Bosch, or depth-stop assemblies like the Amana, trade setup time for control: depth can be dialed in and held across dozens of identical holes, and worn pilots can be replaced individually.

Material decides how long the edges last. Standard high speed steel is fine for softwood and occasional hardwood. M2 grade steel is a step up in edge retention, nitrided surfaces add wear resistance, and carbide-tipped countersinks are the durable choice for MDF, chipboard and plywood, whose glues dull plain steel quickly. Finally, check the shank: 1/4 inch hex shanks swap quickly and resist spinning in the chuck. If you plan to hide screws under plugs, confirm the set includes plug cutters or counterbores to a plug size.

Who Should Skip

Skip these sets if your fastening work is mostly in metal. Machine screws commonly need 90-degree or other countersink angles, and the tapered pilot bits in wood sets are profiled for wood screws, not holes in steel; a dedicated metal countersink set is the right tool there. If you only ever drive one screw size, a single countersink bit costs less than a full set.

Also skip the combination sets if your priority is chamfering existing holes, since a standalone countersink cutter does that job without a pilot bit dictating the hole size. And in rough carpentry where screw heads stay visible, the clean seats these sets cut will not justify the extra step.

FAQ

What angle should a countersink for wood screws be?

Nearly all countersinks for wood screws are ground to 82 degrees, matching the head angle of standard flat head wood screws, and all five sets here follow that convention. Machine screws often use different angles, so check the fastener first.

Are tapered pilot bits better than straight ones?

Tapered bits match the shape of traditional wood screws, giving the threads wood to bite along the full shank, which helps in hardwoods and near board ends. Straight pilot bits, like those in the Bosch set, suit modern screws with uniform shanks and are cheaper to replace.

Can countersink bits be used in an impact driver?

Sets with 1/4 inch hex shanks, including the FTG USA and EZARC sets here, fit impact drivers and quick-change holders. For hardwood and finish work, though, a drill driver at moderate speed gives better depth control and reduces the risk of snapping the slender pilot bits.

How do I stop the countersink from tearing the surface?

Tear-out usually comes from a dull cutter, excessive speed or pressing on after the seat is cut. Keep the cutter sharp, run the drill at moderate speed, and use a depth stop or tape flag so every seat stops at the same point. In veneer and plywood, scoring the surface briefly in reverse first also helps.

Final Verdict

For most woodworkers, the FTG USA five-piece set is the buy: full #4 to #12 gauge coverage, M2 steel tapered bits and hex shanks in a focused kit. The DEWALT DW2535 is a sound, narrower alternative for shops that live on #6 to #10 screws. Choose the EZARC set when plugs and depth stops are part of the job, the Bosch SP515 for adjustable, replaceable pilots, and the Amana AMS-621 when carbide edges and a non-marking depth stop justify a professional-grade set.

F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Countersink Bit Sets for Clean, Tear-Free Screw…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.