Key takeaways
- Compare the best router inlay kits for templates, signs and joinery, with brass bushings, collars, centering pins and bits compared kit by kit.
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Router Inlay Kits for Templates, Signs and Joinery
- Top Pick: Whiteside Router Bits 9500 Solid Brass Inlay Kit
- Runner-up: POWERTEC 71333 Router Brass Inlay Kit
- Also consider: Milescraft 1207 Design/Inlay Kit
A router inlay kit lets a plunge router cut a decorative inlay and the recess it sits in from a single template, so the two pieces match closely enough to glue up. The trick is a guide bushing with a removable collar: one pass follows the template with the collar fitted, the second follows the same template with the collar removed, and the difference between the two bushing diameters is exactly twice the bit diameter, which is what makes the pair match. It is the standard way to set bow ties across a cracked slab, drop a motif into a box lid, or add shapes to signs.
As an Amazon Associate, we earn from qualifying purchases.
The kits compared here all work on that principle, but they differ in what is actually in the box. Some are bare bushing kits that expect shop-made templates, one is a complete starter system with its own base plate and patterns, and one is a template set that pairs with a separate starter kit. The comparison below sticks to what each maker lists: the guide bushing, the collar or spacer, the centering pin, the bit size and type, the bushing material, the stated base fit, and the bit shank size.
This article contains affiliate links, and if you buy through them the site may earn a commission at no extra cost to you.
Quick Answer
For most woodworkers, the Whiteside 9500 is the router inlay kit to buy first: solid brass guide ring and removable spacer, a centering pin, and a 1/8 inch solid carbide spiral bit that cut the inlay and its recess from one 1/4 inch template. The POWERTEC 71333 covers the same ground where the Whiteside is hard to find.
Whiteside Router Bits 9500 Solid Brass Inlay Kit
Specs:
- Maker and model: Whiteside 9500
- Kit contents: template guide ring, removable spacer with an O-ring, centering pin, 1/8 inch solid carbide spiral bit (part RD1600), instructions
- Bushing material: solid brass
- Bit: 1/8 inch cutting diameter, solid carbide spiral, down-cut
- Bit shank: not stated
- Base fit: base plates and adapters with a standard 1-3/16 inch recessed template-guide hole
- Template stock: 1/4 inch thick patterns
The Whiteside 9500 is the reference design for this category. The guide ring mounts in the router base, the centering pin aligns the ring with the spindle before the bit goes in, and the brass spacer slips over the ring with an O-ring keeping it snug. The maker has you cut a pattern in quarter-inch material, trace the inlay with the spacer removed, then refit the spacer and trace the recess. Because the ring and spacer are solid brass, the surfaces that ride against the template wear slowly and slide smoothly. No templates are included, so the shapes you can cut are limited only by the patterns you make. For a shop with a plunge router that has a standard template-guide recess, it is the most direct route to repeatable inlay work.
View it on Amazon: https://www.amazon.com/dp/B0012JI6HM?tag=powertoolsdiy04-20
POWERTEC 71333 Router Brass Inlay Kit
Specs:
- Maker and model: POWERTEC 71333
- Kit contents: universal guide bushing with retainer nut, snap-on collar, alignment pin, 1/8 inch solid carbide spiral bit, instructions
- Bushing material: solid brass (bushing, retainer nut, and collar)
- Bit: 1/8 inch diameter, solid carbide spiral, downcut, 3/4 inch cutter length
- Bit shank: 1/4 inch
- Base fit: universal bushing; an adapter plate may be needed for some routers
- Template stock: 1/4 inch templates
The POWERTEC 71333 follows the same layout as the Whiteside, with a threaded universal bushing held by a retainer nut and a collar that snaps on for the second pass. POWERTEC lists the bushing, nut, and collar as solid brass, and the included bit is a solid carbide spiral with a 3/4 inch cutter length on a 1/4 inch shank, giving more depth than shorter inlay bits in thick stock. The listing is candid that the universal bushing may still need an adapter plate on some router bases, so checking your base opening before ordering is worthwhile.
View it on Amazon: https://www.amazon.com/dp/B07SJS2XXJ?tag=powertoolsdiy04-20
Milescraft 1207 Design/Inlay Kit
Specs:
- Maker and model: Milescraft 1207 Design/Inlay Kit
- Kit contents: base plate, six mounting screws, 24mm, 17mm, and 7/16 inch (11.11mm) bushings, centering pin, 1/8 inch (3.2mm) down-spiral bit, 1/4 inch (6.35mm) V-groove bit, pencil guide, pencil, two template bases, and heart/star, bow-tie, petal, and geometric templates
- Bushing material: metal; the maker does not state the alloy
- Bit shank: not stated
- Base fit: Milescraft base plate system; the manual includes a compatibility chart
The Milescraft 1207 is the outlier here because it is a system rather than a single bushing kit. Instead of relying on your router’s template-guide recess, it mounts the maker’s base plate and works with bushings in 24mm, 17mm, and 7/16 inch sizes. The manual notes that the 24mm bushing produces a less intricate design while the 17mm bushing follows the pattern more closely, and its included 1/8 inch down-spiral bit handles inlay pockets and the matching pieces, with a V-groove bit for engraved designs. It is the easiest start for ready-made shapes, though the base plate system ties you to Milescraft’s template format rather than shop-made patterns.
View it on Amazon: https://www.amazon.com/dp/B000KI8SCO?tag=powertoolsdiy04-20
Freud FT1500 Inlay Template Guide Set with Router Bit
Specs:
- Maker and model: Freud FT1500
- Kit contents: inlay template guide set with a router bit included, per the maker’s listing
- Bushing material: not stated
- Bit diameter: not stated
- Bit shank: not stated
- Base fit: not stated
- Model number: FT1500; UPC 008925160182
The FT1500 is Freud’s entry in this category, sold as an inlay template guide set with the router bit included, and the model has been on the market under the same number for many years. Freud is primarily a cutting-tool maker, so the appeal is a guide set from the company that grinds the bit. The honest limitation is documentation: the maker does not publish a full contents list or the key dimensions for this set, so the figures above are marked not stated rather than guessed. Anyone considering the FT1500 should confirm the current listing contents, bushing material, and base fit before ordering, and treat it as a choice for Freud loyalists who already make their own templates.
View it on Amazon: https://www.amazon.com/dp/B00004T7NA?tag=powertoolsdiy04-20
Rockler Nested Bow Tie Router Inlay Template Set
Specs:
- Maker: Rockler
- Kit contents: four nested bow tie templates (1 inch, 2 inch, 3 inch, and 4 inch), with screen-printed cross marks
- Template material: acrylic, 6mm thick, 4 inch by 6 inch outside dimensions
- Finished bow tie sizes: 0.47 by 1 inch, 0.97 by 2 inch, 1.47 by 3 inch, and 1.97 by 4 inch
- Guide bushing and bit: not included; made for the Rockler Bow Tie Inlay Starter Kit (frame, bushing with collar, 1/8 inch spiral up-cut bit), sold separately
- Maximum key thickness in the system: 3/8 inch, per the maker’s instructions
This set is the template half of Rockler’s bow tie inlay system rather than a bushing kit, and it only makes sense alongside the matching starter kit, which supplies the frame, the guide bushing with its removable collar, and the 1/8 inch spiral up-cut bit. It adds range: four bow tie sizes, usable singly or nested inside one another for a stepped effect, in 6mm acrylic with printed cross marks for centering on a crack. Buy it as an expansion to the Rockler system, not as a standalone kit.
View it on Amazon: https://www.amazon.com/dp/B0BFXPB1LJ?tag=powertoolsdiy04-20
How to Choose
Start with the geometry. Every true inlay kit works because the collar’s outside diameter is larger than the guide bushing’s diameter by exactly twice the bit diameter, so one template produces both halves of the joint. If a kit’s bit is replaced, the replacement must match the original diameter or the inlay comes out loose or oversized. Next, check the base fit: the Whiteside is specified for base plates and adapters with a 1-3/16 inch recessed hole, the POWERTEC uses a universal bushing that may still need an adapter plate, and the Milescraft replaces the base plate entirely with its own. Bushing material is the third check: solid brass rides smoothly against templates and resists wear that slowly changes a bushing’s diameter, while steel sets trade glide for hardness. Finally, confirm the basics: a plunge base is close to essential for controlled entry, most of these kits are built around 1/4 inch thick templates, and a centering pin lets the bushing be aligned to the spindle.
Who Should Skip
Skip this whole category if your inlay work is headed for a CNC router, since the machine needs no bushing at all. Skip it for a single small repair: a chisel and a shop-made patch finish faster. Skip the small-bit kits if your designs need wide curves cleared quickly, because a 1/8 inch bit removes material slowly and the matched collar sizes only work with that diameter. Also skip any kit whose base fit does not match your router and cannot be adapted; a bushing that sits even slightly off-center produces inlays that fit on one side and gap on the other.
FAQ
How does one template cut both the inlay and the recess?
The bushing rides against the template while the bit cuts inside it. With the collar or spacer fitted, the bit is held at one offset from the template edge; with it removed, the offset shrinks by exactly the bit’s diameter on each side. Those two passes produce a recess and an inlay piece whose edges mirror each other, which is why the pieces fit without a second template.
What thickness should my templates be?
The standard bushing kits here are designed around 1/4 inch template stock. The Rockler acrylic templates are 6mm, effectively the same working thickness. Much thinner stock lets the bushing drop too far; much thicker stock can leave the bushing with too little contact against the template edge.
Will a brass inlay kit fit my router?
It depends on the base. Kits that follow the common template-guide pattern fit routers and adapter plates with the standard recessed guide hole, and the Whiteside specifies a 1-3/16 inch recess. Compact routers and some plunge bases need an adapter plate, and the Milescraft avoids the question by supplying its own base plate.
Why do these kits all use such a small bit?
A 1/8 inch bit leaves a tight inside corner radius, which keeps small shapes, lettering, and bow ties crisp. The collar math also depends on it: the offset between the two passes equals the bit diameter, so the bushing and collar are ground as a matched set around that bit. Larger bits need larger matched bushings, which standard inlay kits do not include.
Final Verdict
For a woodworker who makes or buys templates and wants the classic two-pass method, the Whiteside 9500 remains the benchmark: solid brass, a centering pin in the box, and a matched 1/8 inch carbide bit. The POWERTEC 71333 is the closest like-for-like alternative, with the same layout and a longer bit cutter. Choose the Milescraft 1207 if ready-made patterns matter more than compatibility with shop-made templates, and add the Rockler nested templates if you already run the Rockler starter kit and need several bow tie sizes. The Freud FT1500 suits brand loyalists, provided the current listing contents are confirmed first.
Related guides
Read next
- Best CNC Router Bit Sets for Beginners: 5 Starter Kits
- Best Router Planes for Beginners: 5 Picks for Joinery
- Best Router Template Guide Bushings for Clean Cuts
- Best Hole Saw Kits for Wood, Plywood and Soft Materials
- Best Mortise Chisels for Timber Frames and Deep Mortises
- Best Hand Screw Clamps for Woodworking and Gluing Jobs
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!