Our Top Picks
BORA Universal Mobile Base for Shop Equipment and18.81 x 6.14 x 3.85 inches12.9 poundsCheck on Amazon
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Planer Stands and Rolling Bases for Small Shops
- Top Pick: DEWALT Planer Stand with Integrated Mobile Base (DW7350)
- Runner-up: Eastrexon Planer Stand with Adjustable Height
- Also consider: POWERTEC Universal Tool Stand (UT1002)
The best planer stand for most benchtop thickness planers is a purpose-built mobile stand like the DEWALT DW7350, because it combines a pre-drilled top, a storage shelf, and a foot-pedal mobile base rated for 300 pounds in one frame. Shops that already own a sturdy bench can instead use a low-profile rolling base, such as the HTC-2000 or the Bora Portamate PM-1000, which slides under the planer or under a shop cabinet and adds almost no working height. Between those formats sit adjustable-height rolling stands and simple stationary universal stands, and the right choice depends on footprint, combined weight, and how often the machine moves.
As an Amazon Associate, we earn from qualifying purchases.
A thickness planer is one of the heaviest benchtop tools in a small shop, and it vibrates and throws a heavy stream of chips while it works. Parking it on a wobbling folding table, or lifting it on and off a bench for every session, gets old quickly, and an unsteady stand can contribute to snipe and uneven feeding. A dedicated stand fixes the working height, gives the dust hose a clear path, and, in mobile versions, lets one person roll the planer out for long boards and tuck it away afterward. This guide compares five stands and rolling bases using published specifications only, so capacities and top sizes can be checked against a planer footprint before ordering.
Contents
Table of Contents
- Quick Picks
- DEWALT Planer Stand with Integrated Mobile Base (DW7350)
- Eastrexon Planer Stand with Adjustable Height
- POWERTEC Universal Tool Stand (UT1002)
- HTC-2000 Adjustable Mobile Base
- Bora Portamate PM-1000 Universal Mobile Base
- How to Choose a Planer Stand or Rolling Base
- FAQ
- Conclusion
- Product and ASIN Reference
Quick Picks
- Best dedicated planer stand: DEWALT DW7350 — planer-specific stand with an MDF top, a lower shelf, and an integrated mobile base on a foot pedal.
- Best adjustable-height rolling stand: Eastrexon Planer Stand — steel rolling table with a large top, four casters, storage, and a wide height range.
- Best stationary budget stand: POWERTEC UT1002 — fixed universal stand with a split MDF top that expands for wider tools.
- Best rolling base for a planer on a cabinet: HTC-2000 — heavy-duty adjustable base that adds less than an inch of height.
- Best compact mobile base kit: Bora Portamate PM-1000 — light, adjustable frame for moving a planer in tight shops.
DEWALT Planer Stand with Integrated Mobile Base (DW7350)
The DEWALT DW7350 is the only pick here designed from the start as a thickness planer stand rather than adapted from another tool category. The MDF top is sized for benchtop planers and pre-drilled for DEWALT DW733, DW734, and DW735 models, while the universal mounting arrangement accepts most competitive benchtop planers as well. A metal shelf below the top stores spare knives and accessories.
Mobility is built into the frame instead of bolted on. The integrated mobile base raises the stand onto its wheels with a foot pedal, then lowers it back onto its feet for planing, so the stand sits planted during a cut. With a published capacity of 300 pounds, the frame covers any common 12.5-inch or 13-inch benchtop planer with a wide margin, and the roughly 30-inch working height puts the bed at a comfortable feeding level. This premium-tier option suits a shop that wants one stand that stays with the planer.
Specs:
- Model: DEWALT DW7350
- Overall size: 24 x 22 x 30 inches
- Load capacity: 300 pounds
- Top: MDF top, pre-drilled for DEWALT DW733, DW734, and DW735 planers
- Included components: mobile base, stand, hardware, MDF top, and shelf
- Mobility: integrated mobile base with foot pedal that raises and lowers the wheels
Eastrexon Planer Stand with Adjustable Height
The Eastrexon planer stand is a rolling steel work table whose height adjusts from 31 inches up to 44.7 inches, letting the same stand serve at a low feeding height or double as a tall surface. The tabletop measures 27.6 x 24 inches, larger than the tops on the dedicated planer stands here, so it fits wider benchtop machines and leaves room for boards waiting to be milled.
Four casters make the stand fully mobile, and the frame includes storage space below the top. The published load capacity is 550 pounds, the highest of any stand-format pick here, suiting heavier 13-inch planers. The top is not pre-drilled for any specific planer, so mounting means drilling the top or bolting the machine to a sub-base first. This is a mid-range option for shops that value height adjustment over brand-specific fit.
Specs:
- Model: Eastrexon Planer Stand
- Tabletop: 27.6 x 24 inches
- Height adjustment: 31 to 44.7 inches
- Load capacity: 550 pounds
- Mobility: four casters for rolling repositioning
- Storage: built-in storage space below the top
- Intended tools: planers, saws, and other benchtop machines
POWERTEC Universal Tool Stand (UT1002)
The POWERTEC UT1002 is a stationary universal stand, earning its place for shops where the planer has a permanent home and never needs to roll. Its split MDF top expands from 14 x 25 inches to 20 x 25 inches, so the stand can be set narrow for a compact planer or opened up for a wider machine, and the split design also accommodates tools that need clearance through the middle of the top. The working height is about 32 inches, and the published load capacity is 500 pounds, well above a benchtop planer plus feeding pressure.
One honest limitation comes straight from the manufacturer manual: the UT1002 is not designed for casters, and adding casters voids the warranty, because the leg geometry is meant to sit flat and planted. That makes it the wrong pick for a planer that must move weekly, but a sensible budget-tier pick for a dedicated milling corner where stability matters more than mobility. At 24 pounds, the stand is light enough to reposition empty when the layout changes.
Specs:
- Model: POWERTEC UT1002
- Load capacity: 500 pounds
- Working height: 32-1/8 inches with the wood top fitted
- Top: split MDF top, expands from 14 x 25 inches to 20 x 25 inches
- Weight: 24 pounds
- Mobility: stationary legs; the manufacturer states the stand is not designed for casters
- Intended tools: planers, drill presses, sanders, and bench grinders
HTC-2000 Adjustable Mobile Base
The HTC-2000 is not a stand at all; it is a rolling base that goes under a planer that already sits on a bench, a cabinet, or a shop-built stand, and it is the heavy-duty option in that format. The steel rail frame expands from 12 x 12 inches to 34 x 34 inches square, or to an 18 x 50 inch rectangle, in 1-inch increments, so it can be sized to a planer footprint or to a cabinet-style planer station. The published capacity is 500 pounds, covering a heavy planer plus the cabinet under it in many setups.
Three-inch heavy-duty rubber caster wheels carry the load, and foot-operated levers raise the base for moving and drop it back down so the machine rests close to the floor. The low-profile design increases machine height by less than 1 inch, which matters when a planer already sits at a comfortable bench height. This mid-range base suits a woodworker who built a good stationary station and wants it to move for cleaning, hose routing, or long-board clearance. Measure the cabinet footprint rather than the planer footprint when sizing it.
Specs:
- Model: HTC-2000 (HTC2000)
- Load capacity: 500 pounds
- Adjustment range: 12 x 12 inches to 34 x 34 inches square, or up to 18 x 50 inches rectangular
- Adjustment increments: 1 inch
- Wheels: 3-inch heavy-duty rubber caster wheels
- Height added: less than 1 inch
- Construction: heavy-duty steel rails
Bora Portamate PM-1000 Universal Mobile Base
The Bora Portamate PM-1000 is the lightest rolling base in this guide, in the same under-tool format as the HTC-2000 with a smaller capacity and frame. It adjusts from 12 x 12 inches to 32 x 32 inches square, or up to a 17 x 48 inch rectangle, in 1-inch increments, and it is rated for 400 pounds. That is enough for a benchtop planer on a light stand, or for a planer bolted to a sheet of plywood used as a mounting board.
At 12.9 pounds, the PM-1000 is easy to assemble around a machine already in place, and its frame adds less than an inch of height. Foot-operated levers lift the base onto its casters for a move and lower it for work. Compared with the HTC-2000, the Bora gives up some capacity for a lighter frame, fitting occasional movers: a planer that rolls out for weekend milling and back into a corner afterward. For a very heavy planer on a solid cabinet, the HTC is the better match.
Specs:
- Model: Bora Portamate PM-1000
- Load capacity: 400 pounds
- Adjustment range: 12 x 12 inches to 32 x 32 inches square, or up to 17 x 48 inches rectangular
- Adjustment increments: 1 inch
- Weight: 12.9 pounds
- Height added: less than 1 inch
- Mobility: foot-operated levers raise and lower the base onto its casters
How to Choose a Planer Stand or Rolling Base
Start with the combined weight, not the planer weight alone. A 13-inch benchtop planer typically weighs between about 60 and 95 pounds, but the stand also carries the downward pressure of feeding stock, and a rolling base carries the cabinet or mounting board as well. Match the published capacity to the full stack, with a safety margin. Every pick here is rated at 300 pounds or more; lighter general-purpose tables rated near 100 pounds leave little margin.
Next, measure the footprint. For a stand, the planer base must sit fully on the top with room for mounting bolts; the tops here run from about 20 x 24 inches up to 27.6 x 24 inches. For a rolling base, measure the cabinet footprint the base carries, and confirm it falls inside the adjustment range without the rails at their extreme ends, where frames feel least rigid.
Then decide how the machine will move. A foot-pedal integrated base like the DEWALT lifts and lowers without reaching under the machine, suiting frequent moves. Frame-style bases like the HTC-2000 and PM-1000 keep the planer low and suit a planer already on a cabinet. A caster-mounted stand like the Eastrexon rolls in any direction, so its casters should be locked before planing, while a stationary stand like the POWERTEC UT1002 trades mobility for a planted stance.
Finally, check working height. Most planer stands put the bed near 29 to 32 inches, close to a typical workbench, which keeps infeed and outfeed supports easy to align. Adjustable-height stands help when the planer must line up with a fixed bench. Whichever format is chosen, bolt the planer down rather than resting it loose.
FAQ
Can any benchtop planer fit on a universal planer stand?
Most can, as long as two measurements line up. The planer base footprint must sit inside the stand top, and the mounting hole pattern either matches pre-drilled holes, as on the DEWALT DW7350 for DEWALT planers, or the top must be drilled to suit. Check the combined weight against the stand capacity as well. Planers with unusual base shapes can sit on a plywood sub-base, with the sub-base bolted to the stand.
Is a rolling base stable enough for thickness planing?
A rolling base that lowers the machine onto its feet or frame for work, like the HTC-2000 and the Bora PM-1000, is stable in use because the casters carry the load only while moving. A stand that stays on casters full time depends on its caster locks, so it should be locked before every pass and used on a flat floor. On uneven floors, a stationary stand is the steadier choice.
What working height should a planer stand provide?
A bed height around 29 to 32 inches works for most users because it matches common workbench and roller stand heights, making infeed and outfeed support easier to set level with the planer tables. Adjustable stands, like the Eastrexon with its 31 to 44.7 inch range, help when the planer must align with a fixed surface.
Can a mobile base go under a planer that is already on a stand?
Yes, and that is the main use case for bases like the HTC-2000 and PM-1000. Size the base to the stand or cabinet footprint rather than the planer, and add the weights together: planer, stand, and stored items all count against capacity.
Conclusion
For a single-purpose answer, the DEWALT DW7350 remains the benchmark planer stand: pre-drilled top, shelf, and a pedal-operated mobile base rated for 300 pounds. The Eastrexon is the flexible alternative when height adjustment and a large rolling top matter more than brand-specific mounting. The POWERTEC UT1002 covers the stationary corner of a shop at a budget tier, while the HTC-2000 and Bora Portamate PM-1000 turn an existing planer station into a movable one, the HTC carrying heavier cabinets and the Bora suiting lighter setups. Measure the footprint, add up the full weight, and choose the format that matches how often the planer moves.
Related guides
Read next
- Bosch BLAZE GLM165-40 Laser Measure Review for the Shop
- Best Workbench Casters: 5 Retractable Kits for Any Shop
- Best Shop Air Filtration Systems for Woodshops: 5 Picks
- Best Rolling Creeper Seats With Tool Trays for Workshops
- Best 1/2-Inch Router Bit Sets: 5 Starter Picks Compared
- Best Router Table Safety Switches for Fast, Safe Stops
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!