Updated Nov 21, 2026· 9 min read

Key takeaways

  • Five oscillating multi-tool blade packs for woodworking, from universal-fit sets to snap-in carbide and bi-metal blades for clean plunge cuts.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

An oscillating multi-tool earns its keep in a woodworking shop when the blade matches the cut. Flush-trimming a dowel, plunging into a door jamb, cutting out a rotted section of trim, or notching a shelf to fit a wall all ask for different teeth, widths, and depths. The blade decides the result far more than the tool driving it, and a dull or wrong blade turns a two-minute job into a long fight with scorched edges and wandering cuts.

Our top pick: DEWALT DWA425SET General Purpose Oscillating Blade Set, 5-Piece. Runner-up: Bosch OSL005C Oscillating Multi-Tool Accessory Blade Set, 5-Piece.

This roundup gathers five blade packs sold on Amazon, from a general-purpose five-piece set to a carbide three-pack and a twenty-five-piece shop pack. Every description below comes from the maker or the listing, and where a figure is not published, the Specs block says so rather than borrowing a number from a different model.

As an Amazon Associate, we earn from qualifying purchases.

Contents
  1. Quick answer
  2. The five blade packs
  3. How to choose
  4. Who should skip
  5. Frequently asked questions
  6. Final verdict
  7. Product and ASIN Reference

Quick answer

For most woodworking jobs, the DEWALT five-piece set covers the common cuts with a universal mount. If your tool uses the snap-in mount, the Bosch five-piece set is the matching pick. The Diablo carbide three-pack suits nail-embedded wood, the FEIN twenty-five-pack suits a busy shop, and the Bosch three-pack refills the most-used wood blade.

The five blade packs

DEWALT DWA425SET General Purpose Oscillating Blade Set, 5-Piece

The DEWALT set is the general-purpose pick in this roundup, and its contents are itemized by the maker rather than left vague. Two DWA4258 blades carry a PlungePoint tip with a high-speed steel edge for common construction materials, two DWA4206 blades handle wood with nails, and a four-inch semi-circle blade covers long straight cuts in wood. That mix handles the cuts a woodworking shop meets most often: plunge cuts, flush cuts, and trimming in place.

Fitment is the universal kind, with tool-free changes and no adapter. DEWALT lists the brands its blades fit: DEWALT, CRAFTSMAN, ROCKWELL, PORTER-CABLE, SKIL, RIGID, MILWAUKEE, and MAKITA. The list does not name Bosch, Fein, or tools with the closed-center snap-in mount, so owners of those tools should check their manual before buying. DEWALT lists wood, wood with nails, drywall, and metal among the uses, which makes this set a solid mid-range choice for a shop that owns one universal-fit tool and wants a single pack that covers the usual jobs.

Specs
– Pieces: 5
– Contents: 2 DWA4258 1-1/4 in PlungePoint blades, 2 DWA4206 1-1/4 in wood-with-nails blades, 1 four in (102 mm) semi-circle wood cutting blade
– Blade edge: High-speed steel edge on the DWA4258
– Fitment: Universal Fitment, tool-free blade changes, no adapter
– Fits: DEWALT, CRAFTSMAN, ROCKWELL, PORTER-CABLE, SKIL, RIGID, MILWAUKEE, MAKITA
– Materials: Wood, wood with nails, drywall, metal
– Weight: Not stated

Bosch OSL005C Oscillating Multi-Tool Accessory Blade Set, 5-Piece

The Bosch set is the one to consider when the tool takes the snap-in mount. Bosch lists the contents by model, one of each: OSL114C, OSL114JF, OSL114F, OSL200RS, and OSL312F. The five blade types are a high-carbon steel plunge cut blade, a bi-metal Xtra Clean plunge cut blade, a carbide plunge cut blade, a bi-metal flush cut blade, and a high-carbon steel rigid scraper blade. Bosch does not say which model is which type, so this article does not pair them up either.

The mount is the three-dimensional snap-in system, with a color-coded interface and a laser-etched blade to identify the right blade at a glance. Bosch describes blade changes in three seconds without touching the blade. Bosch also says the interface works with OIS-compatible tools, naming Bosch, Fein, Milwaukee, Makita, Rigid, and others. The listing gives blade widths of one and one-quarter, two, and three and one-half inches. With five distinct blade types in one pack, this set suits a shop that wants one purchase to cover plunge cuts, flush cuts, carbide work, and scraping.

Specs
– Pieces: 5
– Contents: OSL114C, OSL114JF, OSL114F, OSL200RS, OSL312F, one of each
– Blade types: High-carbon steel plunge cut, bi-metal Xtra Clean plunge cut, carbide plunge cut, bi-metal flush cut, high-carbon steel rigid scraper
– Interface: Three-dimensional snap-in mount, color-coded, laser-etched blades
– Compatibility: Snap-in tools; Bosch also states it works with OIS-compatible tools
– Blade widths: 1-1/4 in, 2 in, 3-1/2 in
– Materials: Metal, wood, general-purpose materials

Diablo DOU125CGP3 Carbide Oscillating Blade, 3-Pack

The Diablo pack is three blades of one type, and that focus is its strength. Each blade is one and one-quarter inches wide with a one and one-half inch cutting depth, carbide teeth, and a Black I.C.E. coating, with a Curve Contact Edge that Diablo describes as giving precise plunge cuts with less vibration. Diablo names nail-embedded wood, clean wood, metal, and plastics as its general-purpose cuts, and carbide teeth hold an edge far longer than bi-metal when nails and screws hide in old lumber.

This is the universal-fit version of the blade, with an adapter-free design that Diablo says attaches to most tools. Diablo lists oscillating multi-tools from Bosch, Craftsman, Dewalt, Dremel, Fein, Hart, Makita, Milwaukee, Porter-Cable, Ridgid, and Rockwell, and more. Diablo states plainly that this pack is not compatible with tools that use the closed-center snap-in mount, and it sells a separate snap-in version of the same blade. The UPC on Diablo’s page matches the listing’s, which supports the pack identity. For remodel work and reclaimed lumber, this is the carbide pick in the roundup.

Specs
– Pieces: 3
– Blade width: 1-1/4 in
– Cutting depth: 1-1/2 in
– Teeth: Carbide
– Coating: Black I.C.E. coating
– Edge: Curve Contact Edge
– Fitment: Universal fit, adapter-free; not compatible with closed-center snap-in mount tools
– Materials: Nail-embedded wood, clean wood, metal, plastics

FEIN E-Cut Standard Oscillating Saw Blades, 25-Pack

FEIN invented the oscillating multi-tool, and its blades still set the benchmark many woodworkers measure against. This pack holds twenty-five identical E-Cut Standard blades, each one and five-eighths inches wide, in bi-metal. It is the bulk buy in this roundup: the pick for a shop or a service crew that burns through wood-cutting blades and does not want to reorder after every job.

The listing title and the tracker record tie this pack to model 63502124038, and the blade count and width are confirmed by both. The mount is not stated in the sources found, so check it against your tool’s manual before buying. The same applies to blade length, which is also not stated here. What the pack does offer is depth of supply: twenty-five blades of one proven shape, so the drawer stays full through a long run of trim work and cabinet fitting.

Specs
– Pieces: 25
– Model: 63502124038
– Blade width: 1-5/8 in
– Blade material: Bi-metal
– Blade type: E-Cut Standard
– Mount: Not stated
– Blade length: Not stated
– Weight: Not stated

Bosch OSL114JF-3 Bi-Metal Oscillating Multi-Tool Blade, 3-Pack

The last pick is a refill, and it deserves an open note: this blade also ships inside the Bosch five-piece set above, as model OSL114JF. The three-pack suits a reader who already owns that set and reaches for the Japanese-tooth wood blade more than any other, or a reader who only needs that one blade and wants three of them on hand.

The blade is a one and one-quarter inch bi-metal plunge cut blade with a Japanese tooth design, built for clean cuts in wood. The overall length is four inches, and the UPC is 000346482805. It mounts on the snap-in system, so it fits the same tools as the Bosch set above. The listing’s part number field reads OSL114F-3, while the title and model number read OSL114JF-3; this article follows the title and model number. The listing showed no live offers when last checked, so confirm availability at import before relying on this pick.

Specs
– Pieces: 3
– Model: OSL114JF-3
– Blade width: 1-1/4 in
– Overall length: 4 in
– Blade material: Bi-metal
– Tooth design: Japanese tooth, plunge cut
– Mount: Snap-in mount
– UPC: 000346482805

How to choose

Match the mount first, because nothing else matters if the blade will not lock on. Universal-fit blades have an open back that slides onto a clamp pin, and they fit the long list of brands each maker names. Snap-in blades use a closed, three-dimensional interface that only fits tools built for it. Read your tool’s manual, find the mount it takes, and buy blades made for that mount. Adapters exist, but they add runout and are a poor substitute for the right blade.

Match the tooth material to the material next. High-carbon steel cuts clean wood well and is the budget choice for trim and softwood. Bi-metal adds a hardened edge that survives nails, screws, and mixed materials, which makes it the everyday choice for remodel work. Carbide holds an edge longest in nail-embedded wood and abrasive materials, and it is the right call when the lumber is old or reclaimed. For clean cuts in hardwood, a Japanese tooth design cuts with less tear-out than a coarse tooth.

Who should skip

Skip the universal-fit packs if your tool uses the closed-center snap-in mount, and skip the snap-in packs if your tool uses the open-back universal mount; the wrong mount simply will not seat. Skip the twenty-five-piece FEIN pack if you cut with a multi-tool only a few times a year, since twenty-five blades will sit in a drawer for a long time. Skip the carbide Diablo pack if your work is clean, nail-free trim, where a bi-metal blade gives the same result for less. Skip the Bosch three-pack if you do not already own the Bosch set or a snap-in tool, since the blade fits nothing else in this roundup.

Frequently asked questions

Do universal-fit blades work on every oscillating multi-tool?

No. Universal-fit blades fit the open-back tools each maker lists, and every maker names its exclusions. Tools with the closed-center snap-in mount need blades made for that mount, and a universal-fit blade will not seat on them. Check your tool’s manual for the mount it takes before buying any blade.

What blade material lasts longest in nail-embedded wood?

Carbide teeth hold an edge longest when nails and screws hide in old lumber, which is why the Diablo carbide pack leads this roundup for remodel work. Bi-metal is the next step down and handles occasional nails well. High-carbon steel dulls fast on metal and suits clean wood only.

Can I use a metal-cutting blade on wood?

A bi-metal blade rated for wood and metal cuts wood cleanly, and several blades in this roundup are rated for both. A blade rated for metal only may cut wood slowly and leave a rough edge, so use a blade the maker rates for the material in front of you.

How do I know when a blade is worn out?

A worn blade cuts slowly, wanders off the line, scorches the wood, and needs more push to advance. Teeth that look rounded or missing under a glance are done. Swap the blade rather than forcing it, since a dull blade heats the work and risks a crooked cut.

Final verdict

The DEWALT five-piece set is the pick for most woodworking shops, because its universal mount and itemized contents cover the common cuts without guesswork. The Bosch five-piece set is the matching pick for snap-in tools, and the Diablo carbide three-pack is the pick for nail-embedded wood. The FEIN twenty-five-pack suits a busy shop that wants depth of supply, and the Bosch three-pack is the honest refill for the wood blade you will reach for most. Buy for your mount first, your material second, and your pack size last.

Product and ASIN Reference

Product ASIN
DEWALT DWA425SET General Purpose Oscillating Blade Set, 5-Piece B0DHLVKBR8
Bosch OSL005C Oscillating Multi-Tool Accessory Blade Set, 5-Piece B01DDA8992
Diablo Carbide Oscillating Blade, 3-Pack B089KW6C8Q
FEIN E-Cut Standard Oscillating Saw Blades, 25-Pack B00119T5BY
Bosch OSL114JF-3 Bi-Metal Oscillating Multi-Tool Blade, 3-Pack B01DDA7KFG
F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Oscillating Multi-Tool Blades for WoodworkingCheck price on Amazon

Related guides

Browse all Buying Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.