Updated Nov 20, 2026· 10 min read

Key takeaways

  • Compare the best bench grinders for sharpening chisels, plane irons and turning tools, from slow-speed to variable-speed models, with full specs.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is RIKON 80-805 8-Inch Slow Speed Bench Grinder, with BUCKTOOL TDS-200DS 8-Inch Dual Speed Bench Grinder as a strong alternative.

For sharpening chisels, plane irons and turning tools, the best bench grinder is a slow-speed 8-inch model running near 1,750 RPM, because the slower wheel builds far less heat and protects the temper of thin edges. The RIKON 80-805 is the standout dedicated sharpener in this roundup, the BUCKTOOL TDS-200DS adds a second high-speed setting for general grinding, and the WEN BG4286 delivers the same slow-speed layout in a budget tier. If your bench is small, the Delta 23-196 variable-speed 6-inch grinder and the DEWALT DW756 cover compact and heavy-duty needs respectively.

As an Amazon Associate, we earn from qualifying purchases.

Contents
  1. Table of Contents
  2. Quick Picks
  3. 1. RIKON 80-805 8-Inch Slow Speed Bench Grinder
  4. 2. BUCKTOOL TDS-200DS 8-Inch Dual Speed Bench Grinder
  5. 3. WEN BG4286 8-Inch Slow Speed Bench Grinder
  6. 4. Delta 23-196 6-Inch Variable Speed Bench Grinder
  7. 5. DEWALT DW756 6-Inch Bench Grinder
  8. How to Choose a Bench Grinder for Sharpening
  9. FAQ
  10. Conclusion

Table of Contents

Quick Picks

  • Best overall for sharpening: RIKON 80-805 — a dedicated 1,750 RPM slow-speed grinder with 60 and 120 grit white aluminum oxide wheels, a grooved drill-bit rest and a diamond dresser in the box.
  • Best dual-purpose machine: BUCKTOOL TDS-200DS — switches between 1,725 RPM for edges and 3,450 RPM for stock removal, so one machine covers sharpening and general shop grinding.
  • Best budget slow-speed pick: WEN BG4286 — the same 1,750 RPM, 8-inch format as the premium sharpeners, with a soft-start 3-amp motor in the budget tier.
  • Best compact variable-speed pick: Delta 23-196 — a 6-inch grinder with a dial that runs from 2,000 to 3,400 RPM for shops that sharpen and grind in equal measure.
  • Best heavy-duty 6-inch pick: DEWALT DW756 — a cast-iron, high-speed workhorse for reshaping damaged edges and general grinding, best paired with a light touch on fine tools.

1. RIKON 80-805 8-Inch Slow Speed Bench Grinder

RIKON 80-805 8-Inch Slow Speed Bench Grinder

RIKON 80-805 8-Inch Slow Speed Bench Grinder

Check price on Amazon

The RIKON 80-805 is built around a single job: grinding edges without overheating them. Its induction motor turns the wheels at 1,750 RPM, roughly half the speed of a standard grinder, so a chisel bevel spends less time in contact with the abrasive and stays well below the temperature that would soften the steel. That makes it the natural centerpiece of a sharpening station, especially for turning tools that need frequent, quick touch-ups at the lathe.

The included wheels suit the work. The 60-grit wheel handles reshaping and nick repair, while the 120-grit wheel refines the bevel before honing on stones. Both are white aluminum oxide, a friable abrasive that fractures to expose fresh cutting edges and runs cooler than standard gray wheels. The left tool rest has a machined groove that cradles drill bits at a consistent angle, and RIKON includes a diamond wheel dresser for keeping the wheel faces flat and clean. A cast iron base with anti-vibration rubber feet keeps the machine planted, and the five-year warranty is the longest in this group. This is a premium-tier machine aimed squarely at woodworkers rather than general metalwork.

Specs:

  • Motor: 1/2 HP induction, 120V, 3 amps
  • Speed: 1,750 RPM, fixed slow speed
  • Wheels: 8-inch diameter x 1-inch wide, 5/8-inch arbor
  • Wheel grits: 60 grit and 120 grit white aluminum oxide
  • Base: cast iron with anti-vibration rubber feet
  • Tool rests: adjustable, left rest grooved for drill bits
  • Included extras: diamond wheel dresser, eye shields, spark arrestors
  • Warranty: 5 years

2. BUCKTOOL TDS-200DS 8-Inch Dual Speed Bench Grinder

BUCKTOOL TDS-200DS 8-Inch Dual Speed Bench Grinder

BUCKTOOL TDS-200DS 8-Inch Dual Speed Bench Grinder

Check price on Amazon

Most grinders force a choice between slow and fast. The BUCKTOOL TDS-200DS avoids it with a dual-speed induction motor: 1,725 RPM for controlled sharpening and 3,450 RPM for faster material removal. A woodworker can hollow-grind a plane iron at low speed in the morning and clean up a mower blade or reshape a damaged screwdriver tip at high speed in the afternoon, all on one machine bolted to the bench.

The 8-inch wheels are white aluminum oxide in 80 and 120 grit, a finer starting pair than most grinders ship with, and the package also includes a buffing wheel for polishing work. The cast iron base gives the machine real heft at roughly 45 pounds, which helps it run smoothly at both speeds. Precision-machined flanges and a 5/8-inch shaft keep the wheels tracking true, an important detail when a wobbling wheel would round over a carefully set bevel. Tool rests and spark deflectors are included for both sides. For a shop that only has room or budget for one grinder, this mid-range to premium-tier model is the most flexible option here.

Specs:

  • Motor: 1/2 HP induction
  • Speed: dual speed, 1,725 RPM and 3,450 RPM
  • Wheels: 8-inch diameter, 5/8-inch shaft
  • Wheel grits: 80 grit and 120 grit white aluminum oxide, plus buffing wheel
  • Base: cast iron
  • Included components: two tool rests, two spark deflectors
  • Weight: about 45 pounds
  • Dimensions: about 17 x 10.6 x 16.5 inches

3. WEN BG4286 8-Inch Slow Speed Bench Grinder

WEN BG4286 8-Inch Slow Speed Bench Grinder

WEN BG4286 8-Inch Slow Speed Bench Grinder

Check price on Amazon

The WEN BG4286 brings the slow-speed sharpening format down to the budget tier. Its 3-amp motor has a soft-start feature that spools the wheels up gently instead of jolting to full speed, and it settles at 1,750 RPM — the same working speed as the RIKON — so chisels, plane irons and turning tools get the same low-heat treatment. For a first dedicated sharpening grinder, that is the specification that matters most.

The wheel set mirrors the premium machines: a 60-grit wheel for general grinding and a 120-grit wheel for finer finishing, both 8 inches by 1 inch with 5/8-inch arbors. Pivoting tool rests let you set repeatable bevel angles, and adjustable eye guards are included. At about 34 pounds the cast base is lighter than the RIKON or BUCKTOOL, so bolting it to the bench or a plywood base is worthwhile for steady work. There is no included wheel dresser, so plan on adding one to keep the wheels flat. Within this roundup it is the value route into 8-inch slow-speed grinding, and it carries a two-year warranty from WEN.

Specs:

  • Motor: 3-amp with soft start
  • Speed: up to 1,750 RPM
  • Wheels: 8-inch diameter x 1-inch wide, 5/8-inch arbor
  • Wheel grits: 60-grit general wheel and 120-grit fine finish wheel
  • Tool rests: pivoting, adjustable
  • Safety: adjustable eye guards
  • Weight: about 34 pounds
  • Dimensions: 14.5 x 7.75 x 8 inches

4. Delta 23-196 6-Inch Variable Speed Bench Grinder

Delta 23-196 6-Inch Variable Speed Bench Grinder

Delta 23-196 6-Inch Variable Speed Bench Grinder

Check price on Amazon

Where the slow-speed machines commit to one speed, the Delta 23-196 offers a dial. Its upfront variable speed control runs from 2,000 to 3,400 RPM, so the same grinder can be turned down toward sharpening territory for a chisel and turned up for deburring, rust removal or shaping hardware. The low end does not reach a true 1,750 RPM slow speed, so edges need a lighter touch and more frequent cooling dips than on the RIKON or WEN, but the flexibility is real.

The 6-inch wheels are 3/4 inch thick, in 36 and 60 grit, mounted on a 1/2-inch shaft. A work light on a flexible arm illuminates the contact point, which helps when grinding small bevels, and the tool rests include a grooved rest for drill bits. The induction motor is rated at 2.5 amps, the machine weighs about 27.5 pounds net, and Delta backs it with a five-year warranty. As a mid-range compact machine for a small shop that sharpens occasionally and grinds often, it earns its place here.

Specs:

  • Motor: 2.5-amp induction, 120V
  • Speed: variable, 2,000 to 3,400 RPM via front dial
  • Wheels: 6-inch diameter x 3/4-inch thick
  • Wheel grits: 36 grit and 60 grit
  • Shaft diameter: 1/2 inch
  • Extras: flexible work light, tool rests with drill-bit groove
  • Weight: 27.5 pounds net
  • Warranty: 5 years

5. DEWALT DW756 6-Inch Bench Grinder

DEWALT DW756 6-Inch Bench Grinder

DEWALT DW756 6-Inch Bench Grinder

Check price on Amazon

The DEWALT DW756 is the traditional high-speed grinder of the group, and it earns its spot for reshaping work: grinding out a deep nick, re-establishing a bevel on a badly worn chisel, or squaring a mushroomed cold chisel before finer sharpening happens elsewhere. Its 5/8 HP induction motor runs at 3,450 RPM for fast material removal, and the industrial cast iron base and motor housing are built for daily use.

Precision-machined aluminum tool rests allow accurate positioning of the workpiece, and the 12-1/2-inch distance between the wheels gives clearance for longer tools. Rear exhaust ports in the wheel guards keep operation smooth, and the machine measures 15 inches long at 28.5 pounds, so it fits benches that cannot take an 8-inch grinder. The honest caution for sharpeners: at full speed this machine builds heat quickly, so fine edges demand light pressure, short passes and a water pot within reach. It sits in the mid-range tier and carries DEWALT’s three-year limited warranty.

Specs:

  • Motor: 5/8 HP induction, 4 amps
  • Speed: 3,450 RPM
  • Wheels: 6-inch diameter
  • Wheel grits: 36 grit and 60 grit
  • Base and housing: industrial cast iron
  • Tool rests: precision-machined aluminum
  • Wheel spacing: 12-1/2 inches between wheels
  • Weight: 28.5 pounds
  • Warranty: 3-year limited

How to Choose a Bench Grinder for Sharpening

Start with speed. Wheel speed is the single biggest factor in sharpening success. A slow-speed grinder near 1,750 RPM removes metal gradually and keeps heat out of the edge, which protects the temper of chisels, plane irons and high-speed steel turning tools. Standard 3,450 RPM machines remove metal twice as fast but can blue a thin edge in seconds. Dual-speed and variable-speed models split the difference and suit shops that grind as much as they sharpen.

Choose wheel size and type. Eight-inch wheels run cooler than 6-inch wheels at the same RPM because the surface speed is spread over a larger wheel, and their shallower hollow grind suits wide plane irons. White aluminum oxide wheels are the right default for tool steel: they cut cool and shed worn grains. A 60-grit wheel handles reshaping, a 120-grit wheel refines, and many turners later fit a CBN wheel, which requires a grinder with a 5/8-inch arbor and enough clearance.

Check the tool rests. The rest, not the wheel, sets your bevel angle. Look for rests that adjust smoothly, lock firmly and sit close to the wheel. A grooved rest for drill bits is a useful bonus. Many woodworkers eventually replace stock rests with an aftermarket sharpening platform or jig system, so a flat, sturdy rest casting is a good foundation.

Weigh the base and motor. Cast iron bases and induction motors run quieter and smoother than stamped bases and universal motors. Heavier machines vibrate less, and vibration is the enemy of a clean bevel. Bolt the grinder down or mount it on a heavy plywood base for the steadiest results.

Plan for dressing and safety. Aluminum oxide wheels load up and glaze, so a wheel dresser belongs in the budget if one is not included. Eye shields, spark arrestors and adjustable rests are standard safety equipment; keep the gap between rest and wheel small as the wheel wears.

FAQ

Is a slow-speed grinder really better for sharpening woodworking tools?

Yes, for edge tools it is. A wheel turning at about 1,750 RPM removes steel more slowly and generates far less friction heat, so the thin edge of a chisel or plane iron keeps its hardness. High-speed grinders still work for reshaping and rough grinding, but they demand a lighter touch and frequent cooling to avoid drawing the temper from the steel.

What wheel grit should I use for chisels and plane irons?

A two-wheel setup covers most sharpening: around 60 grit for reshaping bevels and repairing nicks, and around 120 grit for refining the edge before honing. White aluminum oxide is the preferred wheel material for tool steel because it runs cool. Final sharpness still comes from honing on stones or a strop after grinding the bevel.

Can I fit a CBN wheel to these grinders?

In most cases, yes. CBN wheels are commonly made for 8-inch slow-speed grinders with 5/8-inch arbors, which matches the RIKON, BUCKTOOL and WEN in this roundup. Check the wheel maker’s stated requirements for arbor size, wheel width and guard clearance before ordering, and never exceed the wheel’s rated maximum speed.

Do I still need sharpening stones if I own a bench grinder?

Yes. A bench grinder establishes or restores the bevel quickly, but it leaves a relatively coarse, hollow-ground surface. Honing on water stones, diamond plates or a strop removes the burr and polishes the edge to working sharpness. The grinder and the stones do different halves of the same job.

Conclusion

For a sharpening-first shop, the RIKON 80-805 is the cleanest answer: true slow speed, the right wheels, a dresser in the box and a long warranty. The BUCKTOOL TDS-200DS is the pick when one machine must sharpen and grind, the WEN BG4286 delivers the slow-speed format in the budget tier, the Delta 23-196 adds dial-a-speed flexibility in a compact frame, and the DEWALT DW756 remains the heavy-duty reshaping tool. Match the speed to the steel, keep the rests adjusted, and any of these five will keep a shop’s edges in working order.

F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Bench Grinders for Sharpening Woodworking ToolsCheck price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.