Updated Nov 20, 2026· 10 min read

Key takeaways

  • The best forstner bit sets compared on size range, steel type, rim design and shank fit, with five real sets for clean, flat-bottomed holes.

As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.

⭐ Key Takeaways
Quick answer: Our top pick is Fisch Black Shark Forstner Bit Set, 16-Piece (FSA-367208), with IRWIN Marples Forstner Bit Set, 14-Piece (1966893) as a strong alternative.

A Forstner bit earns its place in the shop by doing one job no twist drill or spade bit can match: boring a hole with a genuinely flat bottom, smooth walls, and a clean rim that does not tear out where it enters the wood. That makes forstner bit sets the standard choice for concealed hinge cups, recesses for knock-down fittings, overlapping holes for mortise waste removal, and any stopped hole where depth has to stop exactly where you set it. Because the rim guides the bit rather than a central screw, a Forstner bit can also bore partial holes on an edge and angled holes that would send a spade bit skating across the surface.

As an Amazon Associate, we earn from qualifying purchases.

The catch is that sets vary in the details that decide how cleanly they cut and how long they stay sharp. Rim designs range from a plain continuous edge to serrated and wave profiles, and shanks come as round, reduced, hex, or flatted patterns that behave differently in a chuck. This guide compares five real sets on the figures their makers publish: piece count, size range, steel type, rim style, shank type, and whether a case is included.

This article contains affiliate links, and a commission may be earned on qualifying purchases made through them.

Contents
  1. Quick Answer
  2. Fisch Black Shark Forstner Bit Set, 16-Piece (FSA-367208)
  3. IRWIN Marples Forstner Bit Set, 14-Piece (1966893)
  4. PORTER-CABLE Forstner Bit Set, 14-Piece (PC1014)
  5. Fisch Wave Cutter Forstner Bit Set, 16-Piece (FSA-196037)
  6. KENDO Forstner Bit Set, 16-Piece (FDB-16PCS)
  7. How to Choose
  8. Who Should Skip
  9. FAQ
  10. Final Verdict

Quick Answer

The Fisch Black Shark 16-piece set is the top pick for most woodworkers: forged in Austria from high-speed steel, it covers 1/4 inch to 2-1/8 inches, cuts with a patented wave-cut rim, and grips securely on reduced shanks with three flat surfaces. It ships in a wooden box. On a tighter budget, the IRWIN Marples 14-piece set covers 1/4 inch to 2 inches.

Fisch Black Shark Forstner Bit Set, 16-Piece (FSA-367208)

Fisch Black Shark Forstner Bit Set, 16-Piece (FSA-367208)

Fisch Black Shark Forstner Bit Set, 16-Piece (FSA-367208)

Check price on Amazon

Fisch forges the Black Shark bits in Austria rather than casting them, and the listing states the material as premium high-speed steel, which holds an edge longer in dense hardwood than plain carbon steel. The rim uses Fisch’s patented wave-cut geometry with dual lifters and a center point, a profile designed to slice the rim of the hole cleanly while clearing chips out of the cut.

Sixteen bits run from 1/4 inch up to 2-1/8 inches, which covers everything from small dowel recesses and 35 mm hinge cups to wide counterbores. The shanks are reduced cylinders with three flat clamping surfaces, so the chuck grips flats instead of a polished round and the bit is far less likely to spin under load. The set ships in a wooden box that keeps the large cutters separated from the small ones.

Specs:
– Pieces: 16
– Size range: 1/4 inch to 2-1/8 inches
– Steel: High-speed steel (HSS), forged; listing material field states hot forged alloy steel
– Rim style: Patented wave-cut rim with dual lifters and center point
– Shank: Reduced straight shank with three flat clamping surfaces
– Case: Wooden box included
– Origin: Made in Austria

See it here: https://www.amazon.com/dp/B086PGT174?tag=powertoolsdiy04-20

IRWIN Marples Forstner Bit Set, 14-Piece (1966893)

IRWIN Marples Forstner Bit Set, 14-Piece (1966893)

IRWIN Marples Forstner Bit Set, 14-Piece (1966893)

Check price on Amazon

The Marples set is the familiar mid-range option from IRWIN, built from carbon steel with cutting angles the maker optimizes for flat-bottom holes in fine woodworking and cabinet work. Carbon steel takes a keen edge and is easy to touch up with a file or stone, though it will need that attention sooner than high-speed steel in heavy hardwood use.

Fourteen pieces span 1/4 inch to 2 inches, a range that handles shelf-pin holes, hinge recesses, and most furniture counterbores. The detail that sets this set apart is the shank: every bit, including the widest cutters, uses a reduced 3/8-inch shank, so the whole set runs in a drill press or a hand drill with a 3/8-inch chuck without swapping chucks for the big sizes. A storage case is included to keep the bits indexed by size.

Specs:
– Pieces: 14
– Size range: 1/4 inch to 2 inches
– Steel: Carbon steel
– Rim style: Continuous rim with optimized cutting angles, as the maker states it
– Shank: Reduced round shank, 3/8 inch
– Case: Storage case included
– Model: 1966893

See it here: https://www.amazon.com/dp/B071S1BGXV?tag=powertoolsdiy04-20

PORTER-CABLE Forstner Bit Set, 14-Piece (PC1014)

PORTER-CABLE Forstner Bit Set, 14-Piece (PC1014)

PORTER-CABLE Forstner Bit Set, 14-Piece (PC1014)

Check price on Amazon

PORTER-CABLE’s PC1014 is a long-running contractor-grade set of 14 bits in hardened steel. The heads use an open tooth design: instead of a fully continuous rim, the cutting edge is broken into teeth, which clears chips quickly and lets the bit bore fast in both softwood and hardwood. That makes it a practical pick for a drill press that sees a lot of repetitive boring.

The sizes run from 1/4 inch to 2 inches, covering the common cabinet and furniture diameters. The bits come in a compact storage case with snug slots for each size, which suits a set that travels between the shop and a job site. The listings checked do not state the shank pattern, so confirm the shank against your chuck before ordering if that detail matters to you.

Specs:
– Pieces: 14
– Size range: 1/4 inch to 2 inches
– Steel: Hardened steel, as the maker states it
– Rim style: Open tooth design for fast chip removal
– Shank: Not stated in the listing data checked
– Case: Compact storage case included
– Model: PC1014

See it here: https://www.amazon.com/dp/B004TSZEB4?tag=powertoolsdiy04-20

Fisch Wave Cutter Forstner Bit Set, 16-Piece (FSA-196037)

Fisch Wave Cutter Forstner Bit Set, 16-Piece (FSA-196037)

Fisch Wave Cutter Forstner Bit Set, 16-Piece (FSA-196037)

Check price on Amazon

The original Wave Cutter line built Fisch’s reputation in this category. Its patented wave-shaped rim replaces the plain knife edge with a serrated, undulating profile, and Fisch states that the design cuts with less power and runs cooler than a conventional rim, which helps the edge last in abrasive sheet goods and dense stock.

Sixteen pieces again cover 1/4 inch to 2-1/8 inches, and the bits are alloy steel. The set is aimed at blind, edge, and angled holes in softwood and hardwood, the jobs where a rim-guided bit has no real substitute. The bits come in a wooden box. The listings checked do not publish the individual diameter list or the shank dimensions, so check the maker’s data sheet if you need one specific mid-range size confirmed before buying.

Specs:
– Pieces: 16
– Size range: 1/4 inch to 2-1/8 inches
– Steel: Alloy steel
– Rim style: Patented wave cutter rim
– Shank: Not stated in the listing data checked
– Case: Wooden box included
– Model: FSA-196037

See it here: https://www.amazon.com/dp/B07VZXHGXK?tag=powertoolsdiy04-20

KENDO Forstner Bit Set, 16-Piece (FDB-16PCS)

KENDO Forstner Bit Set, 16-Piece (FDB-16PCS)

KENDO Forstner Bit Set, 16-Piece (FDB-16PCS)

Check price on Amazon

KENDO’s 16-piece set is the budget route into full size coverage. The bits are alloy steel with a round shank, and the maker lists the set for hardwood, softwood, plastic, and plywood, which matches the mixed material work a home shop usually asks of an inexpensive set.

The smallest bit is 1/4 inch and the set runs to sixteen pieces in total; the listing data checked does not state the largest diameter, so treat the top end as unconfirmed and check the product page if you need a specific wide size. A storage case is included, which keeps the edges from chipping against each other in a drawer. For occasional hinge, dowel, and craft work, the specification is honestly matched to the job.

Specs:
– Pieces: 16
– Size range: Starts at 1/4 inch; largest size not stated in the listing data checked
– Steel: Alloy steel
– Rim style: Not stated in the listing data checked
– Shank: Round shank
– Case: Storage case included
– Model: FDB-16PCS

See it here: https://www.amazon.com/dp/B0CM9DN5Q3?tag=powertoolsdiy04-20

How to Choose

Start with the holes you know you will bore. Cabinet work centers on the 35 mm hinge cup and a handful of fractional sizes for dowels and fittings, so a set that stops at 1 inch, like a small precision set, can leave you short; the 14- and 16-piece sets above reach 2 inches or 2-1/8 inches and cover nearly everything a furniture shop meets. Check that the sizes step in the increments you need rather than skipping the diameter your hardware calls for.

Steel decides how often you sharpen. High-speed steel, as in the Fisch Black Shark set, holds its edge longest in hard, abrasive stock. Carbon steel, as in the IRWIN Marples set, sharpens quickly and easily but dulls sooner. Alloy steel budget sets cut well when sharp and suit lighter use. Rim style matters alongside steel: serrated, toothed, and wave rims clear chips and cut faster, while a plain continuous rim tends to leave the smoothest wall on small, fine holes.

Shank fit is the third check. Reduced 3/8-inch shanks run in smaller chucks, hex and flatted shanks resist spinning under heavy torque, and plain round shanks are the drill press standard. Finally, weigh the case: a wooden box or indexed case protects ground edges, while bits stored loose dull each other in a drawer.

Who Should Skip

Skip the big 16-piece sets if you bore exactly one repeated size, such as a single hinge-cup diameter on a production run. One quality individual bit in that size, replaced as needed, serves you better than a case of sizes that never leave the box. Skip budget alloy sets if you bore dense hardwood daily; the sharpening stops will cost more time than the better steel costs money. And skip Forstner bits entirely for rough through-holes in framing lumber, where a spade bit is faster, cheaper, and leaves a hole that is perfectly adequate for the work.

FAQ

Can Forstner bits be used in a hand drill?

Smaller sizes can, especially sets with reduced or hex shanks that grip well in a hand drill chuck, but a drill press gives a straighter, more controlled hole and is the safer choice for the largest diameters. Keep speeds low on wide bits and clamp the work, because a big Forstner bit generates serious torque when it bites.

What speed should a Forstner bit run at?

Larger bits need slower speeds. As a working pattern, small bits under 1 inch tolerate moderate drill press speeds, while bits over 1-1/2 inches should run at the slow end of the press’s range. Follow the speed chart from the bit maker when one is published, and back off if the rim starts to discolor the wood or smoke.

How do you sharpen a Forstner bit?

Touch up the flat inner faces of the rim and the cutting edges with a fine file or a small slip stone, working only on the inside faces so the outside diameter, which sets the hole size, stays unchanged. Carbon steel bits respond well to this; carbide-tipped bits, none of which appear in the sets above, need diamond abrasives instead.

Are metric sizes worth adding?

Only if your hardware is metric. European concealed hinges are bored at 35 mm, which falls between the fractional sizes in these inch sets; the 1-3/8-inch bit is close but not identical. If you bore hinge cups often, add one dedicated 35 mm bit alongside an inch set rather than replacing the set.

Final Verdict

For a single set that covers the full working range with the best edge life, the Fisch Black Shark 16-piece set is the buy: forged high-speed steel, a wave-cut rim, flatted reduced shanks, and a wooden box. The IRWIN Marples 14-piece is the sensible mid-range alternative, with carbon steel that sharpens easily and reduced shanks that fit almost any chuck. The PORTER-CABLE PC1014 suits fast, repetitive boring, the Fisch Wave Cutter remains the specialist for clean rims and angled work, and the KENDO set covers the sizes honestly for occasional use at the lowest commitment.

F
FD Woodworking Editorial Team
We compare specs, warranty terms, long-term owner feedback and street pricing before anything earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Forstner Bit Sets for Clean, Flat-Bottomed HolesCheck price on Amazon

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.