Key takeaways
- Compare the best drill bit sets for wood, metal and plastic, with titanium and cobalt options, size ranges, shank types and storage cases explained.
What's inside
- Quick Answer
- DEWALT Titanium Nitride Coated Drill Bit Set, Pilot Point, 21-Piece (DW1361)
- Milwaukee SHOCKWAVE RED HELIX Titanium Drill Bit Set, 23-Piece (48-89-4631)
- IRWIN Drill Bit Set, M35 Cobalt Alloy Steel, 29-Piece (3018002)
- Bosch CO21B 21-Piece Cobalt M42 Metal Drill Bit Set
- Makita B-65399 Impact Gold 14 Pc. Titanium Drill Bit Set
- How to Choose
- Who Should Skip
- FAQ
- Final Verdict
- Quick Answer
- DEWALT Titanium Nitride Coated Drill Bit Set, Pilot Point, 21-Piece (DW1361)
- Milwaukee SHOCKWAVE RED HELIX Titanium Drill Bit Set, 23-Piece (48-89-4631)
- IRWIN Drill Bit Set, M35 Cobalt Alloy Steel, 29-Piece (3018002)
- Bosch CO21B 21-Piece Cobalt M42 Metal Drill Bit Set
- Makita B-65399 Impact Gold 14 Pc. Titanium Drill Bit Set
- How to Choose
- Who Should Skip
- FAQ
- Final Verdict
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Drill Bit Sets for Woodworkers and Home Shops
A woodworking shop runs on twist bits far more often than most people expect. Beyond boring into pine and plywood, the same index box gets opened for pilot holes in hardwood, clearing holes in steel hinges and brackets, and punching through plastic jigs and templates. A general-purpose set that covers wood, metal, and plastic in one case saves constant trips back to the hardware store, and keeps the sizes you reach for most in one labeled place.
As an Amazon Associate, we earn from qualifying purchases.
The five sets below are all fractional-inch twist bit assortments built for that mixed workload. They differ mainly in alloy and coating, in how finely their sizes step up, in whether the shanks suit a standard chuck or an impact driver, and in the case. Specs are given exactly as each maker lists them, so you can match a set to your own shop.
This article contains affiliate links, and we may earn a commission when you buy through them at no extra cost to you.
Contents
- Quick Answer
- DEWALT Titanium Nitride Coated Drill Bit Set, Pilot Point, 21-Piece (DW1361)
- Milwaukee SHOCKWAVE RED HELIX Titanium Drill Bit Set, 23-Piece (48-89-4631)
- IRWIN Drill Bit Set, M35 Cobalt Alloy Steel, 29-Piece (3018002)
- Bosch CO21B 21-Piece Cobalt M42 Metal Drill Bit Set
- Makita B-65399 Impact Gold 14 Pc. Titanium Drill Bit Set
- How to Choose
- Who Should Skip
- FAQ
- Final Verdict
Quick Answer
For most woodworkers, the DEWALT DW1361 21-piece titanium nitride set is the best all-around pick: it covers 1/16 inch to 1/2 inch, its Pilot Point tips start cleanly in wood and sheet metal, and the case keeps bits indexed. If you drill stainless steel often, step up to a cobalt set like the IRWIN 3018002 or Bosch CO21B. Impact driver users should pick a hex shank set.
DEWALT Titanium Nitride Coated Drill Bit Set, Pilot Point, 21-Piece (DW1361)
DEWALT builds this set around its Pilot Point tip geometry, designed to start on contact and drill cleaner holes with less walking on flat stock. That matters in a wood shop, where a bit that skates across a finished face can ruin a workpiece before the hole even starts. The titanium nitride coating reduces friction, and DEWALT pairs it with a tapered web design that adds strength along the flute, aimed at cutting down on breakage in the small sizes that snap most often.
The size run is the classic general-purpose spread, and DEWALT doubles up the smallest, most-used sizes: two each of 1/16, 5/64, 3/32, 7/64, and 1/8 inch, then single bits up through 1/2 inch. A spare 1/8 inch bit saves a project when the first one dulls or breaks. The bits ride in a plastic tough case with a clear lid and clip latch, part of DEWALT’s connectable accessory storage system.
Specs:
- Pieces: 21
- Size range: 1/16 inch to 1/2 inch
- Material: high-speed steel with titanium nitride coating
- Tip: Pilot Point
- Shank: no-spin shank design
- Case: plastic tough case with clear lid
- Model: DW1361
Milwaukee SHOCKWAVE RED HELIX Titanium Drill Bit Set, 23-Piece (48-89-4631)
Milwaukee’s SHOCKWAVE line is built for impact drivers as much as for drills, and that shows in the 1/4 inch hex shanks across this set. The hex shank locks into an impact driver’s quick-release collet and also works in a standard three-jaw chuck, so one set can move between both tools. The RED HELIX flute design uses a variable helix geometry that Milwaukee says clears chips quickly, and the titanium coating is rated by the maker for longer life than black oxide bits.
Size coverage stops at 3/8 inch rather than 1/2 inch, the trade-off for the impact format. Within that range the set is generous with duplicates: two each of 1/16, 5/64, 7/64, 1/8, 9/64, 5/32, 3/16, and 1/4 inch, plus singles in the steps between. For furniture work, cabinet hardware, and assembly drilling, that spread covers the vast majority of holes. The case is part of Milwaukee’s customizable accessory system, with removable rows that can be rearranged or moved into compatible cases.
Specs:
- Pieces: 23
- Size range: 1/16 inch to 3/8 inch
- Material: titanium coated alloy steel
- Tip: 135-degree split point
- Shank: 1/4 inch hex shank, impact duty
- Case: customizable accessory case with removable rows
- Model: 48-89-4631
IRWIN Drill Bit Set, M35 Cobalt Alloy Steel, 29-Piece (3018002)
Cobalt is the step up when a shop regularly drills metal that defeats ordinary high-speed steel: stainless hardware, cast iron, and hardened fasteners. IRWIN mills this set from M35 cobalt alloy steel, chosen for the heat resistance needed to keep an edge in abrasive, hard stock. In wood the cobalt bits behave like any quality twist bit, but the alloy earns its place the first time a project involves drilling out a broken screw or boring into stainless angle.
The real advantage here is size resolution. Twenty-nine pieces step from 1/16 inch to 1/2 inch in 1/64 inch increments, with no gaps. That matters for tap holes, clearance holes for specific bolts, and dowel work where a 64th either way changes the fit. The bits come in a metal index case, the traditional hinged steel box that stands up to shop abuse and keeps each size stamped and sorted.
Specs:
- Pieces: 29
- Size range: 1/16 inch to 1/2 inch in 1/64 inch increments
- Material: M35 cobalt alloy steel
- Tip: 135-degree split point
- Shank: not stated
- Case: metal index case
- Model: 3018002
Bosch CO21B 21-Piece Cobalt M42 Metal Drill Bit Set
Bosch takes the cobalt idea a grade further with M42 alloy, the harder of the two common cobalt blends used in drill bits. Bosch lists this set for drilling in stainless steel, cast iron, titanium, light-gauge metal, and aluminum, making it a sensible pick for woodworkers who also fabricate metal brackets, repair machinery, or drill into steel jig parts. The three-flat shank is a practical detail: the flats give a drill chuck three positive faces to grip, helping keep a bit from spinning in the chuck under load.
With 21 pieces, the CO21B covers the standard fractional range without the full 1/64 inch ladder of a 29-piece index, so there are gaps at the in-between sizes. For most shop work that is a fair trade. Bosch includes a storage case with the set. As with all cobalt bits, the alloy is harder but more brittle than standard high-speed steel, so these reward straight, steady feed pressure rather than side loading.
Specs:
- Pieces: 21
- Size range: 1/16 inch to 1/2 inch
- Material: cobalt M42 alloy steel
- Tip: split point
- Shank: three-flat shank
- Case: included storage case
- Model: CO21B
Makita B-65399 Impact Gold 14 Pc. Titanium Drill Bit Set
Makita’s Impact Gold set is the compact option in this group, aimed at impact driver owners who want a small case that lives in a tool bag rather than on the bench. All fourteen bits carry 1/4 inch hex shanks and a titanium nitride coating, which Makita rates as lasting longer than non-coated bits. The 135-degree split point starts holes without walking, useful for quick hardware and assembly work.
The size range is deliberately narrow, running from 1/16 inch up to 1/4 inch with duplicates of the common small sizes. That makes this a companion set rather than a shop’s only index: it covers pilot holes, clearance holes for common screws, and light metal drilling, but anything above 1/4 inch needs another set. For woodworkers who already own a full bench index, that focus is exactly the point.
Specs:
- Pieces: 14
- Size range: 1/16 inch to 1/4 inch
- Material: titanium nitride coated steel
- Tip: 135-degree split point
- Shank: 1/4 inch hex shank
- Case: plastic storage case
- Model: B-65399
How to Choose
Start with the material you drill most. Plain and coated high-speed steel, like the titanium nitride sets above, handles wood, plastic, aluminum, and mild steel comfortably, and it is the economical default for a wood-focused shop. Cobalt alloy sets cost more and are more brittle, but they hold an edge in stainless steel, cast iron, and other hard, abrasive metals where coated bits dull quickly. Buy cobalt for the metal work you actually do, not as a general upgrade.
Next, look at size coverage and step resolution. A 21-piece set that jumps in wider steps is fine for pilot holes and general boring. A 29-piece index with 1/64 inch increments matters when you drill tap holes, match clearance holes to specific fasteners, or fit dowels precisely. Also check for duplicates: sets that include two of the smallest sizes save frustration, because small bits are the ones that break.
Shank style decides which tools the set fits. Round and three-flat shanks belong in drill chucks and drill presses. A 1/4 inch hex shank snaps into impact drivers and also works in a chuck, but short hex-shank bits are poor for deep holes. Finally, weigh the case: a labeled, latching case keeps bits in size order, and metal index cases tolerate shop life better than thin plastic.
Who Should Skip
If your drilling is almost entirely in wood and you want clean, flat-bottomed or splinter-free holes, a general twist set is the wrong tool category: brad point bits, Forstner bits, and spade bits each beat twist bits at specific wood-only jobs, and they are covered in their own guides. Anyone drilling masonry or concrete needs carbide-tipped masonry bits, which none of these sets include. Machinists who need letter, number, or metric sizes should skip consumer indexes and buy jobber bits by the size. And if you only need one or two sizes for a single repair, individual bits beat paying for a full set you will never open again.
FAQ
Is titanium coating or cobalt better for a wood shop?
For wood, plastic, and mild steel, titanium nitride coated high-speed steel is plenty and costs less. Cobalt is worth choosing when stainless steel, cast iron, or hardened metal shows up regularly, because the alloy itself, not just a surface coating, resists the heat those materials generate.
Can hex shank bits be used in a regular drill or drill press?
Yes. A 1/4 inch hex shank can be gripped by a standard three-jaw chuck as well as an impact driver collet. Keep in mind that hex shank bits are usually shorter, so they are not ideal for deep holes.
Why do some sets include two bits of the same size?
Small bits, especially 1/8 inch and below, break and dull faster than large ones. Makers duplicate the most-used small sizes so a single snapped bit does not stop the job, which is why the DEWALT and Milwaukee sets carry pairs of their smallest sizes.
What is the difference between a 21-piece and a 29-piece set?
Both usually span 1/16 inch to 1/2 inch. The 29-piece set fills every 1/64 inch step, while a 21-piece set skips some intermediate sizes or duplicates popular ones instead. The finer ladder matters for tap holes and precise clearance fits.
Final Verdict
The DEWALT DW1361 is the set to buy first for a general home shop: sensible size coverage, duplicated small bits, tips that start cleanly, and a case that keeps it all together. Add the IRWIN 3018002 when you need full 1/64 inch resolution or regular work in hard metal, or the Bosch CO21B for an M42 cobalt set with chuck-friendly three-flat shanks. If your drilling happens mostly with an impact driver, the Milwaukee 48-89-4631 covers the common sizes, and the compact Makita B-65399 makes a focused second set for the tool bag.
Related guides
Read next
- Best Router Bit Sets for Beginner and Mid-Level Shops
- Best Countersink Drill Bit Sets for Clean Screw Holes
- Best Benchtop Band Saws for Home Woodworking Shops
- Best Forstner Bit Sets for Clean, Flat-Bottomed Holes
- Best Shop Air Filtration Systems for Woodworking Dust
- Best Safety Glasses for Woodworking and Dusty Shops
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!