Key takeaways
- Five trammel point sets compared for scribing large circles and arcs, from a stainless steel classic to compact cast iron heads for shop-made beams.
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Buying Guides › Best Trammel Points: 5 Beam Compass Sets for Layout
A standard compass runs out of reach quickly, and that limit shows up the moment a project calls for a wide tabletop round, a curved apron, or a full-size arch layout. Trammel points solve the problem by clamping two movable heads onto a beam you supply, so the radius is set by the beam length rather than by the tool. One head carries the center point, the other carries a scriber or a pencil, and the pair swings an arc of almost any size.
The five sets below cover the main buying paths: a traditional stainless steel set with replaceable points, two cast-metal head sets in large and compact sizes, a lightweight composite set for occasional layout, and a heavy-duty welding-pattern set for metal and pipe work. Each one mounts on a shop-made wooden beam, and each is described from its published specifications so you can match head size, beam fit, and point style to your own work.
As an Amazon Associate, we earn from qualifying purchases.
Contents
Quick answer
For most woodworkers, the Taytools 468310 large head set is the pick to beat: cast zinc heads, removable pencil holders and hardened points that scribe wood and metal alike. The General Tools 523 is the traditional stainless steel choice, while the Taytools 468303 compact set suits thinner shop-made beams and smaller work.
The five sets
General Tools 523 Trammel Set
The 523 is the long-running classic in this group, built from stainless steel with two trammel heads and a pair of 6-inch scriber points. Its defining feature is flexibility at the point: the steel points adjust for reach and can be swapped for a pencil, pen, crayon, or soapstone, so the same set moves between fine wood layout and rough marking on sheet goods or metal. Heavy-duty clamps grip beams from 5/8 inch to 1-1/2 inches wide, which covers the 1x and 2x stock most shops already have on hand. A 1/4-inch scribe rod is part of the design, and the stainless construction shrugs off the moisture and dust of a working shop. Choose this set if you want one traditional tool that handles both point scribing and pencil work without a second purchase. It sits in the premium tier of this roundup, and it earns that place on material and point versatility rather than on extras in the box.
Specs
- Material: stainless steel
- Contents: two trammel heads, two 6-inch scriber points
- Point options: steel points, replaceable with pencil, pen, crayon, or soapstone
- Beam fit: clamps beams 5/8 inch to 1-1/2 inches wide
- Scribe rod: 1/4 inch
Taytools 468310 Large Adjustable Trammel Head Set
The 468310 is the mid-range main pick for general shop use. Its two heads are cast zinc, a dense alloy that keeps the heads rigid on the beam without the weight of cast iron, and both heads carry removable pencil holders alongside the scribing points. The points are hardened and ground sharp, and Taytools rates the set for scribing wood, steel, sheet metal, and aluminum, so it covers layout on the materials a mixed shop handles most. Because the points lift out and a pencil drops in, changeover between a scribed line on metal and a visible pencil line on pale timber takes seconds. The large head format suits full-size furniture and architectural curves, where a longer head body gives a steadier grip while swinging a wide arc. If you buy one set for everyday layout across wood and light metal, this is the balanced choice.
Specs
- Head material: cast zinc
- Contents: two trammel heads, removable pencil holders, hardened points
- Points: hardened steel, ground sharp, removable
- Work materials: wood, steel, sheet metal, aluminum
- Model: Taytools 468310
Taytools 468303 Compact Adjustable Trammel Head Set
The 468303 is the compact sibling in the Taytools line, built around cast iron heads sized for thinner beams and smaller work. It clamps wood beams from 3/8 inch to 1-1/4 inches wide, so it pairs well with the slim strips and offcuts that compact sets are usually mounted on. The hardened points and a pencil holder follow the same layout as the larger set, giving you a steel point for scribing and a pencil option for visible lines. At 5.7 ounces for the set, it rides in a toolbox or apron pocket without complaint, which makes it a sensible second set for site work or a first set for a small bench. The trade-off is reach and mass: on very wide arcs the lighter heads need a steadier hand. As the budget pick of the two Taytools sets, it covers small-to-medium radii well and leaves the heavy work to its larger sibling.
Specs
- Head material: cast iron
- Beam fit: clamps wood beams 3/8 inch to 1-1/4 inches wide
- Points: hardened steel points, pencil holder included
- Weight: 5.7 ounces
- Model: Taytools 468303
Blue Fox Tools Compass Trammel Head Set
The Blue Fox set is the lightweight option in this group, with two adjustable heads in a composite housing, pencil holders, and hardened steel points. The composite body keeps the set light and keeps it in the budget tier, and for occasional layout work — a round tabletop now and then, a garden arch, a one-off template — that is often the right balance. The heads adjust along the beam and lock down for repeatable radii, and the pencil holders mean you can work in pencil on finished surfaces where a scribed line would be too aggressive. Blue Fox describes the set for precision marking in woodworking and general project work, which matches its intended role: a capable occasional-use set rather than a daily bench tool. If your layout work is infrequent and you would rather put the savings toward materials, this set covers the fundamentals honestly.
Specs
- Housing: composite
- Contents: two adjustable trammel heads, pencil holders
- Points: hardened steel
- Intended use: precision marking for woodworking and project layout
- Format: beam compass head set, beam supplied by the user
Jackson Safety Multi-Trammel Heads (14785)
The Jackson Safety set comes from the welding and pipefitting world, and it is the heavy-duty outlier here. Its heads feature radius set points cast in alignment with the marking pointer, so the radius you set is the radius you scribe, and the backs are squared for perpendicular alignment against a pipe or bar. The stationary head holds a 1/4-inch case-hardened center point, and the heads fasten with 1/4-inch screws. In the box you get an Allen wrench, a soapstone, and a scribe, which tells you the intended work: laying out circles and distances on pipe and plate, where dividers cannot reach. For a woodworking shop that also fabricates in metal, this set doubles as a pipe-layout tool. It is overbuilt for timber alone, and it sits in the premium tier, but for metal layout nothing else in this roundup matches its alignment features.
Specs
- Contents: two trammel heads, Allen wrench, soapstone, scribe
- Alignment: radius set points cast in line with the marking pointer, squared backs
- Center point: 1/4-inch case-hardened, held by the stationary head
- Fasteners: 1/4-inch screws
- Model: Jackson Safety 14785
How to choose
Begin with beam fit, because every set here is only as good as the beam it rides on. Measure the stock you actually plan to use: compact heads like the Taytools 468303 clamp beams from 3/8 inch to 1-1/4 inches wide, while the General Tools 523 takes beams up to 1-1/2 inches wide. A straight, dry strip of hardwood with parallel edges is the traditional choice, and longer beams want a stiffer section so the middle does not flex mid-arc.
Next, match the point style to your material. Hardened steel points scribe a fine, permanent line in wood and are the only sensible choice on metal. Pencil holders earn their place on pale timber, veneered panels, and any surface where a scribed groove would show in the finished piece. Sets with removable points, like the 523 and the 468310, let you swap between the two without owning two tools.
Head material sets the feel of the tool. Cast iron and cast zinc heads stay planted and resist drifting as you swing a wide arc, which matters most at large radii. Composite heads are lighter and fine for occasional work, but they reward a slower, more deliberate swing. Finally, consider the work itself: pipe and plate layout benefits from the squared backs and cast-in alignment points of the Jackson Safety heads, while furniture work is better served by the pencil-friendly wood-shop sets.
Who should skip
Skip trammel points entirely if your circles are small. A wing divider or a standard compass is faster and more accurate below roughly a foot in diameter, and a circle-cutting jig on the router or band saw beats any marking tool when the cut itself needs guiding. Also skip these sets if you need a beam in the box: every set here is heads only, and the beam is a shop-made part you supply yourself. If you want a complete tool with its own rail and scale, look at a beam compass kit with an included bar instead. And if your layout is mostly on pipe, the wood-shop sets will frustrate you; go straight to the Jackson Safety heads.
FAQ
Do trammel point sets include a beam?
No. All five sets here are heads only, and that is the long-standing pattern for this tool type. A straight strip of hardwood or a length of 1x stock is the usual beam, cut to whatever length your largest layout needs.
How large a circle can a trammel set draw?
As large as your beam allows. The heads set the radius, so a longer beam means a larger circle; in practice the limit is a beam stiff enough to stay straight and a shop floor or bench big enough to swing it.
Can trammel points scribe metal as well as wood?
Yes, with the steel points fitted. The Taytools 468310 is rated by its maker for wood, steel, sheet metal, and aluminum, and the General Tools 523 accepts soapstone for marking metal. Use a pencil instead when the line must sit on the surface without cutting in.
What beam width should I choose?
Match the beam to the heads. The compact Taytools 468303 fits beams 3/8 inch to 1-1/4 inches wide, and the General Tools 523 fits 5/8 inch to 1-1/2 inches. Keep the edges parallel and the stock dry so the heads clamp evenly along the full length.
Final verdict
For a single set that covers most shop layout, the Taytools 468310 is the balanced buy: rigid cast zinc heads, hardened points, and pencil holders in a mid-range package. The General Tools 523 remains the premium traditional choice for buyers who value stainless steel and the widest point-swapping flexibility. The Taytools 468303 is the budget-friendly compact for thin beams and smaller work, the Blue Fox set serves occasional layout at the lowest commitment, and the Jackson Safety heads stand apart for pipe and plate. Match the head to your beam stock and your material, and any of the five will lay out circles far beyond a compass.
Product and ASIN Reference
| Product | ASIN |
|---|---|
| General Tools 523 Trammel Set | B00004T7R5 |
| Taytools 468310 Large Adjustable Trammel Head Set | B07GWDS4Q8 |
| Taytools 468303 Compact Adjustable Trammel Head Set | B07GW9Y4MR |
| Blue Fox Tools Compass Trammel Head Set | B0DV5H8VCN |
| Jackson Safety Multi-Trammel Heads 14785 | B002FCTOIK |
Related guides
Read next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!