Updated Nov 20, 2026· 10 min read

Key takeaways

  • The best router bit sets compared by shank size, piece count, carbide and case: Freud, Yonico, Bosch and LU&MN picks for beginner and mid-level shops.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is Freud 91-100 13-Piece Super Router Bit Set, with Yonico 17702 70-Piece Professional Router Bit Set as a strong alternative.

A router bit set is the first accessory purchase after the router itself, and it is an easy one to get wrong. Sets run from seven bits to seventy, they come on two shank sizes that are not interchangeable, and the headline piece count says nothing about carbide quality or whether the profiles inside match the work a home shop actually produces.

As an Amazon Associate, we earn from qualifying purchases.

This guide compares five sets the way a buyer should: by piece count, shank size, the carbide claim the maker itself prints, case type, and the profiles in the box. One warning runs through every pick: the same model name often covers both a 1/4 inch and a 1/2 inch version. The ASIN for each set is the variant named in its specs, so confirm the variant on the listing before ordering.

This article contains affiliate links, and we may earn a commission if you buy through them, at no extra cost to you.

Contents
  1. Quick Answer
  2. Freud 91-100 13-Piece Super Router Bit Set
  3. Yonico 17702 70-Piece Professional Router Bit Set
  4. Freud 90-100 15-Piece Advanced Bit Set
  5. Bosch RBS015MBS 15-Piece Carbide-Tipped Router Bit Set
  6. LU&MN 24-Piece Carbide Tipped Router Bit Set (LM-RTFT4B)
  7. How to Choose
  8. Who Should Skip
  9. FAQ
  10. Final Verdict

Quick Answer

If you buy one set, buy the Freud 91-100. Its 13 bits sit on 1/2 inch shanks, use Freud’s TiCo Hi-Density Carbide with the Perma-SHIELD coating, and cover straight cuts, grooves, a cove, an ogee and flush trimming in a shadow box. Trim router owners should look at the 1/4 inch Freud 90-100 instead.

Freud 91-100 13-Piece Super Router Bit Set

Freud 91-100 13-Piece Super Router Bit Set

Freud 91-100 13-Piece Super Router Bit Set

Check price on Amazon

The 91-100 is Freud’s quality-over-quantity answer: thirteen bits on 1/2 inch shanks, for shops that would rather own fewer cutters with better carbide than a wall of profiles they never mount. This set uses Freud’s TiCo Hi-Density Carbide with the red Perma-SHIELD non-stick coating that Freud says resists heat and pitch buildup.

The profile mix is the furniture maker’s core kit rather than a novelty assortment. Listing and maker data describe straight and mortising cutters for grooves and dadoes, a Roman ogee and a cove for shaped edges, a flush trim bit for template work, plus V-groove, chamfer and dovetail cutters, all in a shadow box case that can hang on a wall or sit on the bench.

The limits match the focus: no slot cutters, no beading variety, no raised panel cutter, and the 1/2 inch shanks shut out trim routers entirely. This set suits a full-size router or router table, bought by someone happy to add single bits later.

Specs:
– Pieces: 13
– Shank size: 1/2 inch
– Model: 91-100
– Carbide: TiCo Hi-Density Carbide, as stated by Freud
– Coating: Perma-SHIELD non-stick coating, as stated by Freud
– Case: Shadow box case, wall-hang or bench-mount
– Key profiles: straight, mortising, Roman ogee, cove, flush trim, V-groove, chamfer, dovetail
– Use: hand-held and table-mounted routers, per Freud

See it on Amazon: https://www.amazon.com/dp/B0000225YX?tag=powertoolsdiy04-20

Yonico 17702 70-Piece Professional Router Bit Set

Yonico 17702 70-Piece Professional Router Bit Set

Yonico 17702 70-Piece Professional Router Bit Set

Check price on Amazon

At the opposite end of the philosophy sits the Yonico 17702: seventy carbide cutters on 1/2 inch shanks in a wooden storage case, sold by Precision Bits. Yonico states that its bits use C3 micro-grain tungsten carbide, and the sheer spread is the point: a profile library for trying a shape today rather than ordering a single bit and waiting.

The maker’s own breakdown groups the set into joinery bits and edge design bits. The joinery side includes slot cutters in more than one width and a dovetail bit, while the edge side runs to Roman ogee, bullnose bead, triple bead, cove and roundover profiles in several sizes, plus core box and straight bits. Expect many of the seventy to sit untouched for years; treat the 17702 as a discovery set, then replace the few bits you wear out with premium singles.

Specs:
– Pieces: 70
– Shank size: 1/2 inch
– Model: 17702
– Carbide: C3 micro-grain tungsten carbide, as stated by Yonico
– Case: Wooden storage case
– Key profiles: slot cutters, dovetail, Roman ogee, bullnose bead, triple bead, cove, roundover, core box, straight

See it on Amazon: https://www.amazon.com/dp/B00KZM2Z6A?tag=powertoolsdiy04-20

Freud 90-100 15-Piece Advanced Bit Set

Freud 90-100 15-Piece Advanced Bit Set

Freud 90-100 15-Piece Advanced Bit Set

Check price on Amazon

The 90-100 is the Freud set built for the routers the 91-100 cannot serve: all fifteen bits ride on 1/4 inch shanks, so it fits trim and palm routers as well as full-size machines with a 1/4 inch collet. It is the natural first Freud set for a compact-router shop.

Freud lists the same family traits as its bigger sets: TiCo carbide with the Perma-SHIELD coating, in solid carbide or carbide tipped form depending on the cutter, and a shadow box case. The listing describes the mix as covering rounding over, V-groove, chamfering, flush trim and dovetail work, a sensible spread for edge treatment and light joinery on smaller machines.

Keep expectations matched to the shank. A 1/4 inch shank has a quarter of the cross-section of a 1/2 inch shank, so these bits suit lighter passes and smaller profiles; deep cuts belong on a bigger router. Within that envelope, the 90-100 gives trim router owners a name-brand carbide upgrade over generic assortments.

Specs:
– Pieces: 15
– Shank size: 1/4 inch
– Model: 90-100
– Carbide: TiCo carbide, solid carbide or carbide tipped by bit, as stated by Freud
– Coating: Perma-SHIELD coating, as stated by Freud
– Case: Shadow box case
– Key profiles: rounding over, V-groove, chamfer, flush trim, dovetail

See it on Amazon: https://www.amazon.com/dp/B00002260I?tag=powertoolsdiy04-20

Bosch RBS015MBS 15-Piece Carbide-Tipped Router Bit Set

Bosch RBS015MBS 15-Piece Carbide-Tipped Router Bit Set

Bosch RBS015MBS 15-Piece Carbide-Tipped Router Bit Set

Check price on Amazon

Bosch’s RBS015MBS is a fifteen-bit, 1/4 inch shank set from the maker whose routers many buyers pair them with. The bits are carbide tipped, sit in a clear plastic storage case, and Bosch’s manual positions the set for softwood, hardwood and wood composites.

The contents list in the Bosch manual is refreshingly specific for a mid-size set. It names a chamfer bit, a dovetail bit, a V-groove bit, a slotting cutter, a rabbeting bit, a top bearing straight trim bit, a double flute flush laminate trim bit, a Roman ogee, a cove bit, a roundover bit and double-flute straight bits: eleven distinct jobs in a fifteen-bit box.

What Bosch does not do for this set is publish a carbide grade, so the specs below record that as not stated rather than borrowing a grade from Bosch’s professional lines. Buyers who care about a named carbide specification should compare the Freud and Yonico sets above.

Specs:
– Pieces: 15
– Shank size: 1/4 inch
– Model: RBS015MBS
– Cutter material: Carbide-tipped, as stated by Bosch
– Carbide grade: not stated
– Case: Plastic storage case
– Key profiles: chamfer, dovetail, V-groove, slotting cutter, rabbeting, top bearing straight trim, flush laminate trim, Roman ogee, cove, roundover, straight

See it on Amazon: https://www.amazon.com/dp/B0B71S7YTM?tag=powertoolsdiy04-20

LU&MN 24-Piece Carbide Tipped Router Bit Set (LM-RTFT4B)

The LU&MN set, sold by LU&MA Tools, is the budget way into a broad 1/4 inch assortment: twenty-four tungsten carbide tipped bits in an indexed aluminium storage box. For a first router or a hobby shop, it covers the standard first-year jobs without a premium brand’s ticket.

The listing itemises the useful end of the box rather than padding it with near-duplicates. It names round over bits in three radii, cove bits in two radii, a Roman ogee, a 45-degree chamfer bit, a slot cutter, a rabbeting bit, a panel pilot bit and straight bits.

Two cautions belong with the low cost. The listing does not state a carbide grade, so edge life claims rest on the tungsten carbide tipped description alone, and the same listing page shows other set sizes, so confirm the 24-piece size is selected before checkout.

Specs:
– Pieces: 24
– Shank size: 1/4 inch
– Model: LM-RTFT4B
– Cutter material: Tungsten carbide tipped, as stated in the listing
– Carbide grade: not stated
– Case: Aluminium storage box, per listing
– Key profiles: round over in three radii, cove in two radii, Roman ogee, 45-degree chamfer, slot cutter, rabbeting, panel pilot, straight

See it on Amazon: https://www.amazon.com/dp/B0797T48MQ?tag=powertoolsdiy04-20

How to Choose

Start with the collet, not the catalogue. Trim and palm routers accept only 1/4 inch shanks, while most full-size routers ship with both collets. A 1/2 inch shank is stiffer, runs with less flex and suits wide cutters and router table work; a 1/4 inch shank is the only option on compact routers.

Next, count profiles you will really cut. Most shops live on a straight bit, a roundover, a chamfer, a flush trim and one decorative edge profile. A focused set covers that core with better carbide, while a 70-piece set trades per-bit quality for breadth.

Read carbide claims as maker statements. Freud names its TiCo Hi-Density Carbide and Yonico states C3 micro-grain tungsten carbide; Bosch and LU&MN describe their cutters as carbide tipped without a grade for these sets. A stated grade is one comparison point, not a guarantee.

Finally, check the case and the variant. A proper case protects the edges, and because these models are sold in both shank sizes and several piece counts, confirm the exact shank and count selected on the listing before you order.

Who Should Skip

Skip the 1/2 inch sets if your only router is a trim or palm model, since the bits will not fit its collet; the 1/4 inch sets in this guide exist for those machines. Skip boxed sets altogether if your work is mostly CNC routing, because these assortments suit hand-held and table work, not CNC toolpaths.

Production shops and daily professional users should look past the budget entries and buy individual premium bits in the profiles they run, since per-bit carbide quality matters more at that volume. If your next projects need large raised panel cutters or specialised joinery systems, buy those as dedicated bits instead.

FAQ

Should a beginner buy a 1/4 inch or 1/2 inch shank set?

Match the set to the router you own. A trim router takes only 1/4 inch shanks, so its owner has no choice to make. With a full-size router that accepts both, a 1/2 inch set is the stiffer, smoother-running option for most work.

Is a 70-piece set better than a 13-piece set?

Not automatically. A large set like the Yonico 17702 offers far more profiles to try, which helps a shop learn what it uses. A small set like the Freud 91-100 puts its cost into fewer bits with named carbide and coating. Most woodworkers end up using a handful of profiles either way.

Can I use a 1/2 inch shank bit in a 1/4 inch collet?

No. The shank must match the collet size exactly, and no safe adapter makes a larger shank fit a smaller collet. The reverse is different: many full-size routers accept a 1/4 inch collet, which is why 1/4 inch sets remain useful in bigger shops.

How do I keep a set cutting well?

Store bits in their case so carbide edges never knock together, brush off pitch and resin after use, and take lighter passes instead of forcing a dull bit through hardwood. Carbide edges can be touched up on their flat faces with a fine diamond stone, but chipped cutters should be replaced or professionally reground.

Final Verdict

For a full-size router, the Freud 91-100 is the set to build a shop around: thirteen relevant profiles, 1/2 inch shanks and Freud’s stated TiCo carbide in a proper shadow box. The Yonico 17702 is the better buy when breadth matters more than per-bit pedigree. On 1/4 inch machines, the Freud 90-100 leads, Bosch’s RBS015MBS offers a documented contents list from a major brand, and the LU&MN set is the low-cost way to learn which profiles earn a premium replacement.

F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Router Bit Sets for Beginner and Mid-Level…Check price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.