Key takeaways
- Compare the best planer blades by length, width, steel and pack count, with stated fit for DeWalt, Ridgid, Delta, WEN, Grizzly and Craftsman planers.
What's inside
- Table of Contents
- What to check before buying planer blades
- JTEX Planer Blades for DeWalt DW735 and DW735X
- POWERTEC 12828 Planer Blades for Ridgid R4330 and TP1300LS
- POWERTEC 12803 Planer Blades for 12-1/2-Inch Benchtop Planers
- Dirtech 13-Inch HSS Planer Blades for Delta, WEN and Grizzly
- POWERTEC 128050 Planer Blades for 15-Inch Delta and Grizzly Planers
- Blade care and changeover notes
- Frequently asked questions
- Conclusion
- Table of Contents
- What to check before buying planer blades
- JTEX Planer Blades for DeWalt DW735 and DW735X
- POWERTEC 12828 Planer Blades for Ridgid R4330 and TP1300LS
- POWERTEC 12803 Planer Blades for 12-1/2-Inch Benchtop Planers
- Dirtech 13-Inch HSS Planer Blades for Delta, WEN and Grizzly
- POWERTEC 128050 Planer Blades for 15-Inch Delta and Grizzly Planers
- Blade care and changeover notes
- Frequently asked questions
- Conclusion
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
Home › Uncategorized › Best Planer Blades for Benchtop and 15-Inch Planers
The best planer blades are the ones that match your machine exactly: same length, same width, same thickness, and the same mounting pattern as the knives the planer shipped with. For the DeWalt DW735 and DW735X, the JTEX 13-inch set is a direct DW7352 replacement in high speed steel. Ridgid R4330 and TP1300LS owners are covered by the POWERTEC 12828 three-knife set. Shops running 12-1/2-inch benchtop planers from Craftsman, WEN, Delta, Grizzly or Porter Cable can use the POWERTEC 12803 two-knife set, while the Dirtech 13-inch set spans Delta, WEN, Grizzly, Ryobi and Metabo models in M2 high speed steel. For 15-inch stationary planers from Delta and Grizzly, the POWERTEC 128050 set is the heavy-duty pick. Every set below is listed with its published dimensions, steel type, pack count and stated model compatibility, so you can match a set to your cutterhead before ordering.
As an Amazon Associate, we earn from qualifying purchases.
Contents
- Table of Contents
- What to check before buying planer blades
- JTEX Planer Blades for DeWalt DW735 and DW735X
- POWERTEC 12828 Planer Blades for Ridgid R4330 and TP1300LS
- POWERTEC 12803 Planer Blades for 12-1/2-Inch Benchtop Planers
- Dirtech 13-Inch HSS Planer Blades for Delta, WEN and Grizzly
- POWERTEC 128050 Planer Blades for 15-Inch Delta and Grizzly Planers
- Blade care and changeover notes
- Frequently asked questions
- Conclusion
Table of Contents
- What to check before buying planer blades
- JTEX Planer Blades for DeWalt DW735 and DW735X
- POWERTEC 12828 Planer Blades for Ridgid R4330 and TP1300LS
- POWERTEC 12803 Planer Blades for 12-1/2-Inch Benchtop Planers
- Dirtech 13-Inch HSS Planer Blades for Delta, WEN and Grizzly
- POWERTEC 128050 Planer Blades for 15-Inch Delta and Grizzly Planers
- Blade care and changeover notes
- Frequently asked questions
- Conclusion
- Product and ASIN Reference
What to check before buying planer blades
Blade length comes first. Benchtop thickness planers use knives that match the width of the cutterhead, most often 12 inches, 12-1/2 inches or 13 inches, while stationary 15-inch planers use full 15-inch knives. A blade that is even slightly too long will not seat in the cutterhead, and one that is too short leaves an unplaned ridge along one edge of the board. Match the replacement set to the knife you remove rather than to the nominal width of the machine.
Width and thickness matter just as much. Disposable benchtop knives are thin, commonly 1/16 inch, and locate on pins or machined holes in the cutterhead. Traditional stationary planer knives are thicker, commonly 1/8 inch, and are clamped by gibs and bolts, then set to height with a gauge or jig. A knife with the wrong thickness will not clamp correctly, and a disposable knife with locator holes in the wrong position will not align with the pins on the head. Compare all three dimensions, length by width by thickness, against the published figures for the set you are considering.
Steel type decides how the edge behaves. High speed steel, often shortened to HSS, is the standard material for planer knives. It takes a fine edge, tolerates the heat of continuous cutting, and on resharpenable knives it can be honed or ground back to sharp many times. M2 high speed steel is a common grade for replacement knives and is the material DeWalt uses in its own DW7352 knives, described by the maker as M2 laminated tool steel. Carbide and carbide-tipped knives sit at the premium end of the market. They hold an edge longer in abrasive stock and in glue-heavy material such as plywood and laminated boards, but they are ground on one edge only in most benchtop formats.
Edge count is the next thing to check. Many benchtop knives are double sided, also called reversible or disposable. When the first edge dulls or nicks, you flip the knife and work with the second edge, which doubles the service you get from each knife. Stationary planer knives are usually single edged and resharpenable, so their value sits in repeated grinding rather than in a spare edge. Pack count ties into this as well. Sets are sold with two knives for two-knife cutterheads and three knives for three-knife heads.
Finally, confirm the stated compatibility list. Aftermarket makers publish the exact planer models and the original part numbers each set replaces, such as DW7352 for the DeWalt 13-inch planers or AC20502 for the Ridgid machines. Matching that part number is the most reliable way to confirm fit, because two planers with the same nominal width can still use knives of different widths, thicknesses and hole patterns.
JTEX Planer Blades for DeWalt DW735 and DW735X
The DW735 and DW735X are three-knife planers, and this JTEX set follows the original DW7352 pattern with three disposable knives per pack. Each knife measures 13 inches long, 7/8 inch wide and 1/16 inch thick, the published dimensions for the DeWalt 13-inch cutterhead. The knives are made from high speed steel and are double sided, so each knife carries two cutting edges. When the first edge loses its bite or picks up a nick from a staple or a gritty knot, the knife can be turned and the fresh edge put to work, which keeps a busy shop moving without a trip to a sharpening service.
Machined locator holes in each knife line up with the pins on the DW735 cutterhead, the same alignment system the factory knives use. That makes changeovers a matter of lifting the old set out and dropping the new set in, with the holes settling each knife at the correct height. For owners who plane a mix of domestic hardwoods and construction lumber, this budget-tier set is the straightforward way to keep genuine-pattern spare knives on hand for the most common benchtop planer in the category.
Specs
- Blade length: 13 inches
- Blade width: 7/8 inch
- Blade thickness: 1/16 inch
- Material: High speed steel (HSS)
- Pack count: 3 knives
- Edges: Double sided
- Stated compatibility: DeWalt DW735, DW735X
- Replaces: DeWalt DW7352
POWERTEC 12828 Planer Blades for Ridgid R4330 and TP1300LS
Ridgid benchtop planers use their own knife pattern, and the POWERTEC 12828 set is built to that pattern as a replacement for the Ridgid AC20502 knife set. The pack holds three 13-inch knives, matching the three-knife cutterhead fitted to the R4330 and the earlier TP1300LS. POWERTEC machines its replacement knives from high speed steel, and the set is published as a direct replacement for the original Ridgid part, which removes the guesswork that comes with measuring worn knives that may already have been ground down or damaged.
Because the R4330 and TP1300LS share the same knife specification, one set covers both the current machine and the long-running earlier model. Keeping a spare set in the shop means a nicked knife found mid-project, usually the result of a hidden fastener or a pocket of dirt in reclaimed stock, becomes a short pause instead of a lost day. This mid-range set suits Ridgid owners who want an exact-pattern spare set matched to one published part number.
Specs
- Blade length: 13 inches
- Material: High speed steel (HSS)
- Pack count: 3 knives
- Stated compatibility: Ridgid R4330, Ridgid TP1300LS
- Replaces: Ridgid AC20502
POWERTEC 12803 Planer Blades for 12-1/2-Inch Benchtop Planers
A large group of 12-1/2-inch benchtop planers share one knife specification, and the POWERTEC 12803 set is published for that whole group. The set contains two knives, matching the two-knife cutterheads used across these machines, and POWERTEC lists compatibility with the Craftsman CMEW320 and 21758, the WEN PL1252 and 6550, the Delta 22-560, 22-565, TP305 and TP400LS, the Grizzly G0663, the Porter Cable PC305TP and POWERTEC’s own PL1252. The knives are high speed steel, the standard material for this class of disposable benchtop knife.
This broad fit list is useful in shops that run more than one small planer, and for owners of discontinued models whose maker no longer stocks knives under the old part numbers. The two-knife format also keeps the set in the budget tier. As with any shared-specification set, compare the knife you remove with the published 12-1/2-inch length before fitting, since a small number of look-alike models use a different knife width.
Specs
- Blade length: 12-1/2 inches
- Material: High speed steel (HSS)
- Pack count: 2 knives
- Stated compatibility: Craftsman CMEW320, Craftsman 21758, WEN PL1252, WEN 6550, Delta 22-560, Delta 22-565, Delta TP305, Delta TP400LS, Grizzly G0663, Porter Cable PC305TP, POWERTEC PL1252
Dirtech 13-Inch HSS Planer Blades for Delta, WEN and Grizzly
The Dirtech set covers the other big family of 13-inch benchtop planers, the group built around the Delta 22-580 pattern. Each knife measures 13 inches long, 15/32 inch wide and 1/16 inch thick, and the set of three is made from M2 premium high speed steel. The knives are double sided, giving two working edges per knife, and the set ships in a plastic case that keeps the spare edges protected in a drawer or toolbox.
Dirtech publishes a long compatibility list for this set: Delta 22-549, 22-555 and 22-580, WEN 6552, 6552T and PL1303, Grizzly G0689, Ryobi AP1300, Metabo DH330, Craftsman 21743, Steel City 40100 and POWERTEC PL1300. That spread makes this mid-range set a practical spare for shops running any of those machines, and the M2 steel grade matches the material specification used in many factory knife sets for this planer family. Owners of the WEN 6552 and 6552T in particular will find this one of the few sets that names those models directly in its published fit list.
Specs
- Blade length: 13 inches
- Blade width: 15/32 inch
- Blade thickness: 1/16 inch
- Material: M2 high speed steel (HSS)
- Pack count: 3 knives
- Edges: Double sided
- Stated compatibility: Delta 22-549, Delta 22-555, Delta 22-580, WEN 6552, WEN 6552T, WEN PL1303, Grizzly G0689, Ryobi AP1300, Metabo DH330, Craftsman 21743, Steel City 40100, POWERTEC PL1300
POWERTEC 128050 Planer Blades for 15-Inch Delta and Grizzly Planers
Stationary 15-inch planers use a different class of knife altogether, and the POWERTEC 128050 set is built for them. Each knife measures 15 inches long, 1 inch wide and 1/8 inch thick, the standard dimension for the three-knife cutterheads in this machine class. The set holds three knives in high speed steel, heat treated for edge retention under the heavier cuts and longer runs that floor-standing planers handle. POWERTEC publishes the set as a replacement for the Delta 22-677 knives, with stated compatibility across the Delta DC-380, 22-677, 22-680, 22-780X, 22-785X, 22-790X and 22-795X, plus the Grizzly G0453 and G1021.
Unlike the thin disposable knives in benchtop machines, these 1/8-inch knives are clamped in the cutterhead and set to height, and they can be resharpened when the edge dulls. The thicker section also shrugs off the occasional nail strike or mineral streak in reclaimed lumber with a nick that can be shifted or ground out rather than ending the knife. For owners keeping an older Delta or Grizzly 15-inch planer in service, this premium-tier set is the published-fit option that keeps the machine cutting.
Specs
- Blade length: 15 inches
- Blade width: 1 inch
- Blade thickness: 1/8 inch
- Material: High speed steel (HSS), heat treated
- Pack count: 3 knives
- Stated compatibility: Delta DC-380, Delta 22-677, Delta 22-680, Delta 22-780X, Delta 22-785X, Delta 22-790X, Delta 22-795X, Grizzly G0453, Grizzly G1021
- Replaces: Delta 22-677 planer knives
Blade care and changeover notes
Store spare knives in the case or sleeve they arrived in, with edges separated, because two loose knives knocking together in a drawer will nick each other before they ever meet wood. Handle every knife by its dull back edge and wear gloves during changeovers. On disposable-knife machines, clean the cutterhead pockets and locator pins before fitting a new set, because packed dust under a knife can lift one end and leave a tapered cut. On stationary machines, set knife height evenly across the head and tighten the gib bolts from the center outward, following the planer maker’s published procedure. When an edge nicks, a small sideways shift of one knife, where the maker allows it, can move the nick out of line with its neighbors and clean up the surface until the next full change.
Frequently asked questions
How do I match replacement planer blades to my planer?
Match the model number and the original knife part number first, then confirm the three published dimensions of the replacement set, length by width by thickness, against the knife you removed. Planers with the same nominal width can use different knife widths and mounting patterns, so the part number the set replaces, such as DW7352 or AC20502, is the most reliable fit check.
What is the difference between HSS and carbide planer blades?
High speed steel takes a fine edge, is used in nearly all disposable benchtop knives, and can be resharpened in its thicker stationary formats. Carbide and carbide-tipped knives hold an edge longer in abrasive and glue-heavy stock, but they sit in the premium tier, are usually ground on one edge, and need diamond abrasives for any touch-up work.
Can disposable planer knives be sharpened?
Disposable benchtop knives are not made to be resharpened. They are thin, they locate on pins or holes at a fixed height, and removing steel would change that height. They are double sided instead, so a dull or nicked edge is handled by flipping the knife to its second edge and then replacing the set when both edges are spent.
How many blades come in a planer blade set?
Pack count follows the cutterhead. Two-knife planers take sets of two, three-knife planers take sets of three, and some packs bundle two complete sets for owners who want a spare ready. Always replace the full set at once so every knife in the head has the same height and the same edge condition.
Conclusion
The right planer blade set is the one whose published length, width, thickness and part number line up with your machine. DeWalt DW735 owners are served by the JTEX set in the factory DW7352 pattern, Ridgid owners by the POWERTEC 12828, and the two big benchtop families by the POWERTEC 12803 for 12-1/2-inch two-knife machines and the Dirtech set for the 13-inch Delta-pattern machines. For 15-inch stationary planers, the POWERTEC 128050 brings the thicker, resharpenable knife format those cutterheads need. Check the part number your planer maker lists for its knives, compare the dimensions, and keep one spare set in the shop so a dull or nicked edge never stops a project for long.
Related guides
Read next
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.



Write Your Review
No reviews yet. Be the first to share your experience!