Key takeaways
- Compare the best lazy Susan bearings for shop and furniture builds, from a 6-inch steel two-pack to a 20-inch aluminum ring, with sizes and load ratings.
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Buying Guides › Best Lazy Susan Bearings: 5 Turntable Bearings for DIY
A lazy Susan bearing is the flat ring of hardware that sits between a fixed base and the board, tray or tabletop that turns on it. Two plates ride on a race of steel balls, so the top spins a full circle while the base stays put. Pick the right diameter and load rating and a shop-built turntable feels smooth and planted; pick one too small or too light and the top rocks, grinds and wanders off center under load.
The five bearings below cover the sizes a woodworker reaches for most, from a compact 6-inch steel plate for small trays and displays up to a 20-inch aluminum ring for wide table tops. Two build styles appear throughout: stamped steel plates, which carry the heaviest published ratings, and machined aluminum rings, which run quieter and shrug off damp kitchen and shop air. Every pick here is a standalone bearing only, with no tray or top included.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most builds, the Woodpeckers 12-inch steel bearing is the first pick: a 1,000-pound published rating, a 5/16-inch profile and plates sized for tops from 15 to 30 inches across. Choose an aluminum ring such as the Besimple 12-inch or the TamBee 20-inch when the turntable will live in a kitchen or damp space, and drop to the 6-inch or 8-inch plates for small trays, plant stands and display bases.
The picks
Woodpeckers Lazy Susan Hardware, 12 Inch, Pack of 1
This is the bearing sold under a woodworking brand name, and it is the premium main pick of the group. The plates are alloy steel, 12 inches across and 7.9 millimeters thick, which is the familiar 5/16-inch profile that adds almost no height between a base and its top. The maker publishes a maximum load of 1,000 pounds, the highest figure in this roundup, and rates the bearing for turntable tops between 15 and 30 inches in diameter.
The listing describes the plates as 22 gauge steel with a smooth ball action, and the maker suggests a drop of oil on the balls before installation for the quietest spin. For a corner-cabinet turntable, a heavy tool tray or a wide serving board that has to turn without a wobble, this is the bearing to build around. One bearing per pack, so a pair of matching turntables means ordering two.
Specs
- Diameter: 12 inches
- Material: alloy steel
- Maximum load: 1,000 pounds
- Thickness: 7.9 millimeters (5/16 inch)
- Item weight: 1.5 pounds
- Count: pack of 1
- Brand: Woodpeckers
Besimple Aluminium Alloy Turntable Bearing, 12 Inch
The Besimple ring takes the same 12-inch footprint as the pick above and rebuilds it in aluminum. The maker lists an outside diameter of 12 inches, a thickness of about 10 millimeters and a weight of 0.55 kilograms, so the ring itself adds little heft to a build. A single row of ball bearings carries the rotation, and the plates arrive with pre-drilled through holes, so the ring can be screwed down to a base and top rather than left loose between them.
Aluminum is the reason to choose this one over a steel plate of the same size. The listing describes a matte, chamfered finish that resists rust, which suits kitchen turntables, bathroom organizers and shop fixtures near a sink. Soft rubber pads on the faces keep the ring from slipping against smooth surfaces. No load figure is printed in the listing’s specification table, so treat this as the mid-range ring for everyday tops rather than the pick for the heaviest loads.
Specs
- Diameter: 12 inches outside
- Material: aluminum
- Thickness: about 10 millimeters
- Item weight: 0.55 kilograms
- Bearing type: roller bearing, single row of balls
- Mounting: pre-drilled through holes, non-slip rubber pads
- Brand: Besimple
TamBee 20 Inch Lazy Susan Hardware, Aluminum Bearing
Twenty inches is the diameter for the big jobs: wide dining table centers, large puzzle boards and broad display platforms that a 12-inch ring would leave under-supported. The TamBee listing sells the bearing on its own, with no top included, and describes an aluminum bearing built as a metal rotating ring for a base-only installation under a top you supply or build.
Because the ring is aluminum, it stays manageable to handle and position at this size, and it will not rust in a dining room or kitchen setting. Published figures for this listing are limited to the diameter, the aluminum construction and the base-only format, so the Specs block below prints only those confirmed fields. If your top runs wider than about 30 inches, this is the size class to shop in; pair it with a top that overhangs the ring evenly on every side so the load stays balanced over the race.
Specs
- Diameter: 20 inches
- Material: aluminum
- Format: bearing only, no top included
- Use: large table tops, puzzle boards and display platforms
- Brand: TamBee
Dailydanny Aluminum Lazy Susan Turntable Bearing, 8 Inch
The Dailydanny ring covers the middle ground between cabinet hardware and table hardware. It is an 8-inch aluminum alloy ring, silver in color, weighing 0.43 kilograms, with a published maximum weight recommendation of 40 kilograms. The maker describes a thick aluminum surface running on steel balls, with a rust and weather resistant finish, which makes this size a natural fit under plant stands, small glass tops, cake stands and countertop organizers.
Eight inches supports tops in roughly the 12 to 20 inch range when the load stays centered, and the low ring height keeps a small turntable from looking perched. This is the mid-range pick for lighter duty: the published 40-kilogram ceiling is well below the steel plates in this roundup, so keep it under tabletop pieces rather than loaded tool trays or seating.
Specs
- Diameter: 8 inches
- Material: aluminum alloy
- Maximum recommended load: 40 kilograms
- Item weight: 0.43 kilograms
- Color: silver
- Brand: Dailydanny
HSTECH 6 Inch Lazy Susan Turntable, 2 Pack
The smallest bearing here is also the strongest for its size. Each HSTECH plate is 6 inches across, made of alloy steel, and the maker publishes a maximum weight recommendation of 500 pounds, carried on large steel ball bearings in a low-profile plate. The listing sells two plates in a pack, at 0.51 kilograms for the set, which suits paired builds such as matching trays, a monitor riser and a matching stand, or one turntable plus a spare for the next project.
A 6-inch plate is the cabinet and countertop size: spice trays, small serving boards, display stands and craft turntables all sit happily on it. The zinc-toned silver finish resists corrosion in kitchen use. As the budget pick of the group it gives up the machined-ring quietness of the aluminum bearings, and a plate this small should stay under tops no wider than about 24 inches so the overhang does not lever the race.
Specs
- Diameter: 6 inches
- Material: alloy steel
- Maximum load: 500 pounds
- Count: pack of 2
- Item weight: 0.51 kilograms
- Color: silver
- Brand: HSTECH
How to choose
Match the bearing to the top first. A common rule from the makers is that the bearing should measure at least half the diameter of the top it carries: a 12-inch bearing under a 15 to 30 inch top, a 6-inch plate under tops up to about 24 inches, and a 20-inch ring under the widest table centers. A bearing that is too small lets the top tip at the edges; one that is too large can show past the base and collect crumbs and dust in the exposed race.
Then check the load rating against the real weight, top included. Stamped steel plates publish the biggest numbers here, up to 1,000 pounds for the 12-inch Woodpeckers, while the aluminum rings trade raw capacity for quiet running and rust resistance. The Dailydanny ring publishes a modest 40-kilogram ceiling, which is honest guidance for light tabletop duty. Keep the load centered whatever you choose, because every published rating assumes the weight sits over the middle of the race rather than cantilevered off one side.
Material decides where the turntable can live. Aluminum rings shrug off kitchen steam, plant watering and damp basements, and they run with less rumble. Steel plates carry more and shrug off shop abuse, but they belong in dry interiors. Finally, look at the mounting: pre-drilled through holes let you screw the ring to both base and top for a permanent build, while smooth plates with rubber pads suit a loose sandwich layout you may want to lift apart for cleaning.
Who should skip
Skip these bearings if you want a finished turntable out of the box. Every pick here is hardware only, so the top, tray or board is yours to build or supply. Skip them as well if the project is a chair, stool or any seat a person will sit on: these published ratings describe centered, static loads on a flat platform, not the shifting side loads of seating, and swivel chair mechanisms are a different product built for that job. If your top is glass and you cannot drill or clamp it, look for a bearing bundled with a bonded glass top instead of loose hardware.
FAQ
How far should a turntable top overhang its bearing?
Keep the overhang even on all sides and modest in size. Makers of the 12-inch plates rate them for tops 15 to 30 inches across, which works out to a few inches of overhang per side. Wide, even overhang on a centered load is fine; a long overhang on one side only will lever the race and make the spin rough.
Do lazy Susan bearings need lubrication?
Most arrive with the balls lightly oiled or greased from the factory. The Woodpeckers listing suggests adding a drop of oil to the balls before installation for the quietest action. If a bearing grows noisy after months of kitchen or shop dust, a wipe of the race and a fresh drop of light oil usually restores the smooth spin.
Can I screw a bearing down, or does it sit loose?
Both layouts work. Rings with pre-drilled through holes, like the Besimple above, are made to be screwed to the base and the underside of the top. Smooth plates are often simply sandwiched between base and top, held by weight and by rubber pads. Screwing down is the better choice for tall or top-heavy pieces that could slide.
What is the difference between steel plate and aluminum ring bearings?
Steel plate bearings are stamped as two flat plates with a ball race between them, and they publish the highest load ratings. Aluminum ring bearings are machined rings that run quieter, weigh less and resist rust, which suits kitchens and damp rooms. Choose steel for maximum capacity in a dry shop and aluminum for quiet, corrosion-free service.
Final verdict
Build around the Woodpeckers 12-inch steel bearing when one turntable has to carry real weight without complaint, and choose the Besimple 12-inch aluminum ring when the same footprint will live in a kitchen or damp corner. The TamBee 20-inch ring covers the wide table tops the smaller bearings cannot support, the Dailydanny 8-inch ring handles light tabletop duty, and the HSTECH 6-inch two-pack is the budget way to put small trays and displays on a strong steel plate.
Product and ASIN Reference
| Name | ASIN |
|---|---|
| Woodpeckers Lazy Susan Hardware, 12 Inch, Pack of 1 | B071ZD31Z5 |
| Besimple Aluminium Alloy Turntable Bearing, 12 Inch | B09812QCXB |
| TamBee 20 Inch Lazy Susan Hardware, Aluminum Bearing | B06XCDH841 |
| Dailydanny Aluminum Lazy Susan Turntable Bearing, 8 Inch | B07T2C6VDH |
| HSTECH 6 Inch Lazy Susan Turntable, 2 Pack | B0BX65794T |
Related guides
Read next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.





Write Your Review
No reviews yet. Be the first to share your experience!