Key takeaways
- Compare the best sawhorses and work stands for woodworking shops, with per-pair load ratings, pack sizes, top features and weights checked for each model.
What's inside
- Quick Answer
- Bora Portamate Speedhorse PM-4500T (2-Pack)
- ToughBuilt C700 Sawhorse and Jobsite Table (2-Pack)
- ToughBuilt C600 Sawhorse and Jobsite Table (1-Pack)
- Worx Pegasus WX051 Folding Work Table and Sawhorse
- Amazon Basics Rectangular Folding Sawhorse (Set of 2)
- How to Choose
- Who Should Skip
- FAQ
- Final Verdict
- Quick Answer
- Bora Portamate Speedhorse PM-4500T (2-Pack)
- ToughBuilt C700 Sawhorse and Jobsite Table (2-Pack)
- ToughBuilt C600 Sawhorse and Jobsite Table (1-Pack)
- Worx Pegasus WX051 Folding Work Table and Sawhorse
- Amazon Basics Rectangular Folding Sawhorse (Set of 2)
- How to Choose
- Who Should Skip
- FAQ
- Final Verdict
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Sawhorses and Work Stands for Woodworking Shops
- Top Pick: Bora Portamate Speedhorse PM-4500T (2-Pack)
- Runner-up: ToughBuilt C700 Sawhorse and Jobsite Table (2-Pack)
- Also consider: ToughBuilt C600 Sawhorse and Jobsite Table (1-Pack)
A good pair of sawhorses is the fastest way to turn open floor space into a work surface. In a woodworking shop they hold sheet goods for breakdown, support long boards at cutting height, and pair up under a door slab or plywood top to form a temporary bench for assembly and finishing. Because they fold away when the job is done, they suit small shops where a permanent bench would eat up room needed for machines and material storage.
As an Amazon Associate, we earn from qualifying purchases.
The five models below cover the main designs a woodworker is likely to compare: quick-deploy steel horses, heavy steel horses with adjustable support arms, a hybrid unit that works as both a table and a sawhorse, and a lightweight folding pair for occasional cutting and painting support. For each one, the pack size, load rating, frame material, top features and weight are stated as the maker lists them.
This article contains affiliate links, and we may earn a commission when you buy through them at no extra cost to you.
Contents
- Quick Answer
- Bora Portamate Speedhorse PM-4500T (2-Pack)
- ToughBuilt C700 Sawhorse and Jobsite Table (2-Pack)
- ToughBuilt C600 Sawhorse and Jobsite Table (1-Pack)
- Worx Pegasus WX051 Folding Work Table and Sawhorse
- Amazon Basics Rectangular Folding Sawhorse (Set of 2)
- How to Choose
- Who Should Skip
- FAQ
- Final Verdict
Quick Answer
The Bora Portamate Speedhorse PM-4500T two-pack is the top pick for most woodworking shops. Its legs deploy at the push of a button, the pre-drilled metal top accepts a sacrificial 2×4, and Bora rates each horse at 1,800 lb. Shops that need clamping on the support itself should look at the Worx Pegasus instead.
Bora Portamate Speedhorse PM-4500T (2-Pack)
The Speedhorse is built around setup speed. A lever under the top releases the legs, so each horse goes from folded flat to standing in seconds, and the legs fold back into the beam in any order when the job is finished. For a shop that clears its floor space between projects, that quick changeover is the main reason to choose this pair over slower folding designs.
The top is a pre-drilled metal beam, and Bora intends you to screw a length of 2×4 along it as a sacrificial surface, so blade overruns cut into cheap lumber instead of steel. Bora lists the load capacity at 1,800 lb for a single horse, and its own comparison chart gives a weight capacity of 3,600 lb per pair. The working height is a fixed 30 inches, which pairs well with most benches and table saws used as outfeed support.
Specs:
– Pack size: 2 sawhorses
– Load capacity: 1,800 lb per sawhorse; 3,600 lb per pair as listed in Bora’s chart
– Material: metal top and legs
– Working height: 30 in
– Top features: pre-drilled metal top for a screwed-on 2×4 sacrificial board; push-button quick-deploy legs; legs fold in any order; carry handle
– Weight: 8.6 kg as listed
View the Bora Speedhorse PM-4500T on Amazon
ToughBuilt C700 Sawhorse and Jobsite Table (2-Pack)
The C700 is the heavy steel option in this roundup. ToughBuilt builds it from high-grade steel with a powder-coated finish, and rates each horse at 1,300 lb, or 2,600 lb per pair. That rating, spread across two horses, is enough for stacked sheet goods, a solid-core door, or a bench top loaded with tools during a glue-up.
What separates the C700 from a plain steel horse is the top hardware. The support arms adjust to hold 2×4 stock, and they open wider for 4×4 material, so the pair can cradle beams as well as boards. The legs adjust for height, which helps when you need the top level with a table saw or workbench. Folded, the pair is a substantial carry at the listed weight, so this set lives in the shop rather than travelling in a car.
Specs:
– Pack size: 2 sawhorses (model TB-C700-2)
– Load capacity: 1,300 lb per sawhorse; 2,600 lb per pair
– Material: alloy steel, powder-coated finish
– Working height: 32.09 in as listed for the model
– Top features: adjustable support arms for 2×4 and 4×4 stock; height-adjustable legs; folding legs
– Weight: 48.6 lb for the pair as listed
View the ToughBuilt C700 2-Pack on Amazon
ToughBuilt C600 Sawhorse and Jobsite Table (1-Pack)
The C600 is sold as a single horse, which makes it the flexible buy for shops that already own one horse and need a match, or that want a single support for long stock running off a bench. ToughBuilt lists a 1,300 lb load capacity for the unit, the same per-horse figure it gives for its larger models, and describes the same 2,600 lb figure when two are used as a pair.
Construction follows the same pattern as the C700: an all-steel frame with a powder-coated finish and adjustable support arms that grip dimensional lumber on the top. At the listed weight it is easy to carry one-handed and hangs flat against a wall. Buyers should note the pack size before ordering, because a single C600 on its own cannot form a bench; it works as a pair only when you buy two.
Specs:
– Pack size: 1 sawhorse (model TB-C600)
– Load capacity: 1,300 lb for the single unit as listed; 2,600 lb per pair in ToughBuilt’s rating for the model
– Material: steel, powder-coated finish
– Working height: not stated
– Top features: adjustable support arms; folding legs; carry handle
– Weight: 18.08 lb as listed
View the ToughBuilt C600 on Amazon
Worx Pegasus WX051 Folding Work Table and Sawhorse
The Pegasus takes a different approach: it is a folding work table that also serves as a sawhorse. Opened as a table, it gives a 31 by 25 inch surface at 32 inches high, with two quick clamps and four clamp dogs included for holding work on the top. Worx rates the table surface at 300 lb, and states a 1,000 lb capacity when the unit is used in sawhorse mode, for example with a second Pegasus or another support of the same height under a long board.
Because the clamping is built in, the Pegasus suits assembly, sanding and routing work where the piece needs to stay put, not just rest on a beam. It folds flat for storage and the legs tuck under the top, and Worx notes that several of its supports share the same height and connectors, so tables can be joined into a larger surface. It is sold singly, so a traditional two-horse setup means buying two units.
Specs:
– Pack size: 1 unit
– Load capacity: 300 lb as a work table; 1,000 lb in sawhorse mode, as Worx states
– Material: not stated
– Working height: 32 in
– Top features: 31 x 25 in work surface; 2 clamps and 4 clamp dogs included; folds flat; links with other Worx supports of the same height
– Weight: not stated
View the Worx Pegasus WX051 on Amazon
Amazon Basics Rectangular Folding Sawhorse (Set of 2)
The Amazon Basics set is the light-duty pair in this group, aimed at occasional cutting, painting stands and trim work rather than daily shop duty. Amazon rates the set at 900 lb across the pair with the load evenly distributed, which covers sheet goods and lumber stacks for home projects but leaves less margin than the steel pairs above.
Each horse folds flat to under two inches thick, arrives fully assembled, and carries a set of hooks: four along the top and two underneath, for cords and small tools. Fold-out stoppers form a light shelf between the legs for material offcuts. At the listed weight, the pair is the easiest here to carry up stairs or hang on a single wall hook, which is the real appeal for a garage workshop that shares space with a car.
Specs:
– Pack size: set of 2 sawhorses (model AMZ1719)
– Load capacity: 900 lb per pair, evenly distributed
– Material: metal frame
– Working height: not stated
– Top features: 4 top hooks and 2 bottom hooks per horse; fold-out stoppers as a light shelf; locking braces; non-slip feet; fully assembled
– Folded size: 31.05 x 1.97 x 23.62 in
– Weight: 4.86 lb as listed
View the Amazon Basics Folding Sawhorse Set on Amazon
How to Choose
Start with the load you actually support. A pair of horses under plywood and a circular saw needs far less capacity than a pair holding a workbench top, a vice and a hardwood slab. Check whether the maker states the rating per horse or per pair before comparing numbers, because a 1,800 lb per-pair figure and a 1,800 lb per-horse figure describe very different products.
Next, look at the top. Plain beams are fine for breakdown cuts, but a pre-drilled top that takes a screwed-on 2×4 gives you a replaceable sacrificial surface, and adjustable arms that open for 4×4 stock matter if you break down beams or build with heavy framing lumber. If you plan to clamp workpieces directly on the support, a table-style unit with dogs and clamps does that job better than any beam horse.
Height and storage finish the decision. Fixed heights around 30 to 32 inches match most benches; adjustable legs help on uneven floors. Finally, weigh the folded package: a heavy steel pair is a fixture in one shop, while a light pair that folds flat suits shared or rented space.
Who Should Skip
Skip folding sawhorses altogether if your work is mostly heavy timber framing or repeated loads near the top of these ratings; a fixed steel trestle or purpose-built workbench gives a wider, steadier base. Skip the light pairs if you cut sheet goods daily, because their lower ratings leave little margin. And skip the table-style hybrid if all you need is a simple support for a saw: you pay for clamping hardware you will never use, and a plain pair sets up faster.
FAQ
Are load ratings given per sawhorse or per pair?
Both conventions appear in these listings, and the makers state them differently. ToughBuilt rates its horses per unit and per pair, Bora lists a per-horse figure with a per-pair chart figure, and Amazon gives one 900 lb figure for its pair used together. Always read the rating the way the maker states it for the model you are buying.
Can one sawhorse be used on its own?
A single horse works as an extra support for long boards coming off a bench or saw, which is why some models are sold singly. For cutting or assembly you need two supports of the same height, so check the pack size in the listing before ordering.
Why add a 2×4 on top of a metal sawhorse?
A screwed-on 2×4 acts as a sacrificial surface. Saw blades and drill bits that break through the workpiece cut into cheap lumber instead of the steel beam, and the wood top also grips the workpiece better than bare metal. Pre-drilled tops, like the one on the Speedhorse, make fitting that board a quick job.
Do folding sawhorses suit uneven floors?
Fixed-leg folding horses need a reasonably flat floor to sit without rocking. Models with individually adjustable or height-adjustable legs cope better with sloped or rough ground, because each leg can be set to keep the top level.
Final Verdict
For most shops, the Bora Speedhorse pair is the easiest recommendation: fast setup, a sacrificial-top-ready beam and the strongest ratings here. The ToughBuilt C700 pair is the pick for heavy, regular loads, the C600 single suits shops adding one support at a time, the Worx Pegasus earns its place when clamping matters more than capacity, and the Amazon Basics set covers light, occasional work in the least storage space.
Related guides
Read next
- Best Benchtop Band Saws for Home Woodworking Shops
- Best Shop Vacuums for Woodworking Dust and Debris Cleanup
- Best Planer Stands and Rolling Bases for Small Shops
- Best Utility Knives for Woodworking and Shop Tasks
- Best Table Saw Blades for Fine Woodworking Projects
- Best Wood Turning Tool Sets for Beginners and Bowls
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!