Our Top Picks
What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Dovetail Jigs for Drawers and Boxes: 5 Top Picks
- Top Pick: Porter-Cable 4216 Super Jig
- Runner-up: Porter-Cable 4212 Deluxe Dovetail Jig
- Also consider: Leigh D4R Pro Dovetail Jig
If you build drawers and boxes regularly, the best dovetail jig for you is the Porter-Cable 4216 Super Jig, because its three machined aluminum templates cover half-blind drawer joints, through dovetails, box joints, and even miniature dovetails for small boxes in one kit. Woodworkers who want a simpler two-template setup should look at the Porter-Cable 4212, while anyone who needs custom pin spacing or wider boards should step up to the Leigh D4R Pro. On the simpler end, the Powertec 71529 template system handles through dovetails in stock of almost any width, and the General Tools 861 is a compact budget pick that clamps straight onto the workpiece.
As an Amazon Associate, we earn from qualifying purchases.
Contents
Table of Contents
- Quick Answer
- Porter-Cable 4216 Super Jig
- Porter-Cable 4212 Deluxe Dovetail Jig
- Leigh D4R Pro Dovetail Jig
- Powertec 71529 Dovetail Jig System
- General Tools 861 Dovetailer Jig
- How to Choose a Dovetail Jig for Drawers and Boxes
- FAQ
- Conclusion
- Product and ASIN Reference
Quick Answer
For most drawer and box work, choose the Porter-Cable 4216: it cuts half-blind, through, sliding, and miniature dovetails plus box joints in boards up to 12 inches wide, and the bits and guides are in the box. Pick the Leigh D4R Pro instead if you want variable pin spacing and 24-inch capacity, or the General Tools 861 if you want the smallest, simplest budget jig.
Porter-Cable 4216 Super Jig
The 4216 is the most complete fixed-template kit in this roundup, and it earns the top spot for drawer and box builders because it covers the widest range of joints without any optional extras. Its 4211 template handles the half-blind dovetails that most drawers use, along with rabbeted half-blind and sliding dovetails. The 4213 template adds through dovetails and box joints, which are the joints most small boxes call for. Uniquely here, the included 4215 mini template cuts miniature through and half-blind dovetails, so jewelry boxes, small keepsake boxes, and narrow drawer parts are all within reach of the same jig.
The templates are machined aluminum, and the kit includes the two router bits, two template guides, lock nuts, and a wrench needed to start cutting. On-board router bit depth gauges and template alignment lines speed up repeat setups, which matters when you are batching out a full set of drawer boxes. Like the other Porter-Cable jigs here, it accepts stock from 1/4 inch to 1-1/8 inches thick and up to 12 inches wide, a range that covers typical drawer sides and box panels. This is a mid-range kit, and it is the one to buy if you want one jig that handles both everyday drawers and finer small-box work.
Specs
- Board capacity: up to 12 inches wide
- Stock thickness: 1/4 inch to 1-1/8 inches
- Templates included: 4211, 4213, and 4215 mini template
- Joint types: half-blind, rabbeted half-blind, sliding, and through dovetails, box joints, miniature dovetails
- Template material: machined aluminum
- Included: two router bits, two template guides, two lock nuts, wrench
- Tier: mid-range
Porter-Cable 4212 Deluxe Dovetail Jig
The 4212 is the classic two-template version of the same system, and it remains a strong choice for woodworkers whose work is mostly standard drawers and medium boxes. It pairs the 4211 template for half-blind, rabbeted half-blind, and sliding dovetails with the 4213 template for through dovetails and box joints, so the two joints that dominate drawer and box construction are both covered. The package includes the jig base, both templates, two router bits, two template guides, two lock nuts, a wrench, and the operating instructions.
Because the 4212 shares the same platform as the 4216, it offers the same stock range: boards up to 12 inches wide and from 1/4 inch to 1-1/8 inches thick. Machined aluminum templates and built-in alignment lines keep pins and tails registered consistently from one drawer side to the next. What you give up versus the 4216 is the mini template, so very small boxes with miniature joints are off the menu unless you add that template later. For a shop that builds cabinet drawers, case drawers, and storage boxes in ordinary sizes, that trade-off rarely matters. The 4212 sits in the mid-range tier and is the sensible pick when the 4216’s extra template would go unused.
Specs
- Board capacity: up to 12 inches wide
- Stock thickness: 1/4 inch to 1-1/8 inches
- Templates included: 4211 and 4213
- Joint types: half-blind, rabbeted half-blind, sliding, and through dovetails, box joints
- Template material: machined aluminum
- Included: two router bits (43776PC and 43743PC), two template guides (42040 and 42046), two lock nuts, wrench
- Tier: mid-range
Leigh D4R Pro Dovetail Jig
The D4R Pro is the premium option here, and it is built for woodworkers who find fixed, evenly spaced pins too plain for fine boxes and furniture drawers. Instead of a fixed comb, it uses individually adjustable guide fingers, so pin and tail spacing is fully variable: you can cluster narrow pins at the corners and widen the tails in between, the way hand-cut dovetails are laid out. That single feature separates it from every fixed-template jig in this roundup.
Capacity is the other headline. The D4R Pro handles boards up to 24 inches wide, double the Porter-Cable and Powertec kits, which opens up deep drawers, wide blanket-chest panels, and large casework boxes. Published Leigh data lists through dovetails in stock up to 1-1/4 inches thick, with even thicker capacity for half-blind work, and the Leigh e-Bush guide bushing allows fine adjustment of joint fit. Through, half-blind, and sliding dovetails are standard, and optional templates extend the jig to box joints and specialty joints. The trade-offs are a longer learning curve and a premium tier position. If your boxes are presentation pieces rather than utility drawers, this is the jig that matches that ambition.
Specs
- Board capacity: up to 24 inches wide
- Spacing: fully variable pin and tail spacing with adjustable guide fingers
- Stock thickness: up to 1-1/4 inches for through dovetails
- Joint types: through, half-blind, and sliding dovetails; box joints with optional template
- Guide system: Leigh e-Bush template guide bushing for fit adjustment
- Construction: aluminum extrusion body with adjustable side stops
- Tier: premium
Powertec 71529 Dovetail Jig System
The 71529 takes a completely different approach from the bench-mounted comb jigs above. It is a template system built around a single 15-inch phenolic template guide that clamps or mounts to the workpiece itself, and it is designed to cut through dovetails to any width, without test cuts or layout marking. Because the template travels with the board rather than sitting in a fixed frame, board width is effectively unlimited, which makes it interesting for wide box panels and long drawer parts that will not fit a 12-inch jig.
The kit is deliberately minimal: the phenolic template, one straight edge router bit, one 7-degree dovetail bit, and mounting screws. It works with a handheld router or on a router table, and Powertec positions it for small to mid-sized projects such as boxes, drawers, and cabinets. The limits follow from the design. Through dovetails are the only joint on offer, so there are no half-blind drawer fronts, and fit depends on careful template placement rather than a registered clamping frame. As a budget tier, portable complement to a main jig, or as a first dovetail system for through-jointed boxes, it makes a practical case for itself.
Specs
- Template: 15-inch phenolic template guide
- Joint types: through dovetails, cut to any board width
- Included: straight edge router bit, 7-degree dovetail bit, mounting screws
- Router use: handheld router or router table
- Template dimensions: 15 by 4.88 by 0.47 inches
- Best suited to: small to mid-sized boxes, drawers, and cabinets
- Tier: budget
General Tools 861 Dovetailer Jig
The 861 is the simplest jig in this roundup: a one-piece aluminum body that clamps directly onto the edge of the board, self-aligning so both halves of the joint register evenly. There is no bench frame, no template swapping, and almost nothing to assemble, which makes it a friendly first dovetail jig and a handy option for small shops where a full-size jig would live in a cupboard. It works with a handheld router or a router table.
General Tools includes a 14-degree, 1/2-inch dovetail router bit with a 1/2-inch shank, so the kit is ready to cut out of the box. Published specifications cover stock from 1/2 inch to 1 inch thick and boards up to 12 inches wide, a range aimed squarely at drawer sides and small to medium boxes. The jig produces half-blind and through dovetails and can also cut box joints. What it does not offer is adjustability: pin spacing and joint geometry are fixed by the template, and the one-piece design gives you less clamping support on wide or heavy boards than a frame jig. In the budget tier, though, its simplicity is the point. For occasional drawers and gift boxes, it delivers tidy joints with the shortest setup of any pick here.
Specs
- Design: one-piece aluminum body, self-aligning, clamps to the workpiece
- Board capacity: up to 12 inches wide
- Stock thickness: 1/2 inch to 1 inch
- Joint types: half-blind and through dovetails, box joints
- Included: 14-degree, 1/2-inch dovetail router bit with 1/2-inch shank
- Router use: handheld router or router table
- Tier: budget
How to Choose a Dovetail Jig for Drawers and Boxes
Start with the joints your projects actually use. Most drawers are built with half-blind dovetails at the front and through dovetails at the back, while boxes usually show through dovetails or box joints on every corner. If that describes your work, a two-template fixed jig such as the Porter-Cable 4212 covers everything. Add miniature work, such as jewelry boxes and small drawers, and the 4216’s mini template earns its place. Choose a variable-spacing jig like the Leigh D4R Pro only if the look of hand-laid-out pins matters to you, because that flexibility costs setup time on every joint.
Next, check capacity against your typical parts. Twelve inches of board width covers most drawer sides and small boxes, but deep drawers, wide box lids, and chest panels quickly exceed it; the D4R Pro’s 24-inch capacity or the Powertec template’s width-free approach solve that problem in different ways. Confirm stock thickness too, since thin box stock under 1/2 inch rules out the General Tools 861, while every jig here handles standard 1/2-inch and 3/4-inch drawer material.
Finally, think about workflow. Frame jigs with clamps reward batch production: set up once and rout a whole set of drawers. Template-on-board systems and clamp-on jigs set up faster for one-off pieces but demand more care per cut. Whichever style you pick, confirm your router accepts the guide bushings or bearing-guided bits the jig requires before ordering.
FAQ
What size dovetail jig do I need for drawers?
A 12-inch jig covers the vast majority of drawers, because drawer sides are rarely wider than 10 to 12 inches. Step up to an 18-inch or 24-inch jig only if you build deep storage drawers or wide boxes. For wide panels, a template system such as the Powertec 71529 avoids the width limit entirely by riding on the board itself.
Can one jig cut both half-blind and through dovetails?
Yes. Most full kits, including the Porter-Cable 4212 and 4216 and the Leigh D4R Pro, cut both joint types by swapping templates or reconfiguring the finger assembly. Half-blind dovetails hide the joint on drawer fronts, while through dovetails show the interlocking pins and tails, which suits boxes and drawer backs.
Do dovetail jigs include the router bits?
Some do and some do not. The Porter-Cable kits, the Powertec 71529, and the General Tools 861 all include the bits their templates need, while larger systems may require specific bits or guide bushings matched to the jig. Always check the listing for the exact bit sizes and shank diameter your router accepts before buying.
Are fixed-template jigs accurate enough for fine boxes?
For utility drawers and everyday boxes, yes: machined aluminum templates produce consistent, repeatable joints. The limitation is appearance, not strength, because the pins are evenly spaced. If you want the varied pin spacing of hand-cut work on presentation boxes, a variable-spacing jig such as the Leigh D4R Pro is the better tool.
Conclusion
For most woodworkers building drawers and boxes, the Porter-Cable 4216 is the best dovetail jig to buy: three templates, included bits, and miniature-joint capability in one mid-range kit. The 4212 trims that formula down for standard drawer work, the Leigh D4R Pro serves makers who want variable spacing and 24-inch capacity, the Powertec 71529 frees through dovetails from any width limit, and the General Tools 861 keeps things simple and affordable. Match the jig to the joints and board sizes you actually cut, and any of these five will turn out clean, strong drawer and box corners.
Related guides
Read next
- Best Band Clamps for Picture Frames, Boxes and Drawers
- Best Marking Knives for Dovetails: 5 Thin-Blade Picks
- Best Doweling Jigs for Accurate, Repeatable Wood Joints
- Best Self-Centering Doweling Jigs: 5 Picks for 2026
- Best Random Orbit Sanders for Smooth Wood Finishes
- Best Carving Gouges and Chisel Sets for Spoon Carving
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




Write Your Review
No reviews yet. Be the first to share your experience!