Updated Nov 20, 2026· 9 min read

Our Top Picks

  1. WORX Portable Folding Workbench1-(Pack)27.17 x 37.04 x 6.3 inches29.8 pounds
    Check on Amazon
  2. Pony Portable Folding Work Table32 pounds
    Check on Amazon
  3. Keter Heavy-Duty Folding Workbench with 11 Pack33.46 x 21.65 x 4.41 inches26.95 pounds
    Check on Amazon

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is WORX Pegasus 2-in-1 Folding Work Table and Sawhorse (WX051), with BLACK+DECKER Workmate 425 Portable Workbench (WM425) as a strong alternative.

A fixed bench eats floor space a small shop cannot spare, and it does nothing for you on a job site. Portable workbenches solve both problems, but they come in three distinct formats. Clamping jaw benches in the Workmate style grip workpieces between two jaw boards. Folding sawhorse tables open into a flat top and drop back down for carrying. Slab-top and strut-style stands trade built-in clamping for a bigger surface and much higher load ratings.

As an Amazon Associate, we earn from qualifying purchases.

The right pick depends on four numbers: maker-stated load capacity, work surface dimensions, folded size, and unit weight. Portability is the point of this category, so a bench that folds thin and carries in one hand earns its keep. This guide compares five well-known models across those measures, with included clamps and dogs.

This article contains affiliate links, and we may earn a commission when you buy through them, at no extra cost to you.

Contents
  1. Quick Answer
  2. WORX Pegasus 2-in-1 Folding Work Table and Sawhorse (WX051)
  3. BLACK+DECKER Workmate 425 Portable Workbench (WM425)
  4. Pony Portable Folding Work Table and Sawhorse
  5. Keter Folding Work Table Portable Workbench
  6. BORA Centipede CK6S Work Stand with Workbench Table Top
  7. How to Choose
  8. Who Should Skip
  9. FAQ
  10. Final Verdict

Quick Answer

The WORX Pegasus WX051 is the best portable workbench for most small shops: it opens to a 31 by 25 inch table in seconds, folds to a 5 inch thick package you can carry under one arm, and includes two quick clamps and four clamp dogs. Choose the Workmate 425 instead if jaw clamping matters more than table size.

WORX Pegasus 2-in-1 Folding Work Table and Sawhorse (WX051)

WORX Pegasus 2-in-1 Folding Work Table and Sawhorse (WX051)

WORX Pegasus 2-in-1 Folding Work Table and Sawhorse (WX051)

Check price on Amazon

The Pegasus is the folding sawhorse table format done well. It opens into a workbench with a 31 by 25 inch top at a 32 inch working height, and the same frame drops into a sawhorse rated far higher. WORX states a 300 lb capacity as a workbench and 1,000 lb as a sawhorse, so long boards and sheet goods resting across it are well within its design brief.

Clamping is the reason to buy it. Two quick clamps lock into tracks molded into the top, and four clamp dogs drop into the surface holes, giving a clamping width of up to 18 inches for holding boards flat while you cut, sand or route. Multiple units share the same height and link together when a bigger surface is needed.

Folded, it measures 35 by 25 by 5 inches and weighs around 30 lb, light enough to hang on a wall hook. The trade-off is the table rating: heavy benchtop machinery belongs on a higher-capacity stand.

Specs:
– Format: Folding work table and sawhorse, 2-in-1
– Work surface: 31 x 25 in
– Working height: 32 in
– Load capacity: 300 lb as a table, 1,000 lb as a sawhorse (maker stated)
– Folded size: 35 x 25 x 5 in
– Weight: Around 30 lb
– Included: 2 quick clamps, 4 clamp dogs
– Clamping width: Up to 18 in

See the WORX Pegasus WX051 on Amazon

BLACK+DECKER Workmate 425 Portable Workbench (WM425)

BLACK+DECKER Workmate 425 Portable Workbench (WM425)

BLACK+DECKER Workmate 425 Portable Workbench (WM425)

Check price on Amazon

The Workmate 425 is the original clamping jaw bench, and it remains the pick when holding a workpiece matters more than flat table area. Its dual cranking handles drive the jaw boards together, and the maker states it clamps vertically and horizontally, so doors and panels can be held on edge as well as flat. BLACK+DECKER rates it at 550 lb, with a steel frame under a laminated bamboo worktop.

The work surface measures 29 by 20-5/8 inches, smaller than the folding tables here, but four swivel pegs are included for bracing irregular shapes against the jaws. The legs adjust and fold, bringing the bench down to 29.25 by 8.88 by 29.5 inches for storage.

At 36.2 lb it is the heaviest single-piece unit in this guide. In exchange you get a genuine vise function none of the flat-top models replicate, plus a two-year warranty from the maker.

Specs:
– Format: Clamping jaw bench with adjustable legs
– Work surface: 29 x 20-5/8 in
– Load capacity: 550 lb (maker stated)
– Folded size: 29.25 x 8.88 x 29.5 in
– Weight: 36.2 lb
– Frame and top: Heavy-gauge steel, laminated bamboo worktop
– Included: 4 swivel pegs, one-handed clamp system
– Clamping: Vertical and horizontal

See the BLACK+DECKER Workmate 425 on Amazon

Pony Portable Folding Work Table and Sawhorse

Pony Portable Folding Work Table and Sawhorse

Pony Portable Folding Work Table and Sawhorse

Check price on Amazon

The Pony table follows the same 2-in-1 idea as the Pegasus but leans into adjustability. Its top is the same 31 by 25 inches, yet the aluminum leg frame sets at six heights from 30 to 35 inches, so the surface can match a table saw outfeed or suit a taller user. Pony states 500 lb as a workbench and 1,000 lb as a sawhorse.

The included kit is the most generous here: two 12 inch and two 6 inch E-Z Hold bar clamps, four bench dogs in two sizes, and two safety straps, so clamping a workpiece is possible straight out of the box in more configurations than the other tables allow.

It folds flat for storage and weighs 31.97 lb, on par with the Pegasus. If your work changes height often, the Pony is the folding table to shortlist.

Specs:
– Format: Folding work table and sawhorse, 2-in-1
– Work surface: 31 x 25 in
– Working height: Six settings, 30 to 35 in
– Load capacity: 500 lb as a table, 1,000 lb as a sawhorse (maker stated)
– Weight: 31.97 lb
– Frame: Aluminum legs
– Included: 2 x 12 in and 2 x 6 in E-Z Hold bar clamps, 4 bench dogs, 2 safety straps

See the Pony Portable Folding Work Table on Amazon

Keter Folding Work Table Portable Workbench

Keter Folding Work Table Portable Workbench

Keter Folding Work Table Portable Workbench

Check price on Amazon

The Keter is the slab-top folding bench of the group: a heavy-duty resin work surface on aluminum legs that opens with no assembly. Keter rates it at 1,000 lb, double the Pony’s table capacity and more than triple the Pegasus figure, making it the folding pick for benchtop tools, stacked lumber or a miter saw station.

The work surface measures 33.5 by 21.7 inches at a 29.7 inch height, the longest top in this guide though a little lower than the 32 inch tables. Two 12 inch clamps are included and mount to hold work horizontally or vertically, covering most cutting and assembly tasks.

The resin and aluminum construction shrugs off outdoor use and wipes clean after glue or finish work. The maker does not publish a unit weight in its listing data, so check the listing if carry weight is critical; the design folds flat for one-person moving.

Specs:
– Format: Slab-top folding workbench, no assembly
– Work surface: 33.5 x 21.7 in
– Working height: 29.7 in
– Load capacity: 1,000 lb (maker stated)
– Construction: Heavy-duty resin top, aluminum legs
– Weight: Not stated
– Included: 2 x 12 in adjustable clamps

See the Keter Folding Work Table on Amazon

BORA Centipede CK6S Work Stand with Workbench Table Top

BORA Centipede CK6S Work Stand with Workbench Table Top

BORA Centipede CK6S Work Stand with Workbench Table Top

Check price on Amazon

The Centipede takes the opposite approach: a collapsible steel strut frame that fans open into a support grid, topped here with BORA’s 24 by 48 inch workbench top. BORA rates the CK6S configuration at 2,500 lb, by far the highest capacity in this guide, and the 30 inch working height suits sheet goods breakdown and tool stations.

The included table top has 3/4 inch dog holes, and the stand ships with two quick clamps, four X-Cups that cradle 2×4 lumber, and a carry bag. Without the top, the same struts support a full sheet of plywood directly for cutting stations.

Portability is the surprise: the stand weighs 12.5 lb and folds to a 6 by 9 by 38 inch bundle that fits in the bag. The top travels as a separate rigid piece, but nothing else here matches its capacity-to-weight ratio.

Specs:
– Format: Collapsible strut work stand with removable table top
– Work surface: 24 x 48 in (2 x 4 ft)
– Working height: 30 in
– Load capacity: 2,500 lb (maker stated)
– Folded size: 6 x 9 x 38 in
– Stand weight: 12.5 lb
– Construction: Heavy-duty steel struts, polymer P-Tops
– Included: Table top with 3/4 in dog holes, 2 quick clamps, 4 X-Cups, carry bag

See the BORA Centipede CK6S with Table Top on Amazon

How to Choose

Start with the format. If most of your work involves holding boards, doors or frames steady for cutting and planing, a clamping jaw bench like the Workmate 425 is the only design here with a real vise action. If you need a general surface that appears and disappears, the folding tables from WORX and Pony deploy faster, and the Pony adds height adjustment.

Next, read the load capacity the way the maker states it. Table and sawhorse ratings differ sharply on 2-in-1 models, so compare the figure for the mode you will actually use. For machinery or sheet goods, the Keter and the Centipede stand in a different league.

Finally, weigh the carry. Folded thickness and unit weight decide whether a bench gets used or left in the corner. Anything around 30 lb with a flat fold suits one-person carrying; the Centipede stand is far lighter but its top travels separately. Check that included clamps and dogs match your work.

Who Should Skip

Skip portable benches entirely if your work is heavy hand-planing, chopping mortises or hammering assemblies all day. Those forces call for mass and rigidity no folding frame provides, and a fixed bench will serve you better.

Skip the clamping jaw format if your projects are mostly large panels and sheet goods, since the Workmate’s surface is the smallest here. Skip the high-capacity stands if you rarely lift anything heavy onto the bench, because you pay for capacity in setup parts and storage bulk. And if you work seated, check the working heights above first, since none of these drop to chair level.

FAQ

How much weight can a portable workbench really hold?

Go by the maker-stated rating for the exact model and mode. Here the figures run from 300 lb for the Pegasus in table mode to 2,500 lb for the Centipede. Ratings assume an evenly spread load on a level floor, so keep heavy items centered rather than perched on one edge.

Can a folding work table replace a real workbench?

For assembly, sanding, finishing, cutting support and site work, yes for most small shops. For heavy hand-tool work that pushes sideways against a vise, a portable bench will flex and walk in ways a fixed bench will not. Many woodworkers keep both.

What is the difference between clamp dogs and swivel pegs?

Both brace work against a stop. Clamp dogs drop into holes in the top and pair with track clamps, as on the Pegasus and Pony. The Workmate’s swivel pegs fit its jaw boards and rotate to grip odd shapes. Either holds work for sanding and routing; neither replaces a bench vise for high-force tasks.

Do these benches need assembly?

The Keter and Centipede open with no assembly, and the folding tables set up in seconds. The Workmate 425 requires initial assembly of its frame and jaw hardware before first use. After that, every model folds or collapses for storage without tools.

Final Verdict

For most small shops and job sites, the WORX Pegasus WX051 hits the best balance of surface size, clamping gear and carry weight. Pick the Workmate 425 when jaw clamping is the priority, the Pony for height adjustment and the fullest clamp bundle, the Keter for a no-assembly slab top with a 1,000 lb rating, and the Centipede CK6S when capacity and the lightest carry matter most.

F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Portable Workbenches for Small Shops and Job…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.