Key takeaways
- Compare the best scratch awls for woodworking by blade length, tip style, handle material and steel type, with five real picks for layout and marking.
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Scratch Awls and Marking Awls for Woodworkers
- Top Pick: General Tools 818 Hardwood Handle Scratch Awl
- Runner-up: Narex Square Blade Birdcage Woodworking Scratch Awl 874710
- Also consider: DASCO PRO 431-0 Scratch Awl, 7 Inch
A scratch awl does two jobs a pencil does badly: it scores a knife-like line along a straightedge that a saw or chisel can register against, and it pricks a precise dimple that keeps a drill bit or screw from wandering at the start. The differences between models come down to a short list of published details: blade length, tip style (a plain round scratch point or a square birdcage blade with cutting edges), handle material, and stated steel type.
As an Amazon Associate, we earn from qualifying purchases.
This roundup compares five scratch awls using only the specifications their makers publish, so you can match the tool to the work. Layout in softwood, starter holes in hardwood, and general bench marking each reward a slightly different mix of blade length, tip style, and handle shape, and the gaps matter too: where a maker states no blade length or steel grade, the specs below say so rather than guessing.
This article contains affiliate links, and we may earn a commission if you buy through them, at no extra cost to you.
Quick Answer
For most benches, the General Tools 818 is the scratch awl to buy first: an alloy steel blade that runs through a fluted hardwood handle, a true round scratch point, and a 6-1/2 inch overall length that suits layout work. Choose the Narex birdcage awl instead when you mainly need deep, clean starter holes for screws in hardwood.
General Tools 818 Hardwood Handle Scratch Awl
The 818 is the classic American layout awl. Its alloy steel blade runs the full length of the handle and is fastened at both ends, to the plated steel ferrule at the front and a steel cap at the back, so the point cannot work loose the way a short-tang awl eventually can. The hardwood handle is contoured and fluted, so your fingers find the same grip every time you pull the point along a straightedge.
General Tools positions the 818 for scribing, layout work, piercing wood, and starting screw holes, exactly the mix a general bench awl should cover. The maker publishes overall length only, with no separate blade length, so judge it on its through-tang build rather than an exposed-blade figure. For a first awl, this is the default recommendation.
Specs:
– Blade length: not stated
– Overall length: 6-1/2 in
– Tip style: round scratch point
– Blade material: alloy steel, through-tang, fastened to plated steel ferrule and cap
– Handle material: fluted, contoured hardwood
– Maker-stated uses: scribing, layout, piercing wood, starting screw holes
See it on Amazon: https://www.amazon.com/dp/B00004T7R3?tag=powertoolsdiy04-20
Narex Square Blade Birdcage Woodworking Scratch Awl 874710
The Narex 874710 is a different kind of awl, and it justifies the birdcage half of this comparison. Instead of a round spike, its blade is square in cross-section, and the four edges where the sides meet act as cutters. Pushed into wood and given a slight twist, the square blade reams a clean, round starter hole rather than displacing fibers, which is why birdcage awls are the traditional choice for starting screws in hardwood without splitting.
The published dimensions are compact: a 3-1/2 inch blade ahead of a 2-1/2 inch stained beech handle with a steel ferrule, made in the Czech Republic. The blade is high-carbon tool steel; retailers of the Narex Wood Line describe it as a chrome-manganese alloy with a black surface treatment. The trade-off is marking: a square blade can scribe, but a fine round point tracks a straightedge more cleanly, so this awl is the hole-starting specialist alongside a plain scratch awl, not a replacement for one.
Specs:
– Blade length: 3-1/2 in
– Handle length: 2-1/2 in
– Tip style: square birdcage blade with cutting edges
– Blade material: high-carbon tool steel, black surface treatment
– Handle material: stained beech wood with steel ferrule
– Origin: Czech Republic
See it on Amazon: https://www.amazon.com/dp/B00IXVQMPU?tag=powertoolsdiy04-20
DASCO PRO 431-0 Scratch Awl, 7 Inch
DASCO PRO builds struck tools, and its scratch awl follows the same one-piece philosophy: the whole 7 inch tool is a single drop forging, so there is no handle to split and no ferrule to loosen. The listing’s material field states high carbon steel, and the grip section is knurled, giving the forged shaft enough texture to control when you press and twist a starter hole into place.
That construction suits woodworkers who treat an awl as a rough-and-ready tool for marking, scribing, and starting holes in wood, metal, and leather, and who value durability over a shaped wooden grip. The compromises are real: a slim steel shaft is less comfortable than a palm-filling handle during long layout sessions, and because the tool is one piece, the maker publishes overall length only, with no separate blade length. DASCO PRO notes the awl is assembled in the USA, and the brand sits inside the Marshalltown family.
Specs:
– Blade length: not stated
– Overall length: 7 in (178 mm)
– Tip style: round scratch point
– Blade material: high carbon steel, one-piece drop-forged construction
– Handle material: none; one-piece forged steel with knurled grip
– Model numbers: 431-0 (VN74310)
– Origin: assembled in the USA
See it on Amazon: https://www.amazon.com/dp/B0000BYBBM?tag=powertoolsdiy04-20
Malco A2 Large Grip Scratch Awl
Malco is a sheet-metal trade brand, and the A2 appears in its catalogs year after year with unusually complete dimensions for an awl. The catalog lists a 1/4 inch blade diameter, a 4 inch blade, and a 6-1/4 inch overall length, so the A2 carries one of the longer published blades here, useful when you want the point to reach across a wide straightedge or into a recess while your hand stays clear of the work.
The handle is the large-grip version in Malco’s line; the catalog states neither the grip material nor a steel grade for the blade, so both are recorded here as not stated rather than assumed. What the format promises is control: a bigger grip on a long, stout blade is the combination tradespeople pick for repetitive marking, and woodworkers who find slim awl handles cramp their hands will appreciate the same geometry. Malco’s figures, notably, come from its own catalog, which is more data than most awl makers provide.
Specs:
– Blade length: 4 in (102 mm)
– Blade diameter: 1/4 in (6.4 mm)
– Overall length: 6-1/4 in (159 mm)
– Tip style: round scratch point
– Blade material: not stated
– Handle material: not stated (large grip handle)
– Maker: Malco Products
See it on Amazon: https://www.amazon.com/dp/B008FM350C?tag=powertoolsdiy04-20
QHAJRYYC Wooden Handle Scratch Awl, 2-Pack
The fifth pick covers the fine end of the marking spectrum. This two-pack pairs a slender stainless steel needle with a polished wooden handle, a format sold for leather and cloth marking that also suits delicate tasks: transferring pattern points, marking veneer, and pricking shallow guide points in soft stock where a heavy bench awl would tear more fiber than it parts. Two in the pack means one lives at the bench and one in a toolbox or apron pocket.
Be clear about what this listing does not give you. The seller states the materials, stainless steel and wood, plus a part number, but publishes no blade length at all, describing size only as shown in its pictures, so that field is not stated here. The fine needle point is genuinely slender, closer to a sewing awl than to the forged tools above, and it is the wrong choice for starting screw holes in hardwood or any job where you lean your weight into the tool. As a light-duty precision marker, though, it fills a niche the other four do not.
Specs:
– Blade length: not stated
– Tip style: fine round point
– Blade material: stainless steel
– Handle material: polished wood
– Pack contents: 2 awls
– Part number: 61790
See it on Amazon: https://www.amazon.com/dp/B0DH8MVZV4?tag=powertoolsdiy04-20
How to Choose
Start with tip style, because it decides what the tool does to the wood. A round scratch point is a marking tool first: drawn along a straightedge it scores a fine line, and pressed straight down it leaves a locating dimple. A square birdcage blade is a hole-making tool first: its edges cut as you twist, producing a starter hole that guides a screw or small bit. Most benches eventually want both behaviors, which is why the General Tools and Narex pairing covers so much ground.
Blade length is the second filter, and maker data gets thin here. Only the Narex and the Malco publish a true blade length, 3-1/2 and 4 inches respectively; the others publish overall length or nothing. A longer blade keeps knuckles clear of wide rules and deep stock; a shorter one gives finer control. Handle material is the third filter: fluted hardwood and beech fill the palm, a knurled one-piece forging trades comfort for indestructibility, and a large grip suits bigger hands. Finally, weigh stated steel honestly: alloy steel and high-carbon tool steel are both proven awl materials, and when a maker states no grade, as with the Malco and the QHAJRYYC, judge the tool on dimensions and construction instead.
Who Should Skip
Skip this category if your layout work is already covered by a marking knife and a bradawl you like, because a scratch awl overlaps both and adds little. Skip the birdcage design if you never start screws by hand, since its square blade is the weakest pure marker here. Skip the one-piece forged DASCO if slim steel shafts tire your hand during long layout sessions. Skip the fine two-pack if your marking involves hardwood starter holes or mallet work, because a slender needle point is built for neither. And skip any awl if you need repeatable hole depth or diameter; that is a drill press job.
FAQ
What is the difference between a scratch awl and a birdcage awl?
A scratch awl has a round blade ground to a point and is made for scribing lines and pricking center marks. A birdcage awl, such as the Narex 874710, has a square blade whose edges cut when twisted, so it bores a small, clean starter hole instead of just denting the surface.
How long should a scratch awl blade be?
For general bench work, a blade around 3-1/2 to 4 inches balances reach and control, which is where the Narex and Malco sit. Shorter blades feel precise for close marking, and longer tools like the 7 inch DASCO keep your hand away from the work at the cost of some finesse.
Can a scratch awl start screw holes, or do I need a drill?
An awl starts screw holes well in softwood and adequately in hardwood when the blade cuts, as a birdcage blade does, because the hole only needs to guide the screw’s first threads. For deep pilots, hard maple, or anything structural, drill the pilot properly and use the awl for marking out instead. Keep the point sharp on a fine stone, rotating the blade as you work so the point stays centered.
Final Verdict
Buy the General Tools 818 first if you want one awl for everyday layout: through-tang alloy steel, a fluted hardwood handle, and a proper round point. Add the Narex birdcage awl when hand-started screws in hardwood become routine, reach for the DASCO PRO when durability outranks comfort, pick the Malco A2 for its long blade and large grip, and keep the QHAJRYYC pair for fine, light marking. Match the tip to the task, and any of these five earns its drawer space.
Related guides
Read next
- Best Speed Squares for Layout, Roofing and Shop Marking
- Best Drill Bit Sets for Woodworkers and Home Shops
- Best Marking Gauges for Dovetails: 5 Wheel Gauges Compared
- Best Marking Knives for Dovetails: 5 Thin-Blade Picks
- Best Nail Set Punches for Trim and Finish Carpentry
- Best Hand Drills and Eggbeater Drills for Woodworking
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!